Month End Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

H12-425_V2.0 Huawei HCIP-Data Center Facility Deployment V2.0 Free Practice Exam Questions (2025 Updated)

Prepare effectively for your Huawei H12-425_V2.0 HCIP-Data Center Facility Deployment V2.0 certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Huawei H12-425_V2.0 Premium Access     Download Demo    
Page: 1 / 1
Total 55 questions

In the FusionModule2000, if a device port complies with the Modbus RTU protocol, which device is used to connect to smart ETH gateway?

A.

ETH converter

B.

Access actuator

C.

Skylight actuator

D.

AC actuator

In operant conditioning, the subject is free to make responses at any time, So conditioning is measured by the rate of responding. In most other Ways, however, their forms of learning are essentially the same.

A.

When UPSs are connected in parallel, connect loads to the pL terminal.

B.

When a single UPS works and loads are of the same importance, connect all loads to the sL terminal.

C.

When a single UPS works and loads are divided into two levels, connect the primary load to the sL terminal and thesecondary load to the pl_ terminal.

D.

When the UPS is overloaded, the loads connected to the sL terminal will be powered off first to ensure continuous power supply to the loads connected to the pj_ terminal.

Which air supply mode requires reasonable raised floor height?

A.

Air supply mode using blast caps.

B.

Underfloor air supply mode

C.

Air supply mode using wind pipe

D.

In-row horizontal air supply mode

Which of the following PH values meets the water quality requirements of NetCol8000-E220?

A.

3

B.

5

C.

7

D.

9

Which of the following position is recommended for installing the smart ETH gateway?

A.

Control skylight

B.

Inside a network cabinet

C.

At the inner side of a door header

D.

At the side of a cable trough

In the FusionModule2000, the skylight actuator can control the rotating skylight in the aisle containment of the modular data center.

A.

True

B.

False

Which of the following statements about ECC800-Pro features are true?

A.

Supports multiple unlocking method including access card, password, fingerprint, and facial recognition.

B.

Supports the connection of eight access control devices and four cameras for a single smart module.

C.

Supports the cascadingof a maximum of 4 ECC800-Pros.

D.

Supports wizard-based deployment and commissioning.

The UPS5000-E-200K works in normal mode. If two ECMs are faulty, how does the UPS work?

A.

The UPS has no output.

B.

The UPS transfers to bypass mode.

C.

The LCD is off, but the UPS still works in normal mode.

D.

The UPS switches to battery mode.

When the UPS5000-E works in normal mode, in which condition will the UPS automatically transfer to bypass mode?

A.

Mains outage occurs.

B.

The power module is overloaded for a period longer than the specified time.

C.

Power module overtemperature occurs.

D.

Bypass module hardware is faulty.

Which of the following menus can be used by engineers to manually add devices on the NetEco?

A.

Data center planning

B.

Report management

C.

Alarm management

D.

System management

To modify the FusionModule2000 plan view of the ECC800-Pro, users need to log in to the WebUI as admin account.

A.

True

B.

False

Which of the following statements about the functions of the AC PDB is false?

A.

Supplies power to air conditioners.

B.

Supplies power to fans.

C.

Supplies power to theextinguishantcontrol panel.

D.

Supplies power to sockets in the modules.

Which of the following are components of NetCol8000-E220? (Choose three.)

A.

Indirect heat exchange system

B.

Mechanical auxiliary cooling system

C.

Spray system

D.

Electric control system

A data center is at the Tier IV level and uses Huawei FusionModule2000 smart module. In this smart module, the PDU8000 integrated PDF cannot be used to supply power to IT loads and precision air conditioners at the same time because isolation requirements are not met.

A.

True

B.

False

If the battery charge current limit coefficient of the UPS5000-E is set to 0.1C10, which of the following statements about this parameter is true?

A.

The maximum batten/ charge current is 0.1C10.

B.

The batten/ charge current is always 0.1C10.

C.

The battery float charge current is 0.1C10.

D.

The maximum battery charge current is 0.1C10.

Three UPS5000-E-400Ks from a 2+1 parallel system. Which of the following statements about the parallel system are true?

A.

The parallel system capacity displayed on the LCD is 1200 kVA.

B.

The networkingmode is set to one-to-multiple for one UPS, and set to one-to-one for the other two UPSs.

C.

If the load is 420 kW, each of two UPSs carries 210 kW load, and the other one is standby and does not carry load.

D.

If the load is 420 kW, each of the three UPSs carries 140kW load.

Huawei H12-425_V2.0 Premium Access     Download Demo    
Page: 1 / 1
Total 55 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved