Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

CWT-100 CWNP Certified Wireless Technician Free Practice Exam Questions (2025 Updated)

Prepare effectively for your CWNP CWT-100 Certified Wireless Technician certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Page: 1 / 1
Total 60 questions

What antenna would be best for a long distance (more than 5 kilometers) bridge link?

Select one:

A.

Panel

B.

Parabolic dish

C.

Patch

D.

Omnidirectional

What can occur when two copies of a signal wave arrive at the receiver at the same time, but 180 degrees out

of phase which each other?

A.

Increased signal amplitude

B.

Bits may be added to the total count

C.

Increased signal strength

D.

Signal nulling or cancellation

When configuring a standalone AP with a web-based interface, what should be changed to protect the HTTP

interface used to manage the AP?

A.

Admin account password

B.

WPA2 passphrase

C.

SSID

D.

WPA passphrase

A user reports that his laptop was rebooted this morning and now he cannot connect to the WLAN. No other users are reporting connection problems in his work areA. No network configuration changes have been made.

Which one of the following is the most likely issue?

A.

The driver was updated and the new version is problematic

B.

The network SSID has changed

C.

Wrong passphrase entered for WPA2 on his laptop

D.

The AP is not allowing his laptop onto the network because it was rebooted and the reboot changed the MAC address

What is the maximum channel width supported by 802.11ac (VHT) in the standard?

A.

40 MHz

B.

80 MHz

C.

160 MHz

D.

20 MHz

An AP specifies that it requires 802.3af Power over Ethernet (PoE). What is the maximum power this AP could

draw?

Select one:

A.

25.5 W

B.

30 W

C.

15.4 W

D.

12.95 W

What EAP method is supported on most operating systems without additional installation requirements?

A.

EAP-GTC

B.

EAP-FAST

C.

EAP-TLS

D.

LEAP

What device type is configured to respond when a probe request is received in a BSS?

A.

Desktop

B.

Switch

C.

Laptop

D.

AP

Some APs come with a captive portal available within the AP, controller or cloud interface. For what would this

captive portal most likely be used?

A.

Guest access

B.

Employee access

C.

Executive management access

D.

Long-term contractor access

What kind of authentication is used by WPA2-Enterprise implementations?

Select one:

A.

WEP

B.

Preshared key

C.

802.1X/EAP

D.

Passphrase

What is the maximum channel width recommended in the 2.4 GHz frequency band for 802.11n devices?

A.

80 MHz

B.

20 MHz

C.

40 MHz

D.

10 MHz

What is used as a mid-span Power over Ethernet (PoE) power source equipment (PSE) device?

Select one:

A.

Switch

B.

Router

C.

Controller

D.

PoE injector

How many channels are available in the 2.4 GHz frequency band in all regulatory domains?

Select one:

A.

3

B.

14

C.

13

D.

11

When clients are using unacceptably low data rates for WLAN transmissions, what metric is too low?

A.

SNR

B.

Interference strength

C.

Noise floor strength

D.

MTU size

An AP has two Ethernet ports on the back and another port that looks similar to an Ethernet port. For most

enterprise APs, how many of these ports can be used for Power over Ethernet (PoE)?

A.

1

B.

3

C.

0

D.

2

EAP-TLS is used for 802.1X/EAP authentication on your WLAN. What must be installed on all client devices

that connect using this method?

A.

RADIUS shared secret

B.

RADIUS IP address

C.

Certificate

D.

EAP-TLS DLL

You configured an AP for 802.1X/EAP authentication. You also configured several clients for the same. The clients cannot authenticate to the WLAN. When you look at the RADIUS server logs, you see that no

authentication attempts have been made. Other services use the same RADIUS server without problems. At what location should you check the configuration for errors?

A.

Clients

B.

AP

C.

None of these

D.

RADIUS Server

Which one of the following is a non-deprecated security solution in the 802.11 standard?

A.

WEP

B.

CCMP/AES

C.

TKIP/RC4

D.

Shared Key Authentication

Page: 1 / 1
Total 60 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved