Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

CWDP-304 CWNP Certified Wireless Design Professional Free Practice Exam Questions (2025 Updated)

Prepare effectively for your CWNP CWDP-304 Certified Wireless Design Professional certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

CWNP CWDP-304 Premium Access     Download Demo    
Page: 1 / 5
Total 281 questions

When troubleshooting coverage issues for a wireless network as it appears to new client associations, you should perform which type of survey?

Response:

A.

Active survey

B.

Passive survey

C.

A survey is not necessary.

D.

Predictive survey

Your customer is using PSK as their only authentication. They have an industry requirement to move to a stronger solution. Your recommendation

is to move to a certificate-based type of authentication where both the client and server require certificates. Which EAP type would be the best fit?

A.

EAP-FAST

B.

EAP-TTLS

C.

EAP-TLS

D.

PEAP

Given: A WLAN controller is connected to ABC Company's core layer 3 Ethernet switch with an IEEE 802.1Q trunk connection. The WLAN

controller's native

VLAN is VLAN 6 and its IP address is 10.0.14.2 /24. Lightweight APs supporting centralized forwarding are connected to the network on VLANs 7,

8, and 9, and they each build a Layer 3 tunnel back to the WLAN controller's IP address.

The dynamically assigned IP addresses received by each AP from a DHCP server will be ________________.

A.

Associated with the VLAN on which they are connected.

B.

Associated with the native VLAN of the WLAN controller.

C.

Associated with VLAN 1, the default VLAN for new APs

D.

Associated with a non-routable VLAN until the MAC address of the AP is removed from the controller's MAC filter

What inexpensive tool is capable of locating neighbor WLANs if that is your only need?

A.

WLAN scanner

B.

Site Survey software

C.

Spectrum Analyzer software

D.

Wireless-Specific Protocol Analysis software

When performing an indoor predictive site survey to make the WLAN planning and design cycle more efficient, what is a best practice for configuration of the simulated APs in the predictive modeling software?

Response:

A.

Always use the default 2.2 dBi omnidirectional antenna patterns for simulated APs.

B.

If dynamic RRM will be used, AP transmit power should be set to an estimated average level of the expected client devices, such as 25 mW.

C.

All simulated APs should be set to 20 MHz channels only.

D.

Defining custom AP and antenna patterns will yield more accurate prediction data than the pre-configured vendor AP/antenna combinations.

You are testing a VoWLAN deployment, and your communication measurements show a certain amount of lost packets. What would be an

acceptable packet error rate value to still provide acceptable call quality?

A.

There should be 0% error in a VoWLAN type of deployment

B.

No more than 1% PER max should be acceptable

C.

No more than 4% PER max should be acceptable

D.

No more than 8% PER max should be acceptable

If radar has reportedly been detected on your WLAN deployment, what bands would you consider avoiding?

Response:

A.

5 GHz UNII-2 and 2e

B.

5 GHz UNII-2 and 3

C.

5 GHz UNII-2, 2e, and 3

D.

5 GHz UNII-1 and 2

E.

5 GHz UNII-1, 2, and 3

Even when a full pre-design site survey is not performed, what is always recommended to be performed within the deployment areas?

A.

A spectrum analysis walkthrough

B.

An AP-on-a-stick survey of 37% of the facility as this amount provides all of the statistical information required for good design

C.

A scan m the 5 GHz band looking for common loT interferes

D.

A scan in the Sub-i GHz bands to determine If sideband interference will impact 2 4 GHz operations

One of your customers plans on providing wireless coverage to a warehouse facility. After performing an initial walkthrough, you collect the

following information:

The central part of the warehouse is between 400 and 600 feet (122 to 183 meters) from the warehouse switches mounted on the walls.

✑ The warehouse storage is composed of metallic racks with varying inventory levels and contents, from electronics and plastic toys to food

pallets and juice bottles.

✑ Workers need basic data coverage from their working location, and are not highly mobile. They usually work from one single aisle, and their

laptop is on a cart with wheels.

What would be your one recommendation to provide coverage to the central area of the warehouse?

A.

Equip workers laptops with a directional antenna and install APs less than 328 feet (100m) away from the switch.

B.

In this case, extend the cable length just beyond 328 feet (100 m) and position APs as close as possible to the central area of the

warehouse.

C.

Position APs along the walls, and equip the APs with Yagi antennas to cover the central area.

D.

Install APs for client access in the central area and use a mesh backhaul link to connect to the DS.

Looking at a client radio specification sheet that states Receive Sensitivity of −82 dBm @ 18 Mbps would mean:

Response:

A.

It would need to hear a signal <−82 dBm in order to use the 24 Mbps PHY rate.

B.

It is only capable of transmitting at 18 Mbps PHY rates at −82 dBm.

C.

It must hear a signal >−82 dBm in order to demodulate the 18 Mbps PHY rate.

D.

It must hear a signal <−82 dBm in order to demodulate the 18 Mbps PHY rate.

How are EAP messages transported over 802.11 wireless LANS?

Response:

A.

EAP-Fast

B.

PEAP

C.

EAPOL

D.

EAP_TLS

When deploying APs outdoors, what additional component needs to be used that is not needed indoors?

A.

Antennas

B.

NEMA enclosures

C.

Ethernet cables

D.

PoE

You have designed a WLAN with a plan for 87 APs m a large office building. The customer has informed you that the budget is not as large as they hoped and they can only purchase 53 APs What action should be taken?

A.

Simply increase the output power of the APs by 30 percent to accommodate tor the smaller number of purchased APs

B.

Perform a complete redesign of the wireless network and inform the customer if some original requirements cannot be accomplished

C.

Remove as many walls as possible within the facility so that the signals can travel a g

D.

Use only 2.4 GHz radios because the signals can be received at a greater distance

What type of standards-based encryption is used by office extension APs for the traffic tunnel?(Choose all that apply.)

Response:

A.

CAPWAP

B.

LWAPP

C.

TKIP

D.

AES

E.

DTLS

What are three potential benefits when an organization lets their employees bring their own device onto the company s network"?

A.

Enhanced productivity Decreased costs and Increased satisfaction

B.

Enhanced productivity Increased costs, and Decreased satisfaction

C.

Enhanced productivity. Increased costs, and Increased satisfaction

D.

increased security Enhanced productivity, and Decreased attack surface

During a post-validation assessment, you have configured a client for 802.1X/EAP but it is not passing authentication. Which areas should you check in the WLAN configuration?

Response:

A.

Whether the RADIUS server is online and configured for the matching port on the APs and WLAN controllers

B.

Whether the RADIUS shared secret is properly configured on the supplicant and authentication server

C.

Whether the authenticator is configured to support the EAP type(s) your client is configured for

D.

Whether the client has a fully valid certificate

What is the minimum PoE budget needed on a switch to support 6 (six) APs that can only be powered using IEEE 802.3at if no other details are provided?

Response:

A.

320 W

B.

60 W

C.

180 W

D.

240 W

When installing a cloud-based AP, what is the most common process used?

Response:

A.

Configure the AP as an autonomous AP and then, when it connects to the cloud, it will be reconfigured.

B.

Configure a profile for the AP in the cloud and then connect it for automatic configuration.

C.

Connect the AP to the network and configure it from the cloud assigning a configuration or policy set to the AP.

D.

Configure the AP with a local controller and then, when it connects to the cloud, it will be reconfigured.

Which type of building material causes the most attenuation of Wi-Fi signals'?

A.

Fire-rated steel door

B.

Brick wall

C.

Drywall

D.

Plywood

What action should be taken after implementing a WLAN based on the design developed from the site survey process?

A.

Post-installation survey

B.

Requirements analysis

C.

Gathering facility documentation

D.

Design the infrastructure services

CWNP CWDP-304 Premium Access     Download Demo    
Page: 1 / 5
Total 281 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved