CTFL4 BCS ISTQB Certified Tester Foundation Level CTFL 4.0 Exam Free Practice Exam Questions (2025 Updated)

The ISTQB fundamental test process consists of five main phases, as described in the ISTQB Foundation Level Syllabus, Version 4.0, 2018, Section 2.2, page 15:

Test planning and control: This phase involves defining the test objectives, scope, strategy, resources, schedule, risks, and metrics, as well as monitoring and controlling the test activities and results throughout the test process.

Test analysis and design: This phase involves analyzing the test basis (such as requirements, specifications, or user stories) to identify test conditions (such as features, functions, or scenarios) that need to be tested, and designing test cases and test procedures (such as inputs, expected outcomes, and execution steps) to cover the test conditions. This phase also involves evaluating the testability of the test basis and the test items (such as software or system components), and selecting and implementing test techniques (such as equivalence partitioning, boundary value analysis, or state transition testing) to achieve the test objectives and optimize the test coverage and efficiency.

Test implementation and execution: This phase involves preparing the test environment (such as hardware, software, data, or tools) and testware (such as test cases, test procedures, test data, or test scripts) for test execution, and executing the test procedures or scripts according to the test plan and schedule. This phase also involves logging the outcome of test execution, comparing the actual results with the expected results, and reporting any discrepancies as incidents (such as defects, errors, or failures).

Evaluating exit criteria and reporting: This phase involves checking if the planned test activities have been completed and the exit criteria (such as quality, coverage, or risk levels) have been met, and reporting the test results and outcomes to the stakeholders. This phase also involves making recommendations for the release or acceptance decision based on the test results and outcomes, and identifying any residual risks (such as known defects or untested areas) that need to be addressed or mitigated.

Test closure activities: This phase involves finalizing and archiving the testware and test environment for future reuse, and evaluating the test process and the test project against the test objectives and the test plan. This phase also involves identifying any lessons learned and best practices, and communicating the findings and suggestions for improvement to the relevant parties.

References = ISTQB Certified Tester Foundation Level Syllabus, Version 4.0, 2018, Section 2.2, page 15; ISTQB Glossary of Testing Terms, Version 4.0, 2018, pages 37-38; ISTQB CTFL 4.0 - Sample Exam - Answers, Version 1.1, 2023, Question 88, page 32.

Comprehensive and Detailed In-Depth Explanation:TheAgile Testing Quadrantsframework categorizes tests based on theirpurpose and audience:

Quadrant 1 (Q1): Technology-facing tests (unit and component tests).

Quadrant 2 (Q2): Business-facing tests supporting development (e.g., BDD tests).

Quadrant 3 (Q3):Business-facing tests that critique the system (B).

Includesusability testing, exploratory testing, and UATto ensure software meets user expectations.

Quadrant 4 (Q4): Technology-facing tests that critique the system (e.g., performance, security testing).

Option B correctly defines Q3since it focuses onevaluating the user experience, exploring the system, and validating business expectations.

The principle of early testing is applicable to all recognized software development models, including sequential, iterative, and incremental models. Starting test activities early in the lifecycle helps in identifying and addressing defects as soon as possible, which can save time and costs by preventing defects from propagating to later stages of development. This proactive approach enhances the overall quality and efficiency of the software development process.Reference:ISTQB CTFL Syllabus V4.0, Section 1.3

The tests at the bottom layer of the test pyramid run faster than the tests at the top layer of the pyramid because they are more focused, isolated, and atomic. They usuallytest individual units or components of the software system, such as classes, methods, or functions. They are also easier to maintain and execute, as they have fewer dependencies and interactions with other parts of the system. The tests at the top layer of the test pyramid, on the other hand, are slower because they cover larger pieces of functionalities, such as user interfaces, workflows, or end-to-end scenarios. They also have more dependencies and interactions with other systems, such as databases, networks, or external services. They are more complex and costly to maintain and execute, as they require more setup and teardown procedures, test data, and test environments. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 3.2.1, Test Pyramid1

ISTQB® Glossary of Testing Terms v4.0, Test Pyramid2

To apply one-dimensional equivalence partitioning to the ID requirement, we need to consider each condition individually:

Length of the ID: Valid partitions (5-10 characters), Invalid partitions (less than 5, more than 10) = 3 partitions.

Type of characters: Valid partitions (alphanumeric), Invalid partitions (non-alphanumeric) = 2 partitions.

First character: Valid partitions (letter), Invalid partitions (non-letter) = 2 partitions. Adding these partitions, we get a total of 3 (length) + 2 (character type) + 2 (first character) = 7 partitions. Thus, the correct answer is A​​.

The statement that refers to good testing practice to be applied regardless of the chosen software development model is option D, which says that involvement of testers in work product reviews should occur as early as possible to take advantage of the early testing principle. Work product reviews are static testing techniques, in which the work products of the software development process, such as the requirements, the design, the code, the test cases, etc., are examined by one or more reviewers, with or without the author, to identify defects, violations, or improvements. Involvement of testers in work product reviews can provide various benefits for the testing process, such as improving the test quality, the test efficiency, and the test communication. The early testing principle states that testing activities should start as early as possible in the software development lifecycle, and should be performed iteratively and continuously throughout the lifecycle. Applying the early testing principle can help to prevent, detect, and remove defects at an early stage, when they are easier, cheaper, and faster to fix, as well as to reduce the risk, the cost, and the time of the testing process. The other options are not good testing practices to be applied regardless of the chosen software development model, but rather specific testing practices that may or may not be applicable or beneficial for testing, depending on the context and the objectives of the testing activities, such as:

Tests should be written in executable format before the code is written and should act as executable specifications that drive coding: This is a specific testing practice that is associated with test-driven development, which is an approach to software development and testing, in which the developers write automated unit tests before writing the source code, and then refactor the code until the tests pass. Test-driven development can help to improve the quality, the design, and the maintainability of the code, as well as to provide fast feedback and guidance for the developers. However, test-driven development is not a good testing practice to be applied regardless of the chosen software development model, as it may not be feasible, suitable, or effective for testing in some contexts or situations, such as when the requirements are unclear, unstable, or complex, when the test automation tools or skills are not available or adequate, when the testing objectives or levels are not aligned with the unit testing, etc.

Test levels should be defined such that the exit criteria of one level are part of the entry criteria for the next level: This is a specific testing practice that is associated with sequential software development models, such as the waterfall model, the V-model, or the W-model, in which the software development and testing activities are performed in a linear and sequential order, with well-defined phases, deliverables, and dependencies. Test levels are the stages of testing that correspond to the levels of integration of the software system, such as component testing, integration testing, system testing, and acceptance testing. Test levels should have clear and measurable entry criteria and exit criteria, which are the conditions that must be met before starting or finishing a test level. In sequential software development models, the exit criteria of one test level are usually part of the entry criteria for the next test level, to ensure that the software system is ready and stable for the next level of testing. However, this is not a good testing practice to be applied regardless of the chosen software development model, as it may not be relevant, flexible, or efficient for testing in some contexts or situations, such as when the software development and testing activities are performed in an iterative and incremental order, with frequent changes, feedback, and adaptations, as in agile software development models, such as Scrum, Kanban, or XP, when the test levels are not clearly defined or distinguished, or when the test levels are performed in parallel or concurrently, etc.

Test objectives should be the same for all test levels, although the number of tests designed at various levels can vary significantly: This is a specific testing practice that is associated with uniform software development models, such as the spiral model, the incremental model, or the prototyping model, in which the software development and testing activities are performed in a cyclical and repetitive manner, with similar phases, deliverables, and processes. Test objectives are the goals or the purposes of testing, which can vary depending on the test level, the test type, the test technique, the test environment, the test stakeholder, etc. Test objectives can be defined in terms of the test basis, the test coverage, the test quality, the test risk, the test cost, the test time, etc. Test objectives should be specific, measurable, achievable, relevant, and time-bound, and they should be aligned with the project objectives and the quality characteristics. In uniform software development models, the test objectives may be the same for all test levels, as the testing process is repeated for each cycle or iteration, with similar focus, scope, and perspective of testing. However, this is not a good testing practice to be applied regardless of the chosen software development model, as it may not be appropriate, realistic, or effective for testing in some contexts or situations, such as when the software development and testing activities are performed in a hierarchical and modular manner, with different phases, deliverables, and dependencies, as in sequential software development models, such as the waterfall model, the V-model, or the W-model, when the test objectives vary according to the test levels, such as component testing, integration testing, system testing, and acceptance testing, or when the test objectives change according to the feedback, the learning, or the adaptation of the testing process, as in agile software development models, such as Scrum, Kanban, or XP, etc.References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.1, Testing and the Software Development Lifecycle1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.2, Testing Policies, Strategies, and Test Approaches1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.3.1, Testing in Software Development Lifecycles1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.1, Test Planning1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.2, Test Monitoring and Control1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.3, Test Analysis and Design1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.4, Test Implementation1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.5, Test Execution1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.6, Test Closure1

ISTQB® Glossary of Testing Terms v4.0, Work Product Review, Static Testing, Early Testing, Test-driven Development, Test Level, Entry Criterion, Exit Criterion, Test Objective, Test Basis, Test Coverage, Test Quality, Test Risk, Test Cost, Test Time2

Statement coverage is a metric used in white-box testing that measures the percentage of executable statements in the code that have been executed by the test cases. It is calculated as the number of statements executed by the tests divided by the total number of executable statements in the code, providing an indication of how much of the code has been tested​​.

This answer is correct because Behavior-Driven Development (BDD) is a test-first approach, where tests that express a shared understanding from stakeholders of how the application is expected to work, are first written in business-readable language (following the Given/When/Then format), and then made executable to drive development. BDD is a collaborative approach that involves testers, developers, business analysts, product owners, and other stakeholders in defining the expected behavior of the application using scenarios that describe the preconditions, actions, and outcomes of the application. BDD scenarios are written using a domain-specific language (DSL) that can be translated into executable test cases using tools such as Cucumber or SpecFlow. BDD aims to improve communication, collaboration, and feedback among the team members, and to deliver software that meets the customer’s needs and expectations. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 3.1.1.4

Statement D is correct. According to the ISTQB CTFL syllabus, both black-box test techniques (which focus on testing without internal knowledge of the application) and experience-based test techniques (which rely on testers' experience and intuition) can be applied to both functional and non-functional testing. Functional testing is concerned with what the system does, whereas non-functional testing looks at how the system performs under certain conditions. These techniques are versatile and can be employed to address both these aspects​​.

Non-functional testing includes testing of both technical and non-technical quality characteristics. Non-functional testing is the process of testing the quality attributes of a system, such as performance, usability, security, reliability, etc. Non-functional testing can be applied at any test level and can use both black-box and white-box test techniques. Non-functional testing can cover both technical aspects, such as response time, throughput, resource consumption, etc., and non-technical aspects, such as user satisfaction, accessibility, compliance, etc. Therefore, option B is the correct answer.

References: ISTQB® Certified Tester Foundation Level Syllabus v4.01, Section 1.3.1, page 13; ISTQB® Glossary v4.02, page 40.

Comprehensive and Detailed In-Depth Explanation:Decision rules define possiblecombinations of conditions and outcomes.

For this scenario:

Bulk discount has 3 categories(0%, 5%, 10%)

Frequent customer discount has 2 categories(Yes = +5%, No = 0%)

The total number of decision rules is:3 bulk discount options × 2 frequent customer options = 6 rules.

Thus, the correct answer is6 decision rules (B).

Experience-based testing techniques leverage the tester's intuition and prior experience to identify defects that systematic techniques might miss. These techniques are valuable because they can uncover issues based on real-world usage and scenarios that aren't always covered by more formalized black-box and white-box methods. The ISTQB CTFL Syllabus v4.0 highlights the complementary nature of experience-based techniques in providing a broader defect detection strategy​​.

Option D correctly explains what is represented by the lines A, B and the axes X, Y in a testing metrics chart. According to option D:

X-axis represents Time

Y-axis represents Count

Line A represents Number of open bugs

Line B represents Total number of executed tests

This information is essential in understanding and analyzing the testing metrics of a completed project.

References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Section 2.5.1, Page 35.

Comprehensive and Detailed In-Depth Explanation:The correct tool forcreating test cases, test data, and test proceduresis atest design and implementation tool (A).

(B) is incorrectas static testing tools focus oncode analysis, not test case creation.

(C) is incorrectbecause DevOps tools manageautomation pipelines, not test design.

(D) is incorrectbecause test execution tools focus onrunning tests rather than designing them.

Test design tools helpoptimize test coverage, reduce redundancy, and improve efficiency.

Comprehensive and Detailed In-Depth Explanation:Test automationimproves efficiency and accuracy, butit does NOT eliminate manual testing (D).

(A) is correctbecause automationspeeds up execution.

(B) is correctas automated tests produceconsistent and unbiased results.

(C) is correctbecause automationreduces human errors in repetitive tests.

However,manual testing remains essential for exploratory testing, usability testing, and complex test scenarios.

Comprehensive and Detailed In-Depth Explanation:Checklist-based testingusesspecific test conditions(B) that help testers ensure key aspects are validated. The checklist items can be derived from past defects, requirements, or regulatory standards.

(A) is incorrectbecause general guidelines lack specificity.

(C) is incorrectbecause checklists can be used for both manual and automated testing.

(D) is incorrectbecause checklists are useful for both functional and non-functional testing (e.g., security, performance).

Checklistshelp ensure completenesswithout enforcingstrictly scriptedexecution.

A failure is an event in which a component or system does not perform a required function within specified limits1. A requirement is a condition or capability needed by a user to solve aproblem or achieve an objective2. In this case, the requirement is that the diagnostics tests should execute in less than 2 seconds. Therefore, any event that violates this requirement is a failure. The only option that clearly violates this requirement is B. The diagnostic tests take too much time to execute. If the diagnostic tests take more than 2 seconds to complete, then they do not meet the specified limit and thus fail. The other options are not necessarily failures related to the specified requirement. Option A. The diagnostic tests fail to start after a system reset is a failure, but not related to the time limit. It is related to the functionality of the self-diagnostics module. Option C. The diagnostic tests that measure the speed of the memory, fail is also a failure, but not related to the time limit. It is related to the accuracy of the memory tests. Option D. The diagnostic tests fail due to incorrect implementation of the test code is also a failure, but not related to the time limit. It is related to the quality of the test code. References = ISTQB® Certified Tester Foundation Level Syllabus v4.0, Requirements Engineering Fundamentals.

Comprehensive and Detailed In-Depth Explanation:Test management focuses on planning and control activities. Test planning (II) involves defining test strategies, schedules, and resources, while test monitoring and control (V) ensures that testing activities are aligned with objectives and tracked effectively. Other activities, such as test design (I) and peer review facilitation (IV), are typically handled by testers or test leads.

This answer is correct because in Agile software development, work product documentation, such as user stories, acceptance criteria, or test cases, tends to be lightweight and concise, as the focus is on working software and frequent communication rather than comprehensive documentation. Manual tests tend to be often unscripted, as they are often produced using experience-based test techniques, such as error guessing or exploratory testing, which rely on the tester’s skills, knowledge, and creativity to find defects and provide feedback. References: ISTQB Foundation Level Syllabus v4.0, Section 3.1.1.2, Section 3.2.1.2