RCDD-002 BICSI Registered Communications Distribution Designer - RCDD Free Practice Exam Questions (2025 Updated)
Prepare effectively for your BICSI RCDD-002 BICSI Registered Communications Distribution Designer - RCDD certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.
You are designing a nurse call system for an assisted care facility. What type of nurse call system would best suit the needs for the facility?
Which of the following is an alarm management output system?
You are renovating telecommunication rooms that support an acute care facility that has 10,000 sq ft floors. The facility will be adding 15,000 sq ft to each of the floors. What is the MINIMUM additional floor space that you will need to expand the TRs to support the new floor space?
The ________ system is an application used for storing and viewing captured digital radiology image files.
Which of the following is used to create an electronic signal that can be sent to the central nurse call equipment?
You have been selected to recommend a solution to increase response time and add fault tolerance to a bank of servers. Your budget is limited and the client needs a solution as soon as possible (ASAP). Which of the following options should be considered with the short time frame and limited budget?
You are placing PTP fiber between two locations 55 km (34 miles) apart. You are told that DWDM equipment will be installed within the next 5 years. Which of the following optical fiber types should you use?
Which layer of the OSI model covers physical cable connections?
A 24 port layer 2 switch can perform all of the following functions EXCEPT:
The ITU-T G.711 standard deals with what aspect of video conferencing?
All of the following are used to control static discharge EXCEPT:
Multiples of the basic frequency of an electrical waveform are called:
If you have a circuit with 120 volts, 12 amps, and 10 ohms, it has a peak power of ________ watts.
DC loads are generally expressed in:
The formula for calculating BTUs from electrical power is:
You are designing a 4.9 GHz microwave system that is using rectangular waveguide from the transceiver to the inside wall of the shelter and an antenna that is to be placed 200 ft up on a 250 ft tower. What type of medium will be best suited to connect the antenna to the transceiver?
You are designing a DAS system that has a requirement to supply both RF signal and power to the remote transceivers in the system. Which cable will provide the needed services for this application?
Which of the following is NOT a primary type of DAS antenna?
In order to maximize its ability to send and receive, an antenna should be ________ to the desired frequency.
What is at the "root" of a DAS (distributive antenna system)?
