L4M8 CIPS Procurement and Supply in Practice Free Practice Exam Questions (2026 Updated)

ILO stands for International Labour Organization- It is a United Nations agency whose mandate is to advance justice and promote decent work by setting international labor standard.

ETI is Ethical Trading Initiative: It is a leading alliance of companies, trade unions and NGOs that promote respect for workers right around the globe. Its vision is a world where all workers are free from exploitation and discrimination and enjoys condition of freedom, security and equity.

Refer to the question column for response

A contract is written or verbal agreement, made between two or more parties that are legally en-forceable. For a contract to be legally binding it must include intention of parties entering into the contracts. All parties must have the capacity to contract or be contracted. They must be of a sound mind, there should be a promise (offer) for performance from the other party and an exchange (consideration) of one thing for another within an agreement for contract to be binding, there must be an acceptance of the offeror’s offer by the offeree.

There are many reasons contract can legally be terminated, including non-performance by one or both parties, a significant change in the requirement.

There are several reasons contract can legally be terminated, including non-performance by one or both parties; breach of material, failure to meet service level agreement, ethical breaches, a significant change in the requirement of either party caused by ethical change in the market, change in Demand, obsolescence, contract completion. The procurement professionals should get an exit strategy that should encourage a stress free disengagement should incase there are no profitable reason to continue with the contract.

•

Refer to the question column for response

The reputation of all the organizations within a supply chain is linked. A Company’s reputation is an intangible asset that can contribute to the failure of an organization if damaged. Factors that could damage organizational reputation within the supply chain are;

1. Quality: if the product or service quality is poor the organization may not satisfy it customers and this can lead to a loss of reputation in the market. For example, a residential building construction company contracting a supplier that would do a bad job which in three months may require home owners to reinstall new doors.

2. Sustainability: if the organization is not replenishing that which it is extracting, it will some day run out of business or probably loss loyal customers. For example a drilling company that spills hydrocarbon as it drills.

3. Fit for purpose: if an organization produce a product or carry out services that are not fit for purpose, it may run at loss for there will be so much rejection and rework. This can lead to customers switching to another organization which product or services are fit for their purpose.

4. Contract management: an organization will have to manage its suppliers and the contracts to ensure they are delivering what they were contracted to do. A poor contract management is a waste in the process of delivery that can lead to reputational loss.

•

Refer to the question column for response

A sector is an area of an industry, e.g., private, public or third sector.

A public sector is a sector of the economy that is owned, finance and run by the government. This sector is financed with tax payer’s money. And therefore owe the general public an ethical explanation towards all investment and decision.

Once the supplier that is awarded the contract has accepted, the buyer can tell the unsuccessful bidders. This usually happens through email or letter. The public sector is more likely to give feedback to unsuccessful bidders and also have to respond to any stakeholders that request information on why a supplier is not successful.

A new buy is the purchase of goods and services by an organization or an individual for its first time. For example a transport organization for the very first time contracting the purchase of a Lorry out to an external supplier. In situations like this, it is advisable to start the procurement cycle from the very first stage. Which is understanding the need and developing high level specification.

Modified re-buy is the purchase of goods or services that an organization has bought before there was a need but with changes to the specification or supplier or quantity or quality. In carrying out modified re-buy, procurement professional should start from the very first stage of the procurement cycle to justify the added need and follow through. Not in all cases that buyer would have to start from understanding the need. In a situation where the changes required is a change of supplier, the organization will start from its preferred suppliers list and contract the next ranking supplier as the case may be.

Stakeholder are individuals or organizations that can be affected directly or indirectly by any project or decision. For successful procurement activities to take place, stakeholders must be identified, engaged and managed. Not all stakeholders require the same level of engagement and management. To appropriately manage identified stakeholders, the Mendelow management matrix has categorized stakeholders in four quadrants, according to how low or high their power and interest in the project could be. The four categories are:

1) Minimum effort (low power-Low interest)

2) Keep satisfied (high power-Low interest)

3) Keep informed (Low power – high interest)

4) Manage closely (High power- High interest)

•

Refer to the question column for response

Trying to measure how sustainable an organization was used to be challenging undertaking. How-ever, during the 1990s, a concept brought up by American John Elkington change the way sustainability was measured. This framework is known as the triple bottom line (TBL) and measures sustainability in relation to organizational performance and investment against the 3Ps (1) Profits (2) People (3) Planet. For example;

Profit: A packaging manufacturer reinventing its profits in a State- of-the-art recycling machinery for it wasted cardboard.

People: A large privately owned call center donate its end of life computers to a local youth clubs and social groups to help gain internet cases.

Planet: A driving instructors using only hybrid vehicles to teach her learners, thus to reducing Co2 emission.

The TBL, although a useful tool, is simply a way of recording how sustainable an organization is. Alone, it does not contribute towards any improvements or generate any actions promoting a more favorable, sustainable outlook. Objectives should be set in relation to what the 3Ps show and then monitored by implementing KPIs or other measuring methods.

•

Refer to the question column for response

A weighted score card is a tool with a systematic and a fair process for selecting supplier, based on predetermined criteria. This tool can help make the decision by presenting a fair display of how all suppliers did in the process. The values of these weights are based on their importance. The supplier with the highest score card is considered the most suitable to be awarded the contract.

In the table above, cost is considered more than all other criteria. Contract length is the lowest which is weighted 2

Base on the weighted score card as presented above, company B scored 78 while company A and company C scored 65 and 63 respectively.

Company A, having scored the highest (78) should be awarded the contract.

•

Refer to the question column for response

Pre-qualification questionnaire (PQQ) is often standard forms that buyers send to potential suppli-ers. The purpose is to ensure that these potential suppliers could, if they win the contract, supply the product or service to the standard required. PQQ includes requesting details from the potential suppliers on the following information

1. Company Details

2. Environment policies

3. Trading history

4. Ethical policies

5. Financial information

6. Health and safety policies

7. Quality standards

8. References

9. Insurance.

RESPONSE

After a need in an organization has been identified/understood, defined, justified and authorized, the next stages are to understand how commodity prices are reacting, which suppliers are available and their strength. The make or buy decision can be reached with knowledge from this; the procurement professional can consider the organization external environment, strength, weakness opportunity and threat to develop strategy/plan of how to achieve the procurement.

‘STEEPLE’ is an effective way to evaluate the external environment. It helps buyers to assess factors that could affect the need in hand and helps them to develop the plan accordingly. ‘STEEPLE’ is an acronym which stands for,

Social, Technology, Economic, Environment, Political, Legal, Ethical

‘SWOT’ helps the organization to analyze its strength and within the organization and the oppor-tunity and threats outside the organization.

‘SWOT’ is an acronym which stands for, strength, weakness, opportunity and threats.

•

Refer to the question column

Contract terms are the right and duties agreed between parties with which are then documented in contract. Terms can be either implied or expression.

Implied terms are always present in a contract and are set by national laws; like the sales of goods act, whereas express terms are negotiated and created, for example; time is of the essence. When the procurement professional is setting key performance indicators, where which the supplier’s performance will be monitored and managed, the KPI is expected to be SMART. The SMART is an acronym that is used to set KPI and specification. It means:

Specific

Measurable

Achievable

Relevant

Time bound

Damages are ‘sum of money that the supplier pays if it fails to carry out its contractual obligation. Damages are categorized into two types; liquidated and un-liquidated.

Liquidate Damages are fixed amount of money agreed between the parties that is payable if a contract is breached. For example, knowing that supplier not being able to install a device properly in a power transformer may destroy the device and going ahead to include a fee in the contract if the device was destroyed.

Un-liquidated damages are unfixed amount of money. It is used when the amount of money that will compensate the injured party cannot be known in advance. A court decides the amount when the damages occur. For example, knowing that supplier not being able to install a device properly in a power transformer may destroy the device, other appliances and equipment unknown, cause the buyer delay in the process and reputational damage as in customer dissatisfaction. Yet, unquantifiable as both party are unable to fix a fee in advance on the damages and leaving it to the court to decide the damage if it may occur.

4. Examine FIVE methods OrganiBake could use to monitor suppliers’ performance against Environmental, Social and Governance (ESG) principles. (25 marks)

OrganiBake currently relies on a basic supplier self-assessment questionnaire, but this is no longer enough as the business grows and faces greater ESG risks. To protect its brand reputation and manage risks such as water use, pesticide runoff and unfair labour practices, OrganiBake needs stronger and more proactive supplier monitoring methods. CIPS defines supplier performance management as assessing supplier activities against agreed KPIs and managing supplier performance, while ISO 20400 provides guidance on integrating sustainability into procurement. ( cips.org )

1. Supplier audits and site visits

One effective method is to carry out regular supplier audits and on-site inspections . These can be announced or unannounced and allow OrganiBake to check whether suppliers are actually following ESG requirements in practice, rather than simply claiming compliance on paper. For grain suppliers, audits could review water management, chemical handling and environmental controls. For packaging suppliers, audits could examine working conditions, pay practices, health and safety, and management controls. This method is stronger than a questionnaire because it provides direct evidence and helps verify whether policies are being implemented properly. OECD due diligence guidance highlights supplier assessments and monitoring mechanisms as part of responsible supply chain management. ( OECD )

2. ESG KPIs and supplier scorecards

A second method is to introduce measurable ESG key performance indicators (KPIs) and use supplier scorecards. OrganiBake could track indicators such as water consumption, pesticide incidents, waste levels, carbon emissions, employee turnover, accident rates, wage compliance, audit closure rates and ethics breaches. These KPIs should be reported regularly and reviewed in supplier performance meetings. This gives OrganiBake a structured way to compare suppliers, identify weak performance early and measure improvement over time. It is particularly useful because the business is scaling up and needs transparent, consistent communication with suppliers. CIPS recognises supplier performance monitoring against agreed KPIs, and ISO 20400 supports the use of criteria and performance measures in sustainable procurement. ( cips.org )

3. Contractual ESG requirements with regular reporting

A third method is to include clear ESG clauses in contracts and require periodic evidence-based reporting from suppliers. For example, OrganiBake could require suppliers to comply with a supplier code of conduct, labour standards, anti-corruption expectations, environmental controls and corrective action obligations. Suppliers could then be required to submit supporting data, certificates, payroll evidence, water-use records or environmental reports at agreed intervals. This strengthens monitoring because ESG performance becomes a contractual obligation rather than a voluntary statement. It also gives OrganiBake leverage if a supplier fails to meet expected standards. OECD guidance emphasises corrective action plans and due diligence measures, while practice examples under the UN Global Compact show ESG requirements being embedded into sourcing and reporting processes. ( OECD )

4. Third-party verification and external assurance

A fourth method is to use independent third-party verification . This could involve external auditors, certification bodies or recognised ESG rating platforms to assess supplier performance more objectively. This is valuable because self-reported information can sometimes be incomplete or biased. Independent review can improve credibility, especially where OrganiBake faces scrutiny from environmental groups and reputational risk from consumers. External assurance is particularly useful for high-risk areas such as environmental claims, labour standards and governance controls. Examples reported through the UN Global Compact show selected sustainability KPIs being externally assured, demonstrating how third-party validation can strengthen confidence in reported ESG performance. ( cop.unglobalcompact.org )

5. Grievance mechanisms, stakeholder feedback and ongoing risk monitoring

A fifth method is to establish grievance channels and continuous risk monitoring . This means OrganiBake should not depend only on supplier-submitted data; it should also collect information from workers, local communities, NGOs, industry alerts and media screening. For example, if there are allegations of low wages or pesticide runoff, the company should have a process for receiving complaints, investigating them and requiring corrective action. This method is useful because some ESG problems, especially labour abuse or environmental harm, may not be visible in formal reports. OECD due diligence materials identify grievance mechanisms, stakeholder engagement and early-warning systems as important elements of supply chain monitoring and evaluation. ( OECD )

Conclusion

In conclusion, OrganiBake should move beyond basic self-assessment questionnaires and adopt a broader ESG monitoring system. The five main methods are supplier audits and site visits, ESG KPIs and scorecards, contractual ESG reporting requirements, third-party verification, and grievance plus ongoing risk monitoring . Together, these methods would give OrganiBake more reliable information, help manage reputational and supply chain risks, and support the company’s commitment to ethical and sustainable growth. ( cips.org )

When the procurement professional is setting key performance indicator (KPI) where which the supplier performance will be monitored and managed. The KPI is expected to be SMART. SMART is an acronym that is used to set KPI and specification.

S - specific ,

M - measurable,

A - achievable,

R - relevant, and

T - timebound.

When a fixed asset reaches the end of its life, it requires decommissioning before reconditioning or disposal.

Decommissioning is to observe all the safety measures and technical procedures and stop active machinery or an asset from operation (example gas plan, generator, transformer etc.

Decommissioning process include the following aspect

1) Preparation: Plan the process

2) Dismantle: Take the asset apart and remove hazardous waste

3) Processing: make safe any hazardous waste

4) Disposal: Ensure paper work is received to confirm removal and disposal

An offer is created when one party communicates to another or to multiple parties that they wish to enter into a legal binding agreement in accordance with the terms stated, for example; a company in promotion advertising for buyers to buy one and get one free, an offer is a buying organization communicating to a supplier to supply X number of goods and be paid x amount upon delivery at company premises, an offer is when a football club proposes to pay X amount to a player if agrees to play for them for a month. An offer can be legally banded if accepted, whereas invitation to treat does not. An invitation to treat is just an invitation from one party to another to begin negotiations with the intention of creating an offer. If an offer is made without stating terms, this becomes an invitation to treat, for example, an invitation to treat is when a pharmacy displays a drug in its shelf. An invitation to treat can be linked to a request a buyer send to suppliers asking them for specific information.

When evaluating potential suppliers, procurement professionals can carry out bench-marking. Benchmarking is the process of comparing a function, a process performance with another which is best in-class.

Other factors, apart from price that can be considered to find the total cost of acquisi-tion include the product or service quality, lead time, supplier culture, its environmental awareness and sustainability.

Hidden costs are costs that do not always present themselves at the onset of the project.

Logistics can provide a hidden cost within global sourcing. The movement of goods can generate risk within a localized supply chain, but the risk is greater within global sourcing. Within global sourcing there are usually many more aspects to the logistics operation, hidden cost associated with the logistics process includes,;1) delays that can be experienced after placing orders, 2) unclear and poor/incorrect communication that might affect the successes of the transaction, also 3) goods could be confiscated by customs for unseen reasons.

•

Refer to the question column for response