CPIM-Part-2 APICS Certified in Planning and Inventory Management(Part 2) Free Practice Exam Questions (2025 Updated)

A priority control technique is a method of determining the sequence and timing of production orders in a manufacturing system. A priority control technique can be either push or pull, depending on whether the production orders are initiated by the upstream or downstream processes. A cellular production system is a process of manufacturing that organizes the machines and workers into self-contained cells that can produce different products efficiently and flexibly. A cellular production system is usually based on the principles of lean manufacturing and group technology, which aim to eliminate waste and improve quality.

A pull production activity control (PAC) is a priority control technique that is most appropriate for a firm using a cellular production system. A pull PAC is a method of controlling the flow of materials and work-in-progress in a manufacturing system by using signals from the downstream processes to trigger the release of production orders from the upstream processes. A pull PAC helps to reduce inventory, lead time, and overproduction, as well as to synchronize the production with the customer demand. A pull PAC can be implemented using various techniques, such as kanban cards, containers, or electronic signals.

A shortest processing time (SPT) rule is a priority control technique that assigns the highest priority to the production order that has the shortest processing time at each workstation. An SPT rule helps to minimize the average waiting time and flow time of the production orders, as well as to increase the utilization of the machines and workers. However, an SPT rule does not consider the due dates or the customer demand of the production orders, and may result in poor customer service or low delivery performance.

A distribution requirements planning (DRP) is a priority control technique that determines the quantity and timing of finished goods to be delivered to various distribution centers or customers. A DRP is based on the forecasted demand, the inventory status, and the transportation lead time of the finished goods. A DRP helps to optimize the inventory level, reduce stockouts, and improve customer service. However, a DRP is not suitable for a cellular production system, as it does not control the flow of materials and work-in-progress within the manufacturing system.

A push production activity control (PAC) is a priority control technique that initiates the production orders based on the master production schedule or the forecasted demand from the upstream processes. A push PAC releases the production orders in batches or lots, regardless of the capacity or status of the downstream processes. A push PAC may result in high inventory, long lead time, and overproduction, as well as low flexibility and responsiveness to customer demand. A push PAC is not compatible with a cellular production system, as it contradicts the principles of lean manufacturing and group technology. References: CPIM Exam Content Manual Version 7.0, Domain 6: Plan, Manage, and Execute Detailed Schedules, Section 6.1: Detailed Scheduling Concepts, p. 36; Cellular manufacturing; [Production Activity Control].

The bullwhip effect is a supply chain phenomenon that causes fluctuations in demand to amplify as they move upstream, from the consumer to the retailer, to the distributor and then to the producer1. The bullwhip effect can result in inefficiencies and costs such as excess inventory, lost revenues, superfluous capacity and poor customer service1.

One of the activities that would be effective to mitigate the bullwhip effect is to reduce lead times, which are the time intervals between placing an order and receiving the goods2. Reducing lead times can help to reduce the uncertainty and variability in demand, as well as improve the responsiveness and flexibility of the supply chain2. By reducing lead times, the supply chain partners can order less frequently and in smaller quantities, while still meeting customer demand. This can reduce the need for safety stock, cycle stock and pipeline stock, and thus lower the inventory carrying costs and risks2.

The other options are not effective activities to mitigate the bullwhip effect. Implementing track and trace technology, which is a method for tracking the origin, history, location and status of a product or its parts throughout the supply chain3, may help to improve the visibility and transparency of the supply chain, but it may not reduce the demand fluctuations or inventory imbalances caused by the bullwhip effect. Using a push system, which is a production system where goods are produced based on forecasted demand rather than actual customer orders4, may increase the risk of overproduction or underproduction, as well as create more inventory and waste in the supply chain. Increasing inventory, which is the stock of goods or materials held by a company to meet customer demand5, may increase the inventory carrying costs and risks, as well as tie up cash flow and working capital.

References : Lead Time Reduction: Definition & Benefits; The bullwhip effect: causes, intensity, and mitigation - Academia.edu; What is Traceability in Supply Chain Management?; Push vs Pull System: What Is The Difference?; Inventory Definition.

 Exponential smoothing is a forecasting method that assigns weights to past observations, with more recent observations having higher weights. The alpha value is the smoothing constant that determines how much weight is given to the most recent observation. A low alpha value means that the forecast is based more on the historical average, while a high alpha value means that the forecast is more responsive to the latest changes in demand. A company with stable demand would typically use a low alpha value to smooth out random fluctuations and obtain a more accurate forecast. A beta value is another smoothing constant that is used for trend-adjusted exponential smoothing, which accounts for the presence of a linear trend in the data. A low beta value means that the trend component is based more on the historical average, while a high beta value means that the trend component is more responsive to the latest changes in demand. A company with stable demand would not need to use trend-adjusted exponential smoothing, since there is no significant trend in the data. References := CPIM Part 2 Exam Content Manual, Domain 3: Plan and Manage Demand, Section C: Forecast Demand, Subsection 2: Select appropriate forecasting technique(s) (p. 16)

Operations strategy is the process of aligning the operations function with the strategic goals of the organization. It involves translating market requirements into operations decisions that support the competitive priorities of the organization. Operations strategy is not a bottom-up reflection of what the whole group or business wants to do, but rather a top-down alignment of the operations function with the overall business strategy. Operations strategy is not a top-down activity where operations improvements cumulatively build strategy, but rather a deliberate and coherent plan that guides the design and management of the operations system. Operations strategy is not only about exploiting operations capabilities in the global market, but also about developing and sustaining those capabilities in response to the changing market needs.

References := What Is an Operations Strategy? Definition and Benefits, Operations Strategy: Definition And Impact On Projects - monday.com, Operations Strategy: Definition, Example & Strategies In 2022

Mean time between failures (MTBF) is the predicted elapsed time between inherent failures of a mechanical or electronic system during normal system operation1. MTBF can be calculated as the arithmetic mean (average) time between failures of a system1. MTBF is a useful measure of reliability, because it indicates how long a system is likely to work before failing. The higher the MTBF, the more reliable the system2. Reliability is the probability that a system will perform its intended function without failure for a specified period of time under specified conditions3.

The other statements about MTBF are false. MTBF is not used for non-repairable products, but for repairable systems. For non-repairable products, mean time to failure (MTTF) is used instead4. MTTF is the expected time to failure for a non-repairable system1. An increase in MTBF is not proportional to an increase in quality, because quality is not only determined by reliability, but also by other factors such as performance, functionality, durability, and customer satisfaction5. MTBF is not the same as operating life or service life, because operating life or service life is the total time that a system can operate before it reaches the end of its useful life, while MTBF is the average time between failures during the operating life6.

Mixed-model scheduling is a production technique that allows for the simultaneous production of different products or features on the same production line or system. Mixed-model scheduling can help reduce lead times, inventory levels, setup times, and material shortages by increasing the flexibility and responsiveness of the production process. One of the benefits of mixed-model scheduling is improved demand response, which means the ability to meet customer demand without delay or stockout. Improved demand response can enhance customer satisfaction and loyalty, as well as reduce the need for safety stock or buffer inventory. By using mixed-model scheduling, a company can produce products or features according to the actual or forecasted customer demand, rather than producing large batches of standardized products or features. This can help avoid overproduction or underproduction, which can result in excess inventory or lost sales. Mixed-model scheduling can also help adjust the production output quickly and easily when there are changes or fluctuations in demand, by using flexible automation, lean production techniques, or quick response methods.

The other options are not benefits of mixed-model scheduling. Increased inventory is not a benefit of mixed-model scheduling, but rather a drawback. Increased inventory can increase inventory costs, such as holding costs, transportation costs, or obsolescence costs. It can also reduce inventory visibility and control, as well as increase the risk of quality issues or spoilage. Mixed-model scheduling can help reduce inventory by producing products or features in small batches or single units that match customer demand. Fewer setups are not a benefit of mixed-model scheduling, but rather a requirement. Fewer setups mean less time and resources spent on changing or adjusting the production system to produce different products or features. Fewer setups can increase the efficiency and productivity of the production process, as well as reduce the setup costs and waste. Mixed-model scheduling requires fewer setups to enable the simultaneous production of different products or features on the same production line or system. Fewer material shortages are not a benefit of mixed-model scheduling, but rather an outcome. Fewer material shortages mean less disruption or delay in the production process due to the lack of materials or components needed for production. Fewer material shortages can improve the quality and reliability of the production process, as well as reduce the material costs and waste. Mixed-model scheduling can result in fewermaterial shortages by reducing the lead times and inventory levels of materials or components, as well as by improving the communication and coordination with suppliers.

References := Mixed Model Scheduling - Mountain Home Academy, Reduce Lot Sizes, Mixed Model Scheduling - Academic library, Introduction To Mixed Model Production …{Strategos}

A3 method is a tool that can be used in a root cause corrective action process to determine the problem of a machine that is suddenly having excessive downtime. A3 method is a structured problem-solving approach that follows the Plan-Do-Check-Act (PDCA) cycle and uses a single sheet of paper (A3 size) to document the problem, analysis, countermeasures, and results1. A3 method can help identify the root cause of a problem by using tools such as the 5 Whys or the fishbone diagram, and then develop and implement effective corrective actions to prevent recurrence2. A3 method can also help communicate the problem and the solution to stakeholders, as well as monitor and evaluate the outcomes3.

The steps of the A3 method are4:

Step 1: Define the problem and its impact. Describe the current situation, the gap between the actual and the desired state, and the scope and magnitude of the problem.

Step 2: Identify the root cause of the problem. Use tools such as the 5 Whys or the fishbone diagram to analyze the factors that contribute to the problem and drill down to its root cause.

Step 3: Propose countermeasures to address the root cause. Generate possible solutions that can eliminate or reduce the root cause, and evaluate their feasibility, effectiveness, and costs.

Step 4: Implement countermeasures. Select the best solution and plan how to execute it. Define the roles, responsibilities, resources, timeline, and expected outcomes of the implementation.

Step 5: Check results and process. Measure and compare the results before and after the implementation, and verify if the problem has been solved or improved. Also check if the process has been followed correctly and document any deviations or issues.

Step 6: Standardize successful processes or identify unresolved issues. If the results are satisfactory, standardize the new process and ensure that it is sustained. If not, identify the remaining or new issues and repeat the A3 method.

Therefore, A3 method is a tool that can be used in a root cause corrective action process to determine the problem of a machine that is suddenly having excessive downtime.

References: 1: What is an A31 2: How to Use an A3 Report for Problem Solving 2 3: The A3 Problem Solving Method 4 4: The A3 Report – A Simple Tool for Complex Problems 5

The production plan is a statement of the resources needed to meet the aggregate demand plan over a medium-term horizon. The production plan is the output of the supply planning step in the sales and operations planning (S&OP) process. The production plan relates to a firm’s financial planning because it is used to identify future cash needs. Cash needs are the amount of money that a firm requires to operate and grow its business. Cash needs can be influenced by various factors, such as sales revenue, cost of goods sold, operating expenses, capital expenditures, inventory levels, accounts receivable, accounts payable, and taxes. The production plan can help to estimate the cash inflows and outflows associated with these factors, and to determine the optimal balance between them. The production plan can also help to identify the potential sources and uses of cash, such as borrowing, investing, or paying dividends. By identifying future cash needs, the production plan can help to improve the firm’s liquidity, profitability, and solvency.

References: CPIM Exam Content Manual Version 7.0, Domain 4: Plan and Manage Supply, Section 4.1: Develop Supply Plans, Subsection 4.1.2: Describe how to develop a production plan (page 36).

An effective single-sourcing relationship requires that the organizations must be mutually dependent. This means that both the customer and the supplier rely on each other for their success and benefit from the partnership. Mutual dependence can foster trust, collaboration, communication, innovation, and problem-solving between the parties. It can also reduce the risks of supply disruptions, quality issues, price fluctuations, and contract breaches. Mutual dependence can be achieved by aligning the goals, values, and strategies of the organizations, as well as by sharing information, resources, and risks. Demand for the customer’s products does not have to be stable for a single-sourcing relationship to work. In fact, single sourcing can help the customer cope with demand variability by ensuring a consistent supply of goods or services from the supplier. The supplier does not have to offer the lowest price per unit for a single-sourcing relationship to be effective. The customer may choose a single supplier based on other factors, such as quality, delivery, innovation, or reputation. The price per unit may not reflect the total cost of ownership, which includes other costs such as transportation, inventory, maintenance, and warranty. The organizations do not have to be located close to each other for a single-sourcing relationship to be successful. With advances in technology and logistics, distance is not a major barrier for communication and coordination between the customer and the supplier. Moreover, single sourcing can reduce the complexity of managing multiple suppliers across different locations. References := What Is Single Sourcing? (Plus Benefits and 7 Examples), Single Sourcing Vs Sole Sourcing Sourcing | CIPS, What Is Single Sourcing In Procurement And Why Is It Important?

 When procuring for innovative products, the focus should be on the total landed cost, which is the sum of all costs associated with making and delivering products to the point where they are used. This includes not only the unit cost, but also the transportation, handling, inventory, taxes, duties, and other fees associated with the procurement process. By focusing on the total landed cost, procurement can evaluate the true value of innovative products and compare them with alternative solutions. Focusing on unit cost alone may overlook the potential benefits of innovation, such as improved quality, performance, or sustainability. Lead times and lot sizes are also important factors to consider, but they are not the main focus when procuring for innovation. References : CPIM Part 2 Exam Content Manual, Domain 4: Plan and Manage Supply, Section A: Supply Management Concepts and Approaches, Subsection 2: Procurement Strategies and Techniques, Page 17.

An effective process to create meaningful change begins with identifying and discussing a past crisis, a potential crisis, or major opportunities. This step is important because it helps to create a sense of urgency and motivation for the change, as well as to clarify the vision and goals of the change1. A past crisis can be used as a learning opportunity to analyze what went wrong and how to prevent it from happening again. A potential crisis can be used as a warning signal to anticipate and prepare for the possible challenges and risks. A major opportunity can be used as a catalyst to seize the competitive advantage and create value for the organization and its stakeholders2.

The other options are not the best ways to start an effective process to create meaningful change. Reviewing financial outcomes and metrics over the last 4 quarters year-over-year may provide some insights into the performance and profitability of the organization, but it may not reveal the underlying causes or drivers of the change, or the future trends and scenarios that may affect the organization3. Refreshing corporate strategy to align with current marketplace realities for your industry may be a necessary step in the change process, but it may not be sufficient to generate buy-in and commitment from the people who are involved in or affected by the change4. Using consultants to provide in-depth analysis of current management opportunities may be a helpful way to obtain external perspectives and expertise, but it may not ensure that the change is aligned with the organization’s culture, values, and capabilities5.

References : How To Create A Sense Of Urgency For Change; How To Use Crisis As A Catalyst For Change; Why Financial Metrics Alone Won’t Drive Change; How To Align Your Strategy With Your Organization’s Culture; How To Choose The Right Consultant For Your Change Project.

 When a certified supplier’s delivery performance declines, a company should respond initially by communicating with the supplier to investigate the source of the problem. A certified supplier is a supplier that has met certain quality, delivery, and service standards and has been approved by the company to supply goods or services without inspection or testing. A certified supplier is expected to maintain a high level of performance and reliability, as well as to report any issues or deviations that may affect the delivery process. However, sometimes a certified supplier may experience a decline in delivery performance, which can cause delays, disruptions, or dissatisfaction for the company and its customers.

The best way to deal with a decline in delivery performance from a certified supplier is to communicate with the supplier and find out the root cause of the problem. Communication is essential for maintaining a good relationship with the supplier and for resolving any issues or conflicts that may arise. Communication can help the company and the supplier to understand each other’s expectations, needs, and challenges, as well as to identify and implement corrective actions or preventive measures. Communication can also help to restore trust and confidence between the parties and to prevent further deterioration of performance.

Tightening performance criteria for the supplier is not an appropriate initial response when a certified supplier’s delivery performance declines. Tightening performance criteria means imposing stricter standards or requirements on the supplier, such as reducing lead times, increasing penalties, or demanding more frequent reports. Tightening performance criteria may seem like a way of holding the supplier accountable and motivating them to improve their performance, but it can also have negative consequences. Tightening performance criteria can create more pressure and stress for the supplier, which can affect their quality, productivity, or morale. It can also damage the relationship with the supplier, as it may signal a lack of trust, respect, or cooperation from the company.

Establishing a temporary buffer of finished goods inventory at the supplier is not an effective initial response when a certified supplier’s delivery performance declines. Establishing a temporary buffer of finished goods inventory means storing extra units of products at the supplier’s location to compensate for any delays or shortages in delivery. Establishing a temporary buffer of finished goods inventory may seem like a way of ensuring availability and continuity of supply, but it can also have drawbacks. Establishing a temporary buffer of finished goods inventory can increase inventory costs, such as holding costs, transportation costs, or obsolescence costs. It can also reduce inventory visibility and control, as it may be difficult to track or manage the inventory at the supplier’s location. Moreover, establishing a temporary buffer of finished goods inventory does not address the root cause of the decline in delivery performance, but rather masks or postpones it.

Increasing the standard lead time of the component to allow for supplier delays is not a suitable initial response when a certified supplier’s delivery performance declines. Increasing the standard lead time of the component means extending the time between placing an order and receiving it from the supplier. Increasing the standard lead time of the component may seem like a way of adjusting to the decline in delivery performance and avoiding late deliveries, but it can also have disadvantages. Increasing the standard lead time of the component can reduce customer satisfaction and loyalty, as it may result in longer waiting times or missed deadlines for the customers. It can also reduce operational efficiency and flexibility, as it may limit the ability to respond to changes in demand or supply. Furthermore, increasing the standard lead time of the component does not solve the problem of the decline in delivery performance, but rather accepts or tolerates it.

References := Supplier Performance Metrics and Scorecard - IADC.org, Delivery Performance Explained (Measures, KPIs, and How to Improve), How to manage supplier performance - gatekeeperhq.com

In a make-to-order (MTO) environment, the production process is triggered by customer orders, which means there is no finished goods inventory or work-in-process inventory to consider in the sales and operations planning (S&OP) process. The available-to-promise (ATP) data is not an input to the S&OP process, but rather an output that indicates the quantity and date of products that can be promised to customers based on the current supply plan. The projected backlog of customer orders, on the other hand, is an important input to the S&OP process, as it reflects the current and future demand for the products and services offered by the organization. The projected backlog can help the organization plan its capacity, resources, materials, and delivery schedules to meet customer expectations and optimize profitability. References: CPIM Part 2 Exam Content Manual, Domain 3: Plan and Manage Demand, Section 3.1: Demand Management Concepts and Tools, p. 27-28.

Measurements are quantitative or qualitative data that indicate the magnitude, frequency, or impact of the problem. Measurements help to define the problem clearly, objectively, and specifically, as well as to establish a baseline for improvement. Therefore, what should be added to the problem statement to make it more useful is measurements that help describe the problem. For example, a more useful problem statement could be “We have observed that the inventory system causes 15% of plastic parts to be damaged or misplaced every month, resulting in $10,000 of additional costs and 5% of customer complaints.”

The information about the consistent overage in actual run time for one operation should be sent first to the engineering manager to evaluate the run time for the routing. A routing is a document that specifies the sequence of operations and work centers required to produce a product or feature. A run time is the amount of time needed to perform an operation or a task at a work center. An overage in actual run time means that the actual time spent on an operation or a task is more than the planned or standard time. This can result in lower efficiency, productivity, or quality, as well as higher costs, waste, or delays.

The engineering manager is responsible for designing and maintaining the routing and the run time for each operation or task. The engineering manager can evaluate the run time for the routing by comparing the actual and planned times, identifying the causes of the overage, and taking corrective actions. For example, the engineering manager may:

Review the accuracy and validity of the planned or standard time, and update it if necessary.

Analyze the performance and capability of the machines, equipment, or labor involved in the operation or task, and improve them if needed.

Investigate the presence of any errors, defects, rework, or variability in the operation or task, and eliminate them if possible.

Implement lean production techniques, such as value stream mapping, waste reduction, or continuous improvement, to optimize the operation or task.

The other options are not appropriate for sending the information about the consistent overage in actual run time for one operation first. The product manager is not responsible for designing or maintaining the routing or the run time for each operation or task. The product manager is responsible for managing and marketing the product or feature, such as defining its specifications, features, price, or promotion. Increasing the selling price of the product is not a solution for addressing the overage in actual run time, as it may reduce customer demand or satisfaction, as well as increase competition. The quality manager is not responsible for designing or maintaining the routing or the run time for each operation or task. The quality manager is responsible for ensuring and improving the quality of the product or feature, such as setting quality standards, implementing quality control methods, or conducting quality audits. Adding a new qualitymeasurement to the operation is not a solution for addressing the overage in actual run time, as it may increase complexity or cost without improving efficiency or productivity. The production supervisor is not responsible for designing or maintaining the routing or the run time for each operation or task. The production supervisor is responsible for overseeing and coordinating the production activities at a work center, such as scheduling operations, assigning resources, monitoring performance, or resolving issues. Reviewing and explaining the overage in actual run time is not a solution for addressing it, as it does not identify or eliminate its causes.

References := [Routing - an overview | ScienceDirect Topics], [Run Time - an overview | ScienceDirect Topics], [Engineering Manager Job Description - Betterteam], [Product Manager Job Description - Betterteam], [Quality Manager Job Description - Betterteam], [Production Supervisor Job Description - Betterteam]

ABC classification is an inventory categorization technique that divides items into three classes based on their usage value, which is the product of the number of units sold and the cost per unit. Class A items have the highest usage value and account for a large proportion of the total inventory value, but a small percentage of the number of items. Class B items have a moderate usage value and account for a moderate proportion of the total inventory value and the number of items. Class C items have the lowest usage value and account for a small proportion of the total inventory value, but a large percentage of the number of items1.

An advantage of applying ABC classification to a firm’s replenishment items is that it allows planners to focus on critical products. Replenishment items are items that are regularly ordered or produced to maintain a certain level of inventory. By using ABC classification, planners can prioritize the replenishment of class A items, which have the highest impact on the firm’s profitability and customer satisfaction. Planners can also apply different inventory management techniques and policies for each class of items, such as more frequent reviews, tighter controls, lower safety stocks, and higher service levels for class A items, and less frequent reviews, simpler controls, higher safetystocks, and lower service levels for class C items234. This way, ABC classification can help planners optimize the replenishment process and reduce costs, waste, and stockouts.

The other options are not advantages of applying ABC classification to a firm’s replenishment items, because they are either irrelevant or incorrect. ABC classification does not distinguish independent demand from dependent demand, which are two types of demand that depend on whether the item is sold to customers or used as a component in another item5. ABC classification does not provide better order quantities than the economic order quantity (EOQ), which is a formula that calculates the optimal order quantity that minimizes the total inventory costs6. ABC classification does not allow the firm to utilize time-phased order point (TPOP), which is a method that determines when to place an order based on the projected inventory position and the lead time7.

A chase operational strategy is one that adjusts production to match the demand pattern. This means that the inventory level is kept low, as the output is synchronized with the demand. This reduces the inventory cost, as there is less need for holding, ordering, and carrying inventory. A chase strategy also minimizes the risk of obsolescence, spoilage, or excess inventory.

A level operational strategy is one that maintains a constant output rate, production rate, or workforce level. This means that the inventory level fluctuates, as the output may not match the demand. This increases the inventory cost, as there is more need for holding, ordering, and carrying inventory. A level strategy also increases the risk of stockouts, overstocking, or waste.

A mixed-model operational strategy is one that produces several products with the same resources. This means that the inventory level varies, as the output depends on the product mix and the demand. This may increase or decrease the inventory cost, depending on the product characteristics, demand variability, and resource utilization. A mixed-model strategy also requires more flexibility and coordination in production planning and scheduling.

A hybrid operational strategy is one that combines elements of chase and level strategies. This means that the inventory level is balanced, as the output is partly adjusted to the demand and partly kept constant. This may increase or decrease theinventory cost, depending on the degree of adjustment and constancy. A hybrid strategy also requires more trade-offs and compromises in production decision making.

References:

APICS Exam Handbook, page 12

CPIM Part 1 Study Guide, page 19

CPIM Part 2 Study Guide, page 17

Shop backlogs are the amount of work that has been ordered but not yet completed by a production facility1. Shop backlogs remain constant when the work input, which is the rate of incoming orders, equals the work output, which is the rate of finished products2. This means that the production facility is able to match the demand and supply of its products, and maintain a steady level of backlog. This can indicate that the production facility is operating efficiently and effectively, and has a stable market position.

The other options are not correct. Forecasts are updated on the basis of the longest lead time item means that the production facility uses the item that takes the longest time to produce as a reference for planning its future production3. This may help the production facility to avoid underestimating its capacity or overcommitting its resources, but it does not guarantee that the shop backlogs will remain constant, as it depends on the actual demand and supply of its products. Capacity is assumed to be infinite means that the production facility does not consider anylimitations or constraints on its ability to produce its products. This may help the production facility to simplify its production planning and scheduling, but it does not reflect the reality of its operations, and may lead to unrealistic expectations or poor performance. Shop orders are released at a steady rate means that the production facility releases a fixed number of orders to its shop floor at regular intervals. This may help the production facility to smooth out its production flow and reduce variability, but it does not ensure that the shop backlogs will remain constant, as it depends on the actual work input and output.

References : Backlog Definition, Implications, and Real-World Examples - Investopedia; Production Planning - an overview | ScienceDirect Topics; [Production Planning: Definition & Types | Study.com]; [Production Planning: Definition & Types | Study.com]; What is a Sprint Backlog? Create With Examples [2023] • Asana.