CWDP-304 CWNP Certified Wireless Design Professional Free Practice Exam Questions (2025 Updated)
Prepare effectively for your CWNP CWDP-304 Certified Wireless Design Professional certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.
What functions may be performed by a WIPS?(Choose all that apply.)
What is the primary reason for avoiding 160 MHz channels with 802 11 in the 5 GHz band'?
What is a valid 40 MHz channel configuration in the 2.4 GHz ISM band where channels 1-11 are permitted?
As a device starts to shift to lower PHY rates, what factors usually influence a device decision to shift to lower PHY rates?(Choose all that apply.)
In a manufacturing facility with highly reflective materials, you are planning an upgrade to your existing 802.11b WLAN implementation. You have
chosen a dual- band 802.11n infrastructure product for this purpose. Your client applications include:
✑ Handheld scanners for inventory management
✑ Toughbooks (laptops) mounted on forklifts for inventory and workflow management
✑ VoWiFi phones used by select employees throughout the facility
You are evaluating all of the 802.11n enhancements and determining which features to enable for your environment and applications.
In this scenario, what 802.11n enhancement typically should NOT be enabled on the 2.4 GHz radio of the new APs?
What roaming technology uses stored keys at the APs for roam back if a client STA returns after having roamed away?
Response:
When using a predictive design tool, you have selected APs with an antenna gain 3 dBi and set the transmit power of the predicted APs to 25 mW. What should be EIRP of the APs in the design?
Response:
How much more power can a 1 Mbps 802.11b signal have than a 54 Mbps 802.11g signal if it is sent through a saturated amplifier?
Response:
Why does a frame transmitted at 1 Mbps have a greater usable range than the same frame transmitted at 54 Mbps?
What is the purpose of DHCP Option 43, and how is it used with WLANs?
When live video streaming solutions that transmit simultaneously to more than one recipient are used, what special capability should be
considered and configured in all affected WLAN implementations?
When you see the SKINNY protocol in a post-install validation protocol capture, what does this indicate?
When designing a new WLAN infrastructure you also need to be aware of now the network is physically deployed and now the network is logically configured What are two documents that are helpful In this case?
You are using site software design features. You have imported a floor plan, but the simulated RF coverage is nowhere close to the real RF coverage you see with a walkabout.
Given that the simulation is significantly different, when step was likely missed when using the software?
Response:
Which of the following items could be considered constraints when performing a network design?(Choose all that apply.)
What is the most cost-effective way to accurately measure the height of a ceiling when ladder use is not allowed?
What is the most suitable antenna option to be used when designing a WLAN infrastructure with APs mounted on a ceiling with a height of more than 20 feet and having all of the client stations used from the floor?
Response:
When selecting a centralized WLAN architecture, what new problem may arise when you change the data forwarding model from centralized to
distributed?
As a device starts to shift to lower PHY rates, what factors usually influence a device decision to shift to lower PHY rates?(Choose all that apply.)
Response:
Which DHCP option, when required, should be configured and enabled to help APs locate their wireless LAN controller?
