SK0-005 CompTIA Server+ Certification Exam Free Practice Exam Questions (2025 Updated)

Link aggregation is the best option to implement on the new server to ensure the least amount of network downtime but a good amount of network speed. Link aggregation is a technique of combining multiple physical network interfaces into one logical interface to increase bandwidth, redundancy, and load balancing. Link aggregation can improve the performance and availability of the server by allowing it to use more than one network path for data transmission and failover in case of link failure. Link aggregation can be implemented using various protocols, such as IEEE 802.3ad (LACP), Cisco EtherChannel, or Linux bonding. References: [CompTIA Server+ Certification Exam Objectives], Domain 4.0: Networking, Objective 4.1: Given a scenario, configure network settings for servers.

The error message "Configuring Memory..." and the fact that the server is stuck at this point strongly suggest thata DIMM (memory module) has failed. Memory issues are commonly diagnosed when servers hang during the memory configuration phase of boot.

DIMM failure (Answer A):When a memory module fails, the server can get stuck at the memory initialization process during boot.

VRAM insufficiency (Option B):VRAM (video memory) issues would typically cause display-related errors, not memory configuration issues.

RAID cache failure (Option C):RAID cache issues would lead to storage errors but not prevent the system from configuring memory.

BIOS update (Option D):While BIOS issues can cause boot failures, the error message suggests a memory-specific issue.

CompTIA Server+ Reference:This topic relates toSK0-005 Objective 3.3: Diagnose hardware problems.

A warranty is a type of asset management documentation that is commonly used as a reference when processing the replacement of a faulty server component. A warranty is a guarantee from the manufacturer or vendor that covers the repair or replacement of defective parts within a specified period of time. A purchase order, a license, or a baseline document are not directly related to the replacement of a faultyserver component. References: [CompTIA Server+ Certification Exam Objectives], Domain 1.0: Server Architecture, Objective 1.4: Explain asset management and documentation processes.

Kickstart Files (Linux): Kickstart files are configuration files that automate the Linux installation process. They contain pre-determined answers to installation prompts, allowing for identical and rapid deployment of multiple systems. (CompTIA Server+ Objectives SK0-004: 3.1, Red Hat documentation on Kickstart: https://access.redhat.com/documentation/)

Why other options are less ideal:

VM Template (A): Templates are useful for replicating the OS & some software, but might not capture all configurations.

Manual Configuration (C): Time-consuming and prone to errors when replicating across many servers.

Copy/Paste via SSH (D): Tedious, error-prone, and requires servers to be online before configuration.

Cloning (E): Can work but has version compatibility risks if the OS of the cloned server isn't identical to the new ones.

Scenario: Installing Windows on an 8TB drive, aiming for a single 8TB partition.

Solution: Use the GPT (GUID Partition Table) option (Option C):

GPT supports larger partitions (up to 18.4 million TB) compared to MBR (limited to 2TB).

VMFS, ZFS, and LVM are unrelated to the partitioning scheme in Windows.

In a situation where a server reboots randomly, the first step should be to check for any issues with the power supply. Random reboots can often be caused by intermittent power supply issues, which can be due to faulty power cables, loose connections, or problems with the power source itself. This is especially pertinent in environments like a paper mill where dust and debris might affect cable integrity. Since the issue occurs every other day and at random times, it's less likely to be caused by components that would typically fail due to overheating or other gradual issues (like RAM or CPU heat sink problems). Therefore, checking the power cables is the simplest and most direct first step to troubleshoot the issue.

RAID 5offers bothdisk redundancyandmaximum usable disk capacityby using block-level striping with parity. RAID 5 allows one drive to fail while still retaining data, and it uses only one disk’s worth of space for parity, maximizing the usable capacity.

RAID 5 (Answer C):Provides redundancy with only one disk's space used for parity, maximizing storage.

RAID 0 (Option A):Provides no redundancy; if one drive fails, all data is lost.

RAID 1 (Option B):Mirrors data, so redundancy is provided, but only half the capacity is usable.

RAID 10 (Option D):Combines RAID 1 and 0 for high performance and redundancy but requires half the disk space for mirroring.

CompTIA Server+ Reference:This topic is covered underSK0-005 Objective 1.5: Explain RAID levels and their benefits.

After removing the virus from the server, the administrator should perform the following actions to mitigate the issue from reoccurring and to maintain high availability:

Run a vulnerability scanner on the server to identify any other potential weaknesses or exposures that could be exploited by attackers.

Patch the vulnerability that allowed the virus to infect the server in the first place, using the latest updates from the database software vendor or a trusted source.

Update the antivirus software on the server to ensure it has the most recent virus definitions and can detect and prevent future infections. The other options are either unnecessary or counterproductive for this scenario. Repartitioning the hard drive, reformatting the OS, removing the database software, or air gapping the server from the network would cause downtime and data loss, while enabling a host firewall would not prevent a virus infection from within the network. References: CompTIA Server+ Certification Exam Objectives, Domain 5.0: Security, Objective 5.2: Given a scenario involving a security threat/vulnerability/risk, implement appropriate mitigation techniques.

QSFP+ (Quad Small Form-factor Pluggable Plus) connectors are used in high-density, high-speed networking solutions such as 40 Gigabit Ethernet (40GbE) interfaces. When upgrading a server's network to 40Gbps, QSFP+ is the appropriate choice due to its capability to support such high-speed data transfer rates. 10 GigE, SFP, and SFP+ connectors are used for lower speed connections (10Gbps and below for SFP+ and 10 GigE, and even less for SFP), making them unsuitable for a 40Gbps network upgrade.

The virtual server’s time is incorrect despite proper configuration of internal time servers.

Resolution: The engineer should manually correct the time (Option D):

If the internal time servers are configured correctly, manual adjustment is necessary.

Checking firewall rules would help identify NTP (Network Time Protocol) issues.

Replacing the CMOS battery is unlikely to be the cause of incorrect time.

A faulty PSU needs replacement, and the management team wants a solution to prevent future downtime.

Solution: Implement redundancy (Option D):

Redundant power supplies ensure that if one fails, the other takes over seamlessly.

Separate circuits, load balancing, and server monitoring are important but do not directly prevent PSU failures.

Deduplication is a process that eliminates redundant data blocks and reduces the amount of storage space needed. Disk quotas are policies that limit the amount of disk space that each user or group can use on a volume.

Port 22 is used for SSH (Secure Shell), which is a secure and encrypted protocol for remote access to a server. Port 23 is used for Telnet, which is an insecure and unencrypted protocol for remote access. Port 990 is used for FTPS (File Transfer Protocol Secure), which is a secure and encrypted protocol for file transfer. The administrator should open port 22 and close port 23 to enable SSH and disable Telnet, as SSH is more secure and reliable than Telnet. The administrator does not need to open port 990, as FTPS is not required for making configuration changes123.

References = 1: Remote Desktop - Allow access to your PC from outside your network(https://learn.microsoft.com/en-us/windows-server/remote/remote-desktop-services/clients/remote-desktop-allow-outside-access) 2: Test remote network port connectionin Windows 10 - Winaero(https://winaero.com/test-remote-network-port-connection-in-windows-10/) 3: Windows Command to check if a remote server port is opened?(https://superuser.com/questions/1035018/windows-command-to-check-if-a-remote-server-port-is-opened)

In RAID 10 arrays, disk performance is crucial, especially if they are high-speed 15K RPM SAS HDDs, as each disk in the array is part of a mirrored pair that also stripes data with another pair. When replacing a disk, it's essential that the new disk matches the specifications of the others, especially in terms of rotational speed (RPM). If the replaced disk is slower, it can significantly reduce the Input/Output operations per second (IOPS) of the entire array. This is because all disks need to work in tandem, and the slowest disk can become a bottleneck. Thus, checking the RPM of the newly replaced disk is a sensible first step to ensure it matches the performance of the other disks in the array.

When configuring a server rack, it's important to consider:

A.Floor load limitations: Server racks can be extremely heavy, especially when filled with equipment like blade servers. It is crucial to ensure that the floor can handle the load to avoid structural damage or failure.

B.Rack balancing: Properly distributing the weight in a server rack is important for stability. Heavier equipment should generally be placed at the bottom to prevent the rack from becoming top-heavy and risking a tip-over.

C.Proper lifting techniques: Using correct lifting techniques when placing servers into a rack is vital to prevent personal injury.

Off-site storage involves storing data backups in a physically separate location from where the servers and primary data reside. This protects critical data in case the main site is damaged or destroyed due to a natural disaster, such as floods, fires, or earthquakes. Off-site storage can be in the form of cloud storage or physical tapes stored in a geographically distant location.

Off-site storage (Answer A):It ensures that a company's critical data remains accessible even if the local infrastructure is compromised. This is a common part of disaster recovery planning and is crucial for business continuity.

Life-cycle management (Option B):While important for managing data from creation to deletion, it does not specifically protect data during disasters.

Environmental controls (Option C):These manage physical conditions like temperature and humidity but do not address the risk of data loss during disasters.

Data-at-rest encryption (Option D):Encryption protects the confidentiality of stored data but does not ensure availability in the event of a disaster.

CompTIA Server+ Reference:This topic is covered underSK0-005 Objective 4.1: Summarize disaster recovery methods and concepts.

When a server is acting strangely after a patch and services that should be enabled are disabled, it’s often a good first step to set the services to restart automatically and then reboot the server. This can resolve many issues as it ensures that all services start correctly upon reboot

A crash cart is the best low-cost option to connect to any server while on site in a data center with multiple server racks. A crash cart is a mobile unit that contains a monitor, a keyboard, a mouse, and cables that can be plugged into any server for direct access and control. A crash cart can be used for troubleshooting, maintenance, or configuration of servers without requiring remote access or network connectivity. A crash cart is also easy to move around and store in a data center. References: [CompTIA Server+ Certification Exam Objectives], Domain 2.0: Hardware, Objective 2.4: Given a scenario involving server management issues (e.g., remote access), troubleshoot using appropriate tools.

Before decommissioning and wiping a file server, it's crucial to verify the asset management documentation. This documentation provides detailed records of the server's lifecycle, including procurement, usage, maintenance, and decommissioning information. Ensuring that asset management documentation is up-to-date and accurate is essential before proceeding with the server's decommissioning to maintain proper inventory control, comply with regulatory and organizational policies, and facilitate any potential audits. While the media destruction method, recycling policy, and document retention policy are important considerations in the decommissioning process, verifying asset management documentation is the first step to ensure the server is correctly identified and accounted for in the organization's asset registry.