Summer Sale Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: s2p65

Easiest Solution 2 Pass Your Certification Exams

E20-260 EMC VPLEX Specialist Exam for Implementation Engineers Free Practice Exam Questions (2025 Updated)

Prepare effectively for your EMC E20-260 VPLEX Specialist Exam for Implementation Engineers certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

EMC E20-260 Premium Access     Download Demo    
Page: 2 / 4
Total 210 questions

When creating logging and metadata volumes, which LUN requirement applies to both volumes?

A.

Array LUNs must be zeroed-out.

B.

Array LUNs must be RAID 0

C.

Array LUNs must be thin.

D.

Array LUNs must be RAID 1

After registering Cluster-2 with ESRS during a VPLEX Metro cluster build, what is the next step to perform before the cluster is successfully built?

A.

Complete EZ-Setup Wizard on Cluster-1

B.

Complete EZ-Setup Wizard on Cluster-2

C.

Configure WAN connections on Cluster-1

D.

Configure WAN connections on Cluster-2

What is the purpose of I/O module 2 in a the VPLEX VS2 hardware configuration?

A.

WAN-COM connectivity

B.

Front-end connectivity

C.

Back-end connectivity

D.

Local-COM connectivity

You have added a new storage array into VPLEX, but it does not see it. Which VPLEX command will display the new storage array?

A.

vplexcli./clusters/cluster-/storage-elements/storage-arrays/array re-discover

B.

vplexcli:/array claim -s

C.

vplexcli:/clusters/cluster-//storage-elements/storage-arrays>array used-by-array

D.

vplexcli:/connectivity validate-be

Refer to the exhibit.

You are preparing to upgrade a VPLEX Metro system. You ran the version command to begin the verification process and received the output shown.

What is the most likely reason for the warning?

A.

The Metadata volume is in an NDU state.

B.

The Cluster Witness is at the wrong version.

C.

The Management Server is at the wrong version.

D.

The directors are in an NDU state.

Refer to the exhibit.

You are implementing a VPLEX Metro configuration, and some BE ports are not logged into the fabric.

Which VPLEX command should be performed?

A.

set topology p2p

B.

set enabled=true

C.

set topology loop

D.

set port speed

Where is the wwn-seed physically located on VS2 engines?

A.

On the back of the engine on the bottom of the chassis

B.

On the front of the management server

C.

On the front of the director

D.

On the front of the director bezel cover

What is true about VPLEX CLI?

A.

User can press the tab key to display all valid commands within the current context.

B.

“Storage-volume claim” command can be used in root context VPlexcli.

C.

Command syntax option –d is short for –default.

D.

Command “Connectivity validate-be” shows which ports can communicate with each other.

In Unisphere for VPLEX, which storage array does not require a mapping file when claiming storage volumes?

A.

VNX

B.

CLARiiON

C.

Celerra

D.

Symmetrix

How many management Ethernet connections exist between the management server and the engines?

A.

2

B.

4

C.

6

D.

8

What is the maximum number of Virtual Volumes that can be created in a VPLEX Version 5 Cluster?

A.

2000

B.

4000

C.

8000

D.

16000

A customer is performing maintenance on their network that might affect their VPLEX Witness VM.

What can be done to ensure there are no adverse effects due to a Witness outage?

A.

Disable the cluster's management server ipsec.

B.

Disable the VPLEX Witness.

C.

Shut down the VPLEX Witness VM.

D.

Shut down the cluster's management server.

Refer to the exhibit.

What is the result of the command?

A.

clustermirror becomes a top-level device but without any virtual volume created or guarantees about its data.

B.

clustermirror becomes a top-level device, and a virtual volume is created for the device if the parent had a virtual volume.

C.

clustermirror is broken down to its base extents.

D.

clustermirror is detached and discarded.

You are administering a VPLEX Metro configuration. When is it necessary to create a logging volume?

A.

Before creating a distributed device

B.

After creating a local device

C.

After creating a mobility job

D.

Before performing an NDU

A customer wants to implement VPLEX between two datacenters 200 km apart. The latency between the sites is 15 ms.

Which VPLEX topology is recommended?

A.

Metro

B.

Geo

C.

Local

D.

Global

Which vplexcli command will ensure that the directors SSD firmware has been upgraded to the correct version after the VPLEX NDU ?

A.

director firmware show-banks

B.

version –a

C.

version -a --verbose

D.

ll /**/internal-disks/*

Refer to the exhibit.

What is the purpose of VPLEX Witness in a Metro environment?

A.

Prevent cluster link failure and stop I/O transfer.

Split consistency groups and failover consistency groups.

B.

Send notifications and pause I/O transfer.

Initiate vault dump and failover consistency groups.

C.

Observe state of the clusters and suspend I/O.

Execute health check and resume I/O.

D.

Observe the state of the clusters and distinguish link outages.

Intercluster failures and resume or suspend I/O.

Do virtual volumes need to be taken off-line prior to upgrading VPLEX software, and why or why not?

A.

Yes, to preserve data integrity

B.

Yes, because the host-based multi-pathing software provides direct access during the upgrade

C.

No, because VPLEX software can be upgraded non-disruptively

D.

No, because the upgrading can be undone

Refer to the exhibit.

What does this 4-step VPLEX cache operation represent?

A.

Global Read Miss

B.

Local Read Hit

C.

Global Read Hit

D.

Local Read Miss

During the installation of a VPLEX Local, the command ‘configuration system-setup’ is issued. What is accomplished by this command?

A.

Launches EZ-setup Wizard

B.

Configures EMC system reports

C.

Exposes back-end storage to cluster

D.

Creates a logging volume

EMC E20-260 Premium Access     Download Demo    
Page: 2 / 4
Total 210 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved