Black Friday Speed Sale: Save 75% on Every Exam Bundle! Use coupon code below now! - Ends in 0d 00h 00m 00s - Coupon code: stp75

Easiest Solution 2 Pass Your Certification Exams

300-120 Cisco Implementing Cisco Wireless Advanced Solutions (300-120 WLSI) v1.2 Free Practice Exam Questions (2026 Updated)

Prepare effectively for your Cisco 300-120 Implementing Cisco Wireless Advanced Solutions (300-120 WLSI) v1.2 certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2026, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Page: 2 / 2
Total 105 questions

The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm. However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied. What actions should be taken to resolve this issue?

A.

Disable Cisco Hyperlocation, change the Cisco Hyperlocation detection threshold, and then enable it.

B.

Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it on the WLAN.

C.

Place the APs to monitor mode, shutdown the radios, and then change the Cisco Hyperlocation detection threshold.

D.

Shutdown all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again.

An engineer must implement a CPU ACL that blocks web management traffic to the controller, but they also must allow guests to reach a Web Authentication Redirect page. To which IP address is guest client HTTPS traffic allowed for this to work?

A.

DNS server IP

B.

controller management IP

C.

virtual interface IP

D.

client interface IP

All APs are receiving multicast traffic, instead of only the APs that need it. What is the cause of this problem?

A.

The multicast group includes all APs

B.

The wrong multicast address was used

C.

The multicast group is assigned the wrong VLAN

D.

Multicast IGMP snooping is not enabled

An engineer is troubleshooting a Cisco CMX high-availability deployment and notices that the primary and backup Cisco CMX servers are both considered primary. Which command must the engineer run on the backup server?

A.

cmxha convert backup

B.

cmxha backup convert

C.

cmxha secondary convert

D.

cmxha convert secondary

An engineer completed the basic installation for two Cisco CMX servers and is in the process of configuring high availability, but it fails. Which two statements about the root of the issue are true? (Choose two.)

A.

The Cisco CMX instances are installed in the same subnet.

B.

The types of the primary and secondary Cisco CMX installations differ.

C.

The delay between the primary and secondary instance is 200 ms.

D.

The sizes of the primary and secondary Cisco CMX installations differ.

E.

Both Cisco CMX installations are virtual.

An engineer has configured the wireless controller to authenticate clients on the employee SSID against Microsoft Active Directory using PEAP authentication.

Which protocol does the controller use to communicate with the authentication server?

A.

EAP

B.

802.1X

C.

RADIUS

D.

WPA2

A network engineer created a new wireless network that will be used for guest access. The corporate network must utilize all rates. The guest network must use only lower rates instead of 802.11n data rates. To what must the WMM policy of the WLAN be set to accomplish this task?

A.

required

B.

allowed

C.

disabled

D.

mandatory

An engineer is defining a new Cisco AVC profile with different rules for HR and VIP users. Both user types connect to a single SSID and authenticate by using their Active Directory credentials via Cisco ISE. The engineer wants to apply the AVC profile dynamically to the user types.

Which Cisco AV pair attribute must be applied to Cisco ISE?

A.

policy-avc-role

B.

policy-role-avc

C.

avc-profile-name

D.

role-name-avc

On a Cisco Catalyst 9800 Series Wireless Controller, an engineer wants to prevent a FlexConnect AP from allowing wireless clients to connect when its Ethernet connection is nonoperational. Which command set prevents this connection?

A.

config terminal

wireless flexconnect profile [profile name]

ethernet-fallback-enable

end

B.

config terminal

wireless flexconnect profile [profile name]

fallback-radio-shut

end

C.

config terminal

wireless profile flex [profile name]

fallback-radio-shut

end

D.

config terminal

wireless profile flex [profile name]

ethernet-fallback-enable

end

A customer configures iPSK for use with a Cisco Catalyst 9800 Series controller. The configuration is complete, but the wireless client fails to authenticate to the network. Which implementation resolves this issue?

A.

Enable iPSK on the WLAN.

B.

Configure the DHCP Required option on the policy profile.

C.

Configure an accounting list on the policy profile.

D.

Enable the AAA Override option on the policy profile.

Refer to the exhibit. An event company must gather location-tracking details of wireless clients at an event where clients will be given free guest access to the Wi-Fi. A network engineer must integrate a Cisco WLC with a Cisco CMX server. Which command must be run?

A.

B.

C.

D.

Page: 2 / 2
Total 105 questions
Copyright © 2014-2026 Solution2Pass. All Rights Reserved