Summer Sale Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: s2p65

Easiest Solution 2 Pass Your Certification Exams

CTS-I AVIXA Certified Technology Specialist – Installation Free Practice Exam Questions (2025 Updated)

Prepare effectively for your AVIXA CTS-I Certified Technology Specialist – Installation certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

AVIXA CTS-I Premium Access     Download Demo    
Page: 2 / 8
Total 477 questions

When evaluating a solder connection you should see:

A.

No more than two stray wires.

B.

A dull surface and a lack of shine.

C.

A thick layer of solder sealing the cable jacket

D.

No lines, cracks or pits in the joint.

When drilling is necessary, what is the purpose of pilot holes?

A.

To assess the strength of the mounting material

B.

To give the screws direction

C.

To check for electrical wiring

D.

To wear out the smaller drill bits before the larger ones

When mounting a 75 lb projector with a 15 lbs mount, the substructure should be able to support a minimum of?

A.

180 lbs

B.

90 lbs

C.

450 lbs

D.

270 lbs

H and V stand for what pieces of information in a camera?

A.

height and vertical sync

B.

horizontal and visual alignment

C.

height and visual alignment

D.

horizontal and vertical sync

When is a request for change (RFC) document used?

A.

when approval is needed to make changes in contracts, equipment, or system design

B.

any time documents, drawings, or samples, are sent to a receiving party

C.

after a change order has been approved and issued

D.

when questions first arise about an aspect of the project

What type of rack would you use for an AV event at a remote location?

A.

Stand-alone rack

B.

Open-frame (gangable) rack

C.

Portable rack with casters

D.

Portable shock-mounted rack with casters

Which of the following is an unambiguous, technical term?

A.

Quiet ground

B.

Individual branch circuit

C.

Dedicated ground

D.

Clean power

"If you drill through a cable, the cable will snap and tear off the outside of the building. Anything in its way is in danger of damage or serious injury." What sort of building construction material poses this kind of risk when mounting equipment?

A.

Post-tension construction

B.

Poured pan concrete

C.

Solid concrete

D.

I-beams

When training a customer on the operation of a touch panel interface, an example that the GUI is a good design that meets the customer's needs:

A.

The customer can easily step in and use the Touch Panel with little explanation

B.

The customer requires intensive training on the operation of the Touch panel

C.

The customer thinks the panel looks cool

D.

The customer wants only a few changes

How do you determine bolt depth?

A.

Insert a tool or screw driver into the mounting hole in the electronic device as a depth gauge.

B.

Drill a screw into the mounting hole and pull on it to see if it seems sturdy. If it doesn't move, it's safe to use.

C.

Insert different bolt types in the mounting hole until you find one that seems to turn easily in the hole.

D.

Thread a long bolt into the mounting hole and turn it until it becomes difficult to turn, and then mark the threads of a bolt.

During the handshake process, data from the EDID table is sent to:

A.

source devices

B.

sink devices

A complete audio signal path begins with acoustical energy and ends with _____ energy.

A.

electrical

B.

acoustical

C.

amplified

D.

Processed

A typical flat panel mount has two pieces: the wall bracket and the ___ bracket.

A.

Monitor

B.

Angle

C.

Panel

D.

VESA

When a camera's field of view changes with movement, _____ will adjust pixel variations so the camera can adjust its lens for fast and smooth video handling.

A.

Auto tracking

B.

Auto-shutter

C.

Auto gain

D.

Pan-tilt-zoom

How can you secure cargo on a truck?

A.

Remove the load bars from the truck once the equipment has been packed

B.

Completely fill carts to minimize time spent loading and unloading

C.

Group heavy equipment near the back tires to protect the driver

D.

Use straps to prevent the load from shifting during transit

Component video requires _____ cable(s) to carry the signal.

A.

1

B.

4

C.

3

D.

2

Which document lists out the specific materials needed for an AV installation?

A.

Presubmittal documents

B.

As Built drawings

C.

Architectural drawings

D.

Bill of Materials

____ isolates and protects a signal from sources of electromagnetic and radio frequency interference.

A.

Shielding

B.

Coaxial Cabling

C.

A transformer

D.

Noise

A spot meter is used to take ___ light measurements.

A.

projected

B.

incident

C.

task

D.

reflected

What type of video is best used to verify audio/video synchronization?

A.

Landscapes with orchestra music

B.

News anchors speaking

C.

Team sports

D.

A blip-and-flash test video

AVIXA CTS-I Premium Access     Download Demo    
Page: 2 / 8
Total 477 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved