Summer Sale Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: s2p65

Easiest Solution 2 Pass Your Certification Exams

CWNA-107 CWNP Certified Wireless Network Administrator Free Practice Exam Questions (2025 Updated)

Prepare effectively for your CWNP CWNA-107 Certified Wireless Network Administrator certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Page: 3 / 3
Total 156 questions

Which one of the following 802.11 PHYs is more likely to be used in an industrial deployment but not likely to be used in standard office deployments?

A.

SIG

B.

VHT

C.

OFDM

D.

HT

You are installing AP to be used by 23 laptops. All laptops will connect on the 5 GHz frequency band. A neighbor network uses channels 1 and 6. What channel should be used for this AP and why?

A.

Channel 6, because it is always best to use this channel

B.

A 5 GHz channel, because channels 1 and 6 are 2.4 GHz channels they have no impact on the decision

C.

Channel 1, because it is best to use the channel with the lowest frequency

D.

Channel 11, because channels 1 and 6 are in use nearby

In which plane of the three networking planes is an access point configured by a WLAN controlled?

A.

Control

B.

Management

C.

Security

D.

Data

The IEEE 802.11-2016 standard requires VHT capable devices to be backward compatible with devices using which other 802.11 physical layer specification (PHY)?

A.

ERP-PBCC

B.

DSSS

C.

OFDM

D.

HR/DSSS

The BSA of an AP covers the area used by the sales and marketing department. Thirty-five stations operate in this space. The user indicate that they need more throughput and all stations are 5 GHz capable 802.11ac clients. The current AP configuration uses 20 MHz channels in both 2.4 GHz and 5 GHz. What is the least expensive solution available for increasing throughput for these users without implementing configuration options that are not recommended?

A.

Use a 160 MHz channel on the 5 GHz radio

B.

Use a 40 MHz channel on the 5 GHz radio

C.

Install a second AP in the coverage area

D.

Use a 40 MHz channel on the 2.4 GHz radio.

What statement about 802.3, Clause 33 Power over Ethernet is true?

A.

Only midspan PSEs are supported.

B.

The lowest voltage drop is achieved when using CAT6 instead of Cat5 or CAT5e.

C.

Only endpoint PSEs are supported.

D.

When using CAT5 cabling, you increase the maximum draw available to the PD over that available with CAT6.

Page: 3 / 3
Total 156 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved