H35-260 Huawei HCSA-Field-Transmission & PTN V1.0 Free Practice Exam Questions (2025 Updated)
Prepare effectively for your Huawei H35-260 HCSA-Field-Transmission & PTN V1.0 certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.
Which of the following does not belong to the multi-level connection monitoring mode of OTN
Which of the following queue scheduling mechanisms can ensure the priority of the most urgent and critical services?
In PTN, LSP is created statically. Which items are correct in the following description about LSP creation?
A certain wavelength division system is configured with the 1st to 20th waves, using the NS4 single board, and testing the M40 output port with a spectrum analyzer during commissioning. It is found that the optical power of the 20th wave
is significantly lower than the other 19th waves. What is the possible reason? ?
Which of the following options is not the cause of the R-LOF alarm?
After the LAN is divided into VLANs, if computers in different VLANs want to communicate, IP routing needs to be established. Which of the following solutions can be used?
The PWE3 technology in the PTN network often uses VLAN. Where is the VLAN in the Ethernet packet?
In the chain networking of Huawei NG-SDH equipment, if the SCC board of a single station is faulty, the site and the downstream site cannot log in.
Which of the items are unreasonable to configure the default route on the PTN device in the LTE solution?
Which of the following is not included in the function of the Inspector inspection tool?
It is known that the nominal value of single-wave input and output of OAU101 is -16/+4dbm, and the gain range is 20〜31db. If there is a wave of -20dbm signal at the input end, use DCM (A) (insertion loss 4db),
which is To make it reach the nominal output, the gain on the network management should be set to which of the following values
Which of the following are the basic requirements of the DWDM system for the light source?
Regarding the IS-IS backbone area, which of the following statements are correct?
MPLS is located between the data city road layer and the network layer in the TCP/IP protocol stack, and is used to provide services to the IP layer, and at the same time, it gets the business from the mallet road layer.
Which of the following statements about Uexpert is correct?
Both the 1310nm and 1550nm transmission windows are low-loss windows. In the DWDM system, only the 1550nm transmission window is used. Which of the following options is the main reason?
The key technology in the PTN network is IP/MPLS technology. How many levels can MPLS labels be nested?
In the PTN network, what are the parameters for measuring QOS?
In Huawei's PTN-LTE solution, which of the following FRR technologies have been deployed?
OptiX OSN8800 provides 8 kinds of DCM optical modules, corresponding to compensation distances of 10km, 20km, 40km, 60km, 80km, 100km, 120km and 140km
respectively
