648-238 Cisco Implementing Cisco Connected Physical Security 1 Free Practice Exam Questions (2025 Updated)
Prepare effectively for your Cisco 648-238 Implementing Cisco Connected Physical Security 1 certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.
Refer to the exhibit.
An operator is trying to set a lower video stream quality for a newly installed camera in the system. However, the video quality slider is grayed out and is not available. What is causing this issue?
A new VSMS server has been added to VSOM, but the storage capacity says "No Repositories." What should you do in order to resolve this?
You are working with a customer, CSI Industries, to deploy Cisco Video Surveillance at a new branch office. As part of CSI's centralized surveillance network design, IP cameras will stream across the WAN and be recorded by Cisco VSMS at CSI's main data center. IP surveillance cameras will be placed on their own subnet to separate them from other voice and data traffic. CSI's network administrator has allocated this subnet for IP cameras: 172.16.0.0 (subnet mask: 255.255.254.0). What is the maximum number of IP cameras that can be placed on this subnet?
In the Cisco VSM 7.0.x solution, which three functions is Cisco VSOM used for? (Choose three.)
Refer to the exhibit.
Which three Advanced Event configurations based on the template are valid? (Choose three.)
In the Cisco Video Surveillance solution, which archive clip format allows for the downloading and playing back of multiple camera feeds simultaneously?
Where do you install a new, third-party IP camera driver?
Cisco UCS B-Series chassis is populated with five half-width B200 compute blades. Each blade is configured with dual 6-core, 3 Ghz Intel Xeon processors and 96 GB of RAM. Assume 2 Mb video stream per camera and that no additional applications are running on this system. Which two configurations are valid and supported by this chassis? (Choose two.)
How should video storage requirements be calculated?
Which option must be considered when calculating storage and retention on a Cisco Physical Security MSP server?
You have been called to troubleshoot a network connectivity issue with a new Cisco VSM deployment. You are unable to ping the network gateway from the MSP server. Using the ifconfig command, you notice there are multiple network interfaces configured on the operating system. Which one of these network interfaces does the MSP server use in order to connect to the network gateway?
What is the approximate usable drive capacity for a CPS-MSP-2RU-K9 with half of the drive bays populated with 2 TB HDDs?
Refer to the exhibit.
You just deployed a virtual, co-located Cisco VSM 7 OVA image and added a 1 TB virtual disk for media storage. You are trying to add a media server via Cisco VSOM and get the error message shown. What is causing this issue?
When the CPS-MSP-2RU-K9 server is turned on, it starts beeping and continues to do so, even if the server seems to be operational. What is causing this issue?
When an installation of VSM is complete, what is the Cisco recommendation and best practice for the final step that should be taken?
Which statement best describes the physical and virtualized Cisco VSM 7 platforms that Cisco recommends?
Which four Cisco IP camera families natively support medianet? (Choose four.)
What is the advantage of using multicast instead of unicast to transport the camera video stream in the Cisco Video Surveillance solution?
Refer to the exhibit.
You have installed a Cisco 4500E IP camera to monitor the area of interest near the center of an outdoor courtyard area 24 hours a day. Which three actions help to focus in on the area of interest and improve overall image quality? (Choose three.)
Which Cisco Video Surveillance IP cameras can be configured as an indoor, vandal-resistant camera, without the use of a third-party external enclosure?
