Month End Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

500-601 Cisco Application Centric Infrastructure Support Representative Free Practice Exam Questions (2025 Updated)

Prepare effectively for your Cisco 500-601 Application Centric Infrastructure Support Representative certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Page: 1 / 1
Total 50 questions

Which three statements about fitter and contract are true? (Choose three.)

A.

A contract can be consumed and provided by as many EPGs as are needed by the network design.

B.

A fitter can be used by multiple contracts.

C.

A fitter contains groups of IP subnet

D.

A contract can be consumed by a single EPG

E.

A contract can be provided by a single EPG

F.

A filter contains EtherType, IP protocol, TCP flags, and Layer 4 ports.

Which two statements about tenant bridge domain Layer 2 unknown unicast forwarding modes are true'? (Choose two.)

A.

If forwarding mode is flood, unknown Layer 2 unicast is sent to all Layer 2 ports in the bridge domain.

B.

If forwarding mode is proxy, unknown Layer 2 unicast packets are sent to border leaf proxy for forwarding.

C.

By default, multicast traffic is always flooded within the bridge domain VLAN.

D.

Layer 2 unknown unicast can be set to flood or proxy, the default is flood.

E.

If border leaf proxy cannot resolve the destination, packet is flooded.

Which three states are distributed to each node in the fabric? (Choose three)

A.

fabric node vector

B.

iVXLAN vector

C.

appliance vector

D.

replica vector

E.

diameter ID

F.

cluster vector

Which two actions occur when an EPG is being validated on a switch? (Choose two.)

A.

IDs assignment validation

B.

VLAN validation

C.

path validation

D.

BD, CTX configured validation

Which statement about the default MAC address for the distributed gateway in the Cisco ACI Fabric is true?

A.

There is no default MAC address.

B.

A custom MAC address must be configured under each bridge domain.

C.

The default MAC address is 00 11;BD:F9:88:0C.

D.

The default MAC address is 00:22:BD:F8:19:FF.

Where does the VIP for the vPC come from?

A.

assigned by Cisco ARC from the management tenant IP space.

B.

allocated from the vPC domain number assigned to the vPC peers.

C.

DHCP from the infra TEP pool leaf portion.

D.

DHCP from the infra TEP pool VIP portion.

Refer to the exhibit

Which option is a potential reason why you would see this output while provisioning a DVS?

A.

The specified data center does not exist on the vCenter m question.

B.

The Cisco APIC(s) cannot reach the vCenter host/vm.

C.

The Service Content process has crashed.

D.

Cisco Discovery Protocol is disabled on the vswitch policy tied to the corresponding AAEP.

A user must upgrade their Cisco ACI Fabric In which order should they upgrade?

A.

It will always be the switches first and the APICs second.

B.

It will always be the APICs first and the switches second.

C.

It will always depend on the specifics of the software release.

D.

It does not matter which you upgrade first(ARC/Switch) or second (APIC/Switch)

A VMM endpoint off of a UCSB is unable to hit its anycast gateway, but the MAC address of the VM can be seen in one of the fabric interconnects Wh1Ch option is the cause of the issue?

A.

The active NIC on the host has gone down and the host has not yet failed over.

B.

There is no native VLAN configured within the data path ofthe Cisco UCS.

C.

LLDP is not enabled in the vSwitch policies.

D.

The VLAN tag is being changed at the vNIC or uplink port.

At which point during VMM integration do you need to create the vDS switch within vCenter?

A.

when starting up the VM

B.

No need to create the vDS,the Cisco APIC controller does that automatically.

C.

after assigning the EPG to the VMM controller

D.

before defining the VLAN pool that is assigned to the VMM controller

Which option describes the correct sequence to discover an ESX server in the fabric without a blade switch or multiple Layer 2 hops?

A.

The leaf sends LLDP/CDP to the ESX, the ESX sends parsed UDP/CDP information to the vCenter, the AP1C receives LLDP/CDP information from the vCenter, and the APIC downloads the policy for VMs behind the ESX to the leaf node.

B.

The APIC downloads the policy for VMs behind ESX to the leaf node, the leaf sends LLDP/CCP to the ESX, the ESX sends parsed LLDP/CDP information to the vCenter, and the APIC receives LLDP/CDP information from the vCenter.

C.

The ESX sends parsed LLDP/CDP information to the vCenter, the leaf sends LLDP/CCP to the ESX, the APIC downloads the policy for VMs behind the ESX to the leaf node, and the APIC receives LLDP/CDP information from the vCenter.

D.

The ARC receives LLDP/CDP information from the vCenter, the APIC downloads policy for VMs behind ESX to the leaf node, the leaf sends LLDP/CCP to the ESX, and the ESX sends parsed LLDP/CDP information to the vCenter.

What does the acronym OBFL stand for?

A.

Onboard Failure Logging

B.

Out of band Failure Logic

C.

Onboard Forwarding Logic

D.

Oversubscription Forwarding Level

Which option describes the ASICs that comprise the 2 RU spine chassis PID Cisco Nexus 9336PQ?

A.

three Broadcom and one Alpine

B.

two Broadcom and two Alpine

C.

two Broadcom and one Alpine

D.

one Broadcom and two Alpine

Which MO name represents a physical domain?

A.

RtDomP

B.

PhysDomP

C.

physDomP

D.

InfraRtDomP

Which two statements are true regarding ARP request/response on an ACI Fabric? (Choose two.)

A.

ARP requests come in on the elected/designated FD encapsulation VLAN under the BD.

B.

ARP request can be captured using icpdump" on spine switches.

C.

ARP traffic is handled by thebroadcom ASIC it the two endpoints are in the same EPG and the same FD VLAN.

D.

ARP requests are sent to CPU only if they are for the Bridge Domain SVI IP address

E.

ELAM can be used to capture ARP request/response frames in the Leaf front panel Broadcom ASIC.

Page: 1 / 1
Total 50 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved