1Y0-205 Citrix Virtual Apps and Desktops 7 Administration (CCA-V) Free Practice Exam Questions (2026 Updated)

When using an HDX Session printers policy, print jobs sent to a printer managed by the print server are routed directly to the network print server and then to the specified printer3.

The redirectURL parameter of the set cs vserver command specifies the URL where the user requests are redirected if the status of the content switching virtual server is DOWN1. This parameter is used for configuring backup servers or displaying maintenance messages1.

According to the Citrix Virtual Apps and Desktops 7 Deployment and Administration course, Citrix Provisioning can reduce the total number of writes on the storage by using a single shared image that is streamed to multiple target devices. This eliminates the need to store multiple copies of the same image on the storage. The course also states that Citrix Provisioning can reduce the storage requirements by up to 90% compared to traditional methods1

1: CWS-215: Citrix Virtual Apps and Desktops 7 Deployment and Administration, Module 9: Implementing Citrix Provisioning, Lesson: Introduction to Citrix Provisioning, Slide 6.

According to the Citrix Virtual Apps and Desktops 7 Deployment and Administration documentation1, the collation sequence for the site database should be _100_CI_AS_KS. This collation sequence is case-insensitive, accent-sensitive, kana-sensitive, and width-insensitive. It is also compatible with the SQL Server mirroring feature. Other collation sequences might cause errors or unexpected behavior when using SQL Server mirroring2.

 To enable Azure AD authentication for the Workspace Experience, the administrator needs to enable Azure AD authentication under Workspace Configuration in Citrix Cloud and add Azure AD Account under Identity Providers in Citrix Cloud. This allows users to authenticate using their Azure AD credentials to access their applications and desktops through the Workspace Experience. The Cloud Connectors are not directly involved in the Azure AD authentication process for Workspace Experience12.

Without a bound SSL certificate, the SSL virtual server cannot establish secure connections and will be in a DOWN state.

According to the Citrix documentation, “To enable SSL offloading for a virtual server, you must bind an SSL certificate to the virtual server.”

The image you sent shows the configuration commands for setting up an SSL virtual server and services. However, there is no command to bind an SSL certificate to the virtual server.

Therefore, the correct answer is D. The SSL Certificate is NOT bound to the virtual server.

https://docs.citrix.com/en-us/citrix-adc/13/ssl/ssl-offload-howto.html

According to the Citrix documentation1, the Citrix ADC SDX appliance allows administrators to upgrade the Citrix ADC instances on an individual basis, without affecting the other instances or the SDX appliance. This allows the instances to run different firmware versions and provides flexibility and convenience for the administrator.

The dig +trace command can be used to resolve DNS requests by tracing the path from the root name servers to the authoritative name servers. This can help identify any issues with DNS resolution or delegation. The nslookup command can also be used to query DNS records, but it does not provide the trace option. The curl command can be used to transfer data from or to a server, but it does not resolve DNS requests. The ping command can be used to test the connectivity and latency between two hosts, but it does not resolve DNS requests.

 To ensure the line-of-business application is added to Favorites and users cannot remove it, the Citrix Administrator should add the phrase “KEYWORDS: Mandatory” to the application properties3.

Citrix Virtual Delivery Agents offer optional install components. For help desk personnel to shadow or view user sessions, Citrix relies on Microsoft Windows Remote Assistance, which integrates with Citrix Director’s " Shadow " feature.

During VDA installation, administrators must select Windows Remote Assistance to allow help desk technicians to:

Observe the user’s session

Interactively assist them

Troubleshoot live issues

The other options do not provide session viewing capabilities:

VDA Upgrade Agent handles upgrade automation

MCS I/O Driver is related to Machine Creation Services storage handling

Real-Time Audio Transport handles audio protocol optimization

Documentation References:

Citrix VDA Installation Guide → Additional Components (Remote Assistance)

Citrix Director Features → Session Shadowing Requirements

 To view license information in Studio, an administrator must have at least the Read Licensing delegated administration permission. The built-in Full Administrator and Read-Only Administrator roles have that permission1.

 When creating a custom scope, the Full Administrator role is not available because custom scopes are designed to limit administrators’ permissions to specific objects or tasks within the Citrix environment.

According to the Citrix documentation1, the No-Monitor option allows the administrator to remove health checks from specific bound services. This option is useful when the administrator wants to reduce the number of health checks sent to the backend resources, or when the administrator knows that a particular service is always up and does not need to be monitored.

The Control layer contains the Site database in a Citrix Virtual Apps and Desktops Architecture model. The Site database stores the running site configuration, plus the current session state and connection information. The Access layer contains the components that users need to connect to their apps and desktops, such as StoreFront and Citrix Gateway. The User layer contains the user profiles, policies, and data. The Resource layer contains the machines that host the apps and desktops, such as VDAs and hypervisors

According to the Citrix documentation1, burst capacity allows an instance to use more bandwidth than its dedicated bandwidth when there is spare bandwidth available on the SDX appliance. The priority parameter determines which instance gets the spare bandwidth first. A higher priority value indicates a higher priority. Therefore, the administrator can configure burst capacity of 1GB with priority 10 on the instance that requires more bandwidth, to meet traffic requirements.

1: Citrix Virtual Apps and Desktops 7 Deployment and Administration - Configure burst capacity

 According to the Access Control Lists documentation, the add ns acl command is used to create an extended ACL that can filter packets based on various parameters, such as source IP address, source port, action, and protocol. An extended ACL can define the conditions that a packet must satisfy for the Citrix ADC to process the packet, bridge the packet, or drop the packet. Therefore, to bridge traffic originating from 192.168.10.200, a Citrix Administrator can use the following command:

add ns acl bridge_192.168.10.200 BRIDGE -srcIP 192.168.10.200

This command creates an extended ACL named bridge_192.168.10.200 with the action BRIDGE and the source IP address 192.168.10.200. Any packet that matches these conditions will be bridged to the destination without processing by the Citrix ADC.

According to the Citrix documentation, the command bind cs vserver MYVPN_http -lbvserver Vserver-CS-1 binds a load balancing virtual server to a content switching virtual server. This means that the content switching virtual server will forward the requests that match its policies to the load balancing virtual server. In this case, the content switching virtual server MYVPN_http has a policy that matches requests for http://server.citrix.lab, so it will forward those requests to the load balancing virtual server Vserver-CS-1. Therefore, the users trying to access http://server.citrix.lab will be connected to the Vserver MYVPN_http, which will then connect them to Vserver-CS-1.

The Citrix Diagnostic Toolkit is a rapid deployment platform that delivers a suite of tools and automation options in an easy to use structured format that closely resembles the look and feel of any standard Windows application, even though each tool is an independent standalone application. The easy to use built in menus and shortcuts allow you to quickly and effectively configure multi-vector data collection and integrate third party tools for more robust and comprehensive debugging sessions1.

1: Citrix Diagnostics Toolkit - 64bit Edition

This is because having multiple Cloud Connectors can provide redundancy and high availability in case one of the connectors fails or needs maintenance. Therefore, based on my last update, option B would be the correct approach.