Summer Sale Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: s2p65

Easiest Solution 2 Pass Your Certification Exams

CTS-I AVIXA Certified Technology Specialist – Installation Free Practice Exam Questions (2025 Updated)

Prepare effectively for your AVIXA CTS-I Certified Technology Specialist – Installation certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

AVIXA CTS-I Premium Access     Download Demo    
Page: 4 / 8
Total 477 questions

Which set of drawings would you reference to locate the power outlet for a video display?

A.

Structural drawings

B.

Mechanical drawings

C.

Electrical drawings

D.

System drawings

Which type of control system provides device operation by opening or closing an electrical current or voltage loop?

A.

IR control

B.

Contact closure

C.

RF control

D.

Serial control

Impedance ratings of _____ ohms are common.

A.

8, 16 and 32

B.

4, 8 and 16

C.

2, 4 and 8

D.

4, 6 and 8

In a loudspeaker circuit, what color wire carries the negative (-) current?

A.

Red

B.

White

C.

Black

D.

Grey

A 1080p HDTV signal with a frame rate of 30Hz will reproduce images at:

A.

30 lines interlaced

B.

30 frames per minute

C.

30 lines per scan

D.

30 frames per second

A _____ is a long flexible tape used to pull cable through conduit.

A.

Snout

B.

Tape measure

C.

Mouse

D.

Fish tape

Which are best practice methods for dressing a rack? (Choose all that apply.)

A.

Bundle cables by signal type.

B.

Use removable cable ties to secure a cable bundle.

C.

Secure heavy cable bundles to lacing bars.

D.

Keep power cables separate from signal cables.

What is the function of a back box?

A.

It keeps sound contained into a single room

B.

It transmits sound to adjoining areas through the ceiling space

C.

It limits the low frequency response of the loudspeaker

D.

It helps hold the wires stable as you crimp butt splices onto them

What unit is used to express decibel changes in voltage in professional audio equipment?

A.

dB SPL

B.

dBu

C.

dBV

D.

dBm

When preparing to install a ceiling mount, what should you determine before you can determine the projector position?

A.

The center of the projector

B.

The location of the projection surface

C.

The center of the projector's mount

D.

The center of the adjustable ceiling support structure

Rack blanks serve two functions: aesthetics and _____.

A.

air flow control

B.

reinforcement of the structural integrity of the rack

C.

weight distribution

D.

supporting equipment that is not long enough to reach the rear rack rails

What are the benefits of using the ANSI/AVIXA 10:2013 Standard for Audiovisual Systems Performance Verification? (Choose all that apply.)

A.

Reducing project risk

B.

Aligning outcome and performance expectations

C.

Providing a verifiable outcome

D.

Creating reporting that completes the project documentation

Determine the wattage in a circuit measuring 120 volts with 15 amperes of current flow.

A.

80W

B.

0.125W

C.

1800W

D.

8W

When working with fiber-optic cable, what is a major concern?

A.

It takes too much time.

B.

It bends easily.

C.

Improper handling can lead to injury.

D.

It is highly susceptible to loss of signal quality over distance.

What type of drill bit should you use when drilling a pilot hole into plastic?

A.

Self-taping screws

B.

A sheet metal bit

C.

A masonry drill bit

D.

A high-speed metal drill bit designed for wood

A ______ is a "seamless switcher" that synchronizes video transitions when in vertical retrace to ensure that transitions between sources are clean.

A.

Crash Switcher

B.

Vertical Interval Switcher

C.

Matrix routing switcher

D.

Distribution Amplifier

Why is proper weight distribution in a rack important?

A.

so the AV technicians do not strain themselves installing gear

B.

so the rack does not tip over

C.

so the left and right sides of the rack are an equal weight

D.

so the rack does not exceed 500 lbs. (227kg)

What is the primary reason an AV installer should attend weekly construction meetings?

A.

Learn about safety requirements

B.

Establish relationships with allied trade teams

C.

Identify changes that will affect the AV installation

D.

Find out when the cafeteria is open

What must be considered during rack assembly?

A.

Ergonomics of equipment placement, signal separation, heat load, weight distribution

B.

Availability of technical assistance, the electrical wiring layout, other schematics

C.

Strength of the signal, conduit accessibility, weight of the rack, ventilation at site

D.

Transportation availability for materials, mobility of equipment, proper storage and alignment

Noise caused by circuit interference can be reduced by:

A.

using balanced shielded twisted-pair cable

B.

muting the microphone

C.

distancing the microphone from the loudspeaker

D.

extending the cable run to another room

AVIXA CTS-I Premium Access     Download Demo    
Page: 4 / 8
Total 477 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved