Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

300-815 Cisco Implementing Cisco Advanced Call Control and Mobility Services (CLACCM) Free Practice Exam Questions (2025 Updated)

Prepare effectively for your Cisco 300-815 Implementing Cisco Advanced Call Control and Mobility Services (CLACCM) certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Page: 1 / 4
Total 221 questions

What is a capability of the gateway-preferred, network-based recording option in Cisco UCM?

A.

It requires SIP trunk and CTI with recording application.

B.

Cisco UCM integrates with recording destination via SIP trunk.

C.

It uses BIB of IP phone to fork audio to the recording destination.

D.

It initiates when the application (recorder) dictates that it must be initiated.

An engineer must route all SIP calls in the form of @example.com to the SIP trunk gateway corporate local. Which two SIP route patterns can be used to accomplish this task? (Choose two.)

A.

example.com@gateway.corporate.local

B.

*@example.com

C.

gateway.corporate.local

D.

example.com

E.

*.*

Customers that call into a company’s IVR report that when they try to select an option, none of the prompts work. The administrator determines that the calls are coming in across an H.323 gateway. While analyzing the dial peer that points toward Cisco UCM, the administrator notices that no DTMF method is configured. Which command resolves this issue?

A.

dial-peer voice 2 voip

dtmf-relay sip-kpml

B.

dial-peer voice 2 voip

dtmf-relay h245-alphanumeric

C.

dial-peer voice 2 voip

dtmf-relay sip-notify

D.

dial-peer voice 2 pots

dtmf-relay h245-alphanumeric

Which configuration element of a hunt group allows for changing Calling Party Transformations settings?

A.

line group

B.

hunt pilot

C.

route group

D.

hunt list

An engineer set up and successfully tested a TEHO solution on the Cisco UCM. PSTN calls are routed correctly using the IP WAN as close to the final PSTN destination as possible. However, suddenly, calls start using the backup local gateway instead. What is causing the issue?

A.

WAN connectivity

B.

LAN connectivity

C.

route pattern

D.

route list and route group

A user in location X dials an extension at location Y. The call travels through a QoS-enabled WAN network, but the user experiences choppy or clipped audio. What is the cause of this issue?

A.

missing Call Admission Control

B.

codec mismatch

C.

ptime mismatch

D.

phone class of service issue

A company has users that are logged in to hunt groups. However, there is a requirement for hunt group configurations to provide an option to turn on audible ringtones when calls to a line group arrive at a phone that is logged out and on a break. This ringtone alerts a logged-out user that there is an incoming call to a hunt list to which the line is a member, but the call does not ring at the phone of that line group member because of the logged-out status. Which action meets this requirement?

A.

Configure the HLog softkey on the phone so that while a user is logged off, it plays an audible tone when a call is missed.

B.

Set the service parameter Party Entrance Tone to True."

C.

Configure the service parameter hunt group logoff notification and specify the name of the ringtone file.

D.

Set the service parameter Enterprise Feature Access number for hunt group logout and set up an access number

When the services key is pressed Cisco Extension Mobility does not show up. What is the cause of the issue?

A.

The URL configured for Cisco Extension Mobility is not correct.

B.

Cisco Extension Mobility Service is not running.

C.

The phone is not subscribed to Cisco Extension Mobility Service.

D.

Cisco Extension Mobility is not enabled in the Phone Configuration Window (Device > Phone)

A network engineer designs a new dial plan and wants to block a certain range of numbers (8135100 through 8135105). What is the most specific route pattern that can be configured to block only the numbers in this range?

A.

813510[012345]

B.

813510[12345]

C.

813510[^0-5]

D.

81XXXXX

Refer to the exhibit An engineer deploys a Cisco Unified Border Element for SIP trunk interconnection to an ITSP The engineer performs test calls but there is no audio when the called party picks up the phone. What must the engineer do to resolve the issue?

A.

Disable SIP User Agent bind status (media).

B.

Decrease the SIP max-forwards value to 16.

C.

Disable SIP early-media for 180 responses with SDP

D.

Enable Check media source packets.

An administrator has a requirement that the agents that receive calls from PSTN now must have a queue to hold the calls until they can be answered, but the customer cannot afford a contactcenter solution. The administrator discovered a feature called Native Call Queueing on Cisco UCM. Where must the administrator configure Native Call Queueing functionality?

A.

CTI route point

B.

hunt list

C.

hunt pilot

D.

hunt group

Refer to the exhibit.

An administrator is troubleshooting why users are not hearing audio when dialing long distance numbers across their Cisco Unified Border Element. The customer’s carrier has a requirement that dialing long distance requires an access code to be entered. Looking at the exhibit, what two actions can be taken to correct signaling? (Choose two.)

A.

Enable PRACK.

B.

Enable Early Offer on the Cisco Unified Border Element.

C.

Enable the supplementary-service media-renegotiate command.

D.

Enable Media Flow Around

E.

Enable Mid-Call Signaling Consumption.

Refer to the exhibit. When setting up a new connection to Cisco UCM, the engineer must use out-of-band DTMF. Which configuration meets this requirement?

A.

dtmf-relay h245-alphanumeric

B.

dtmf-relay sip-kpml

C.

dtmf-relay cisco-rtp

D.

dtmf-relay rtp-nte

A new Cisco UCM deployment is configured, and now the customer requires a set of 10 DNSs to park the calls starting with 8. The users must use the softkey to park the call. Which configuration must be performed to achieve this requirement?

A)

B)

C)

D)

A.

Option A

B.

Option B

C.

Option C

D.

Option D

An administrator configured Extension Mobility on Cisco UCM. Users report that logins are successful, but the phones do not have an Extension Mobility option after logging in. The administrator verified that Extension Mobility is enabled on the devices and that the log-out profile is valid. Which action must the administrator take to resolve the issue?

A.

Subscribe all device profiles to the Extension Mobility phone service.

B.

Delete the identity trust list file from the phone(s).

C.

Change the Extension Mobility URL from HHTP to HTTPS.

D.

Restart the Cisco Extension Mobility and Cisco Extension Mobility application services.

Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?

A.

System > Location Info

B.

Call Routing > Route/Hunt > Local Route Group Names

C.

System > Device Pool

D.

Call Routing > Emergency Location > Emergency Location (ELIN) Groups

Refer to the exhibit.

Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as “YOW” are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user +1613-555-1234 dials the number?

A.

calling number 613-555-1234 and numbering type “subscriber”

B.

calling number 011-1-613-555-1234 and numbering type “subscriber”

C.

calling number 011613-555-1234 and numbering type “international”

D.

calling number 613-555-1234 and numbering type “national”

Refer to the exhibit. A collaboration engineer is troubleshooting an issue where the PSTN calls of a Cisco UCM IP phone user are not reaching the PSTN gateway. Which action resolves the issue?

A.

Change the calling search space of the user's line or device.

B.

Change the "Call Classification" to "OnNet" on the route pattern.

C.

Ensure that the user's phone is assigned to a device pool with the correct local route settings.

D.

Deselect "Block this pattern" on the route pattern.

An engineer Is configuring a Cisco Unified Border Element. The SIP ITSP requires a DNIS of 10-digits and DTMF tones sent in the RTP stream on the outbound leg of a call. Which code completes this configuration?

A)

B)

C)

D)

A.

Option A

B.

Option B

C.

Option C

D.

Option D

An engineer has temporarily disabled toll fraud prevention for SIP line calls on a Cisco CME12.6x and must enforce security and toll fraud prevention for the SIP line side on Cisco Unified CME. Which configuration must be used to start this process?

A.

voice service volp

Ip address trusted list

B.

voice service volp

enablo ip address trust authentication

C.

voice service volp

enable Ip address trust list

D.

voice service volp

ip address trusted authenticate

Page: 1 / 4
Total 221 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved