H13-624_V5.5 Huawei HCIP-Storage V5.5 Free Practice Exam Questions (2025 Updated)

The OceanStor Pacific parallel file system service is designed for high-performance file access. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* explains: “The parallel file system aggregates small I/Os in cache to optimize latency and small file utilization. Large I/Os are forwarded to the home node, bypassing scale-out locks to reduce latency. Large I/Os use passthrough mode for direct disk writes, enhancing bandwidth. The system uses dynamic indexing, not fixed-length large-granularity indexes, to adapt to varying I/O patterns.” Let’s evaluate:

- Option A: True. The material confirms small I/O aggregation in cache for better latency.

- Option B: False. The system uses dynamic, not fixed-length, indexing, making this statement incorrect.

- Option C: True. Direct forwarding to the home node reduces lock overhead and latency.

- Option D: True. Passthrough mode for large I/Os improves bandwidth, as per the material.

Thus, option B is false.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* describes DME IQ: “DME IQ is a cloud-based management service that supports uploading performance logs and Disk Health Analysis (DHA) logs from Huawei flash storage. DHA logs include routine disk run data, such as health status and I/O statistics, used for predictive maintenance.” This confirms the statement is true.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* describes user roles in Huawei flash storage systems: “The administrator role is a built-in role with full privileges, including managing users, performing system upgrades, changing the system time, powering off the device, and restarting the device.” This role is designed for comprehensive system management, confirming that the statement is true.

The Huawei Ocean Protect Appliance leverages CPU core grouping and intelligent scheduling to optimize performance, as described in the *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)*. The material states: “CPU core grouping and intelligent scheduling in Ocean Protect appliances enable physical and logical isolation of resources, ensuring that specific cores are dedicated to specific tasks. This isolation reduces contention and minimizes latency for critical operations.” This directly supports option C, as the technology’s primary advantage is reducing latency through resource isolation.

- Option A: Incorrect. While load balancing is a feature of some Huawei storage systems, the training material does not specify that CPU core grouping and intelligent scheduling in Ocean Protect appliances focus on distributing jobs for load balancing. Instead, it emphasizes resource isolation.

- Option B: Incorrect. The material indicates that this technology prevents core overload by isolating tasks, avoiding high latency, making this statement false.

- Option D: Incorrect. Prefetching data and metadata to improve cache hit ratios is unrelated to CPU core grouping and scheduling, which focus on processor resource management, not cache operations.

Thus, option C is the correct advantage of this technology.

This question tests knowledge of the Huawei OceanStor Dorado series architecture, as covered in the *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)*. Let’s evaluate each option:

- Option A: True. The material confirms: “The back-end shared interface module of OceanStor Dorado 18000 is inserted into the enclosure, allowing simultaneous access to disk enclosures by all controllers in the engine.”

- Option B: True. The material states: “Dorado V6 series and converged storage products adopt the PCIe Scale-Out architecture for high-performance interconnects.”

- Option C: False. The material specifies: “OceanStor Dorado 18000 uses 100 Gbit/s RDMA shared interface modules for cross-engine expansion, supporting full interconnection between 8, 12, and 16 controllers.” The claim of 200 Gbit/s RDMA is incorrect, as 100 Gbit/s is the standard for Dorado 18000.

- Option D: True. The material notes: “OceanStor Dorado 18000 supports up to 28 interface modules and uses a 100 Gbit/s RDMA network for intra-engine mirroring and cross-engine interconnection.”

Thus, option C is false due to the incorrect RDMA speed.

The HyperCDP (Continuous Data Protection) feature in Huawei all-flash storage, like OceanStor Dorado, provides high-frequency snapshots. The *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)* states:

- Option A: True. “HyperCDP snapshots can be used for data analysis, application testing, and backup, as they provide consistent point-in-time copies.”

- Option B: True. “After a HyperCDP snapshot is created, write requests to the source LUN use copy-on-write (COW) technology, storing new data in a new storage pool location and updating the source LUN’s pointer.”

- Option C: False. The material clarifies: “HyperCDP snapshots can be directly mapped to hosts as read-only LUNs, without requiring file system sharing, for accessing point-in-time data.”

- Option D: False. “HyperCDP is optimized for high-density snapshots with low memory overhead, using metadata structures rather than full file system objects.”

Thus, options A and B are true.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* confirms: “The CLI command ‘show license_active’ is used to query details of activated licenses on Huawei flash storage systems, including license status and features enabled.” This makes the statement true, as the command is a standard tool for license management.

The Distributed Parallel Client (DPC) in Huawei OceanStor Pacific systems enables parallel file access. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* explains: “When adding DPC nodes, engineers can manually add nodes using DeviceManager by entering the management IP address of the node, not the service IP address. The management IP is used to establish control plane communication for node integration.” The service IP address is used for data access by clients, not for node creation or management tasks. Therefore, the statement that the engineer can add a node using the service IP address is false.

Configuring iSCSI block services on Huawei scale-out storage, like OceanStor Pacific, involves specific steps. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* states: “To enable iSCSI block services, the engineer must create a block storage pool to allocate storage resources and configure the iSCSI service to set up initiator-target relationships and network parameters.” Let’s evaluate:

- Option A: Required. A block storage pool is necessary to provide the capacity for iSCSI LUNs.

- Option B: Required. Configuring the iSCSI service is essential to enable the protocol and connectivity.

- Option C: Not required. DPC is used for file services, not iSCSI block services.

- Option D: Not required. DPC installation is unrelated to iSCSI configuration.

Thus, options A and B are mandatory.

The HyperMetro feature in Huawei storage systems, such as OceanStor Dorado, provides active-active data access with arbitration mechanisms to handle site failures. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* details HyperMetro arbitration modes:

- Option A: True. The material states: “In the absence of a quorum server, HyperMetro operates in static priority mode, where the preferred site is designated to win arbitration and continue services during a failure.”

- Option B: True. The material explains: “In static priority mode, if the preferred site fails, the non-preferred site does not automatically take over to avoid split-brain scenarios. Services stop, and manual intervention is required to forcibly start services on the non-preferred site.”

- Option C: False. The material clarifies: “In quorum server mode, the quorum server can be deployed on physical machines or virtual machines, provided it meets the performance and network requirements.” This makes the statement that it can only be deployed on physical machines incorrect.

- Option D: True. The material confirms: “In quorum server mode, if the link between storage systems fails, both systems send arbitration requests to the quorum server to determine which site continues providing services.”

Thus, option C is false.

The question focuses on the running statuses of remote replication pairs in Huawei’s flash storage systems, such as OceanStor Dorado. The *HCIP-Storage V5.5 Training Material (Module 4: StorageDesign and Implementation)* details the remote replication feature and its statuses. The material states: “When the pair running status is ‘Normal,’ the remote replication pair is fully synchronized, meaning data between the primary and secondary LUNs is consistent, and synchronization is complete.” This matches option C.

- Option A: Incorrect. The training material indicates that if a pair is deleted from one site, causing inconsistency, the status may not necessarily change to “To be recovered.” Instead, it may require manual intervention or reconfiguration, and “To be recovered” is typically associated with link failures or incomplete synchronization, not deletion.

- Option B: Incorrect. The “Split” status occurs when the pair relationship is interrupted, but it can be due to manual intervention or automatic triggers (e.g., link failure). The parenthetical “not manually” is misleading, as the material does not restrict “Split” to non-manual causes.

- Option D: Incorrect. The “To be synchronized” status indicates that the pair is preparing for synchronization but is not yet consistent. There is no requirement to manually disconnect the pair for single LUN service needs, as the system can operate with the primary LUN independently during this state.

Thus, option C is the only accurate statement based on official documentation.

The question focuses on the client access modes supported by Huawei OceanStor Pacific series storage systems, particularly for parallel access scenarios. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* explains: “The OceanStor Pacific series supports the NFS (Network File System) client access mode, which enables a single client to connect to multiple storage nodes for parallel data access. This mode is optimized for high-performance computing (HPC) workloads and supports MPI-I/O (Message Passing Interface Input/Output) for distributed applications.” NFS allows clients to access file systems across multiple nodes, facilitating scalable and parallel I/O operations, which aligns with the question’s description. The acronym “NFS” is the correct answer.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* details the low-level design (LLD) mode for Huawei scale-out storage: “In LLD mode, the Storage Deployment Tool (SDT) is used to plan nodes, networks, and clusters, generating a configuration file that guides subsequent installation and deployment.” The SDT ensures precise configuration for complex deployments, making it the correct tool for this task.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* addresses performance issue demarcation: “If the latency on the compute side is significantly higher than on the storage side, the issue is likely outside the storage system, such as in the host, network, or application layer. If the storage side showed high latency (e.g., due to disk performance limits), it would be reflected in the STORAGE metrics.” The statement incorrectly attributes the issue to the storage system, as higher compute-side latency points to external factors, making it false.

The multi-tenant feature in Huawei’s flash storage systems, such as OceanStor Dorado, is designed to isolate resources for different tenants to ensure data security and privacy. The *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)* explains: “The multi-tenant feature isolates both block and file resources, ensuring that tenants cannot access each other’s LUNs or file systems. This is achieved through logical partitioning and access control mechanisms.” The statement in the question claims that tenants cannot access each other’s LUNs but can access each other’s file systems, which contradicts the official documentation. The material emphasizes that file systems, like LUNs, are isolated per tenant, and cross-tenant access is prevented unless explicitly configured (e.g., through shared namespaces, which is not the default behavior). Therefore, the statement is false.

Configuring file services in Huawei scale-out storage systems, such as OceanStor Pacific, involves specific steps for standard protocols like NFS or CIFS. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* states: “To configure file services, the engineer must create a converged storage pool to allocate resources, create namespaces for organizing file systems, and enable file services on the relevant nodes. The Distributed Parallel Client (DPC) is optional and used for high-performance parallel file access, not a requirement for standard protocol scenarios.” Let’s evaluate:

- Option A: Not required. DPC is not mandatory for standard file service protocols.

- Option B: Required. A converged storage pool is needed to provide storage capacity.

- Option C: Required. Namespaces organize file service resources.

- Option D: Required. Enabling file services on nodes activates the protocols.

Thus, option A is the action not needed.

Changing the management network port IP in Huawei flash storage systems is a common initialization task. The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* states:

- Option A: False. “The CLI command to change the management IP is ‘change system management_ip_address,’ not ‘change system management_ip.’”

- Option B: True. “Management and maintenance network ports must use different network segments to avoid routing conflicts.”

- _Index C: False. “No license is required to change the management network port IP address; it is a basic configuration task.”

- Option D: True. “For serial port login, the maintenance terminal’s IP and the default management IP must be in the same segment to establish connectivity.”

Thus, options A and C are false.