Spring Sale Special - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

350-601 Cisco Implementing Cisco Data Center Core Technologies (350-601 DCCOR) Free Practice Exam Questions (2026 Updated)

Prepare effectively for your Cisco 350-601 Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2026, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Page: 5 / 6
Total 347 questions

An engineer must integrate Cisco ACI with a VMware vSphere environment The requirement is to use a VMware Distributed Virtual Switch and to assign the encapsulation VLAN of the EPG from the VLAN pool Which configuration set accomplishes this goa?

A.

Create a VMM domain association under the EPGs Create a VLAN pod with static alocated VLANs.

B.

Create a physical domain association under the EPGs Create a VLAN pool with static alocated VLANs.

C.

Create a physical domain association under the EPGs. Create a VLAN pool with dynamic alocated VLANs

D.

Create a VMM domain association under the EPGs Create a VLAN pool with dynamic alocated VLANs.

What is a key feature of Cisco Intersight in the context of IJCS management?

A.

It acts as a physical network switch.

B.

It provides centralized management and monitoring from the cloud.

C.

It provides centralized management and monitoring from fabric interconnects.

D.

It acts as a virtual network switch.

Refer to the exhibit.

Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?

A.

IPv4 unicast address

B.

IPv4 multicast address

C.

IPv4 gateway address

D.

IPv4 anycast address

A QoS policy on Cisco UCS must meet mese requirements:

    No-drop class must be configured

    Jumbo frames must be enabled without fragmentation.

Which configuration must be implemented to meet mese conditions?

A.

Configure Platinum System class and specify an MTU value of 9100 bytes.

B.

Configure slow-drain timers and specify an MTU value of 9100 bytes.

C.

Create a Flow Control Policy and specify an MTU value of 9000 bytes.

D.

Create a QoS system class and specify an MTU value of 9216 bytes.

An engineer must implement a VXLAN-based data center Interconnect. The long-distance transport provided by a service provider is IP-based, supports a maximum MTU of 1554 bytes, and does not support outbound traffic replication. Which action must be taken to build the data center Interconnect?

A.

Implement BGP EVPN Ingress replication

B.

Create an IP access list and associate It with VNI to replicate traffic to remote VTEPs

C.

Announce host reachability over BGP.

D.

Configure a route map to associate the IPs of the remote VTEPs

Which two Cisco UCS components are upgraded when using Install Infrastructure Firmware? (Choose two.)

A.

Cisco UCS Manager

B.

board controller

C.

I/O modules

D.

storage adapters

E.

BIOS

An engineer must configure a Cisco MDS 9000 Series Switch for traffic analysis from the storage array. The storage array is connected to the interface fc2/1 in VSAN 10 and the traffic analyzer to fc4/2. The capture file must include ingress and egress traffic between the switch and the storage array. Also, only traffic in VSAN 10 must be captured. Which configuration set meets these requirements?

A.

interface fc4/2switchport mode SD no shutdown!span session 1 source interface fc2/1 destination interface fc4/2 source filter vsan 10

B.

Interface fc4/2switchport mode trunk switchport trunk allow vsan 10 no shutdown!span session 1 source interface fc2/1 tx destination Interface fc4'2 rx no suspend

C.

Interface fc4/2switchport mode auto no shutdown!span session 1 source interface fc2/1 rx destination interface fc4/2 source filter vsan 10 no suspend

D.

interface fc4/2 switchport mode STno shutdown!span session 1 source interface fc2/1 destination interface fc4/2 source filter vsan 10

Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed?

A.

any service profile that has no host firmware policy defined

B.

any service profile that uses a user-created host firmware policy

C.

any service profile that is not in the root sub-org

D.

any service profile that uses the global-default host firmware policy

An architect must select a scripting language for automating Cisco Nexus Series Switches and Cisco UCS Manager. The language must comply with these requirements:

•Can run in interactive mode for testing

•Can be run from different operating systems without changing code •Extensible with a diverse set of libraries

Which scripting language meets these requirements?

A.

Bash

B.

Python

C.

TCL

D.

JavaScript

A new user with access privileges in the Finance department moves to a new Admin department. The user must have access privileges to the Admin department data and applications inside the Cisco UCS Manager. Which set of changes must be implemented in Cisco UCS Central for the user to acquire the privileges?

A.

Create a new locale Admin and add the Admin department to the Admin locale.

B.

Create an Admin user account and remove the authentication service for the Finance privileges

C.

Disable the Finance user account and add the authentication service for the Admin privileges.

D.

Delete the old locale Finance and remove the Finance department from the Finance locale

Refer to the exhibit.

Which type of backup is required to restore a Cisco UCS configuration?

A.

full state

B.

system configuration

C.

logical configuration

D.

all configuration

An engineer must configure device aliases for a Cisco MDS 9000 Series Switches-based SAN fabric. The configuration must meet these requirements:

    The engineer must be prompted before the changes are committed to the database

    Pending changes must be explicitly displayed on the console.

Which command accomplishes this task?

A.

device-alias distribute diffs-only

B.

device-alias enhanced

C.

device-alias commit

D.

device-alias confirm-commit

A Cisco UCS C-Series server needs to be installed in a data center. The server must be managed by using Cisco UCS Manager with a single cable for management and data traffic. Which set of commands must be run on the server after a physical connection is established?

A)

B)

C)

D)

A.

Option A

B.

Option B

C.

Option C

D.

Option D

An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch The solution must meet these conditions :

    It must use a challenge-response authenticator protocol that uses MD5 hashing with an incrementally changing identifier

    The RADIUS configuration must be automatically shared with other MDS switches in the environment

The RADIUS server is already defined. Which command set completes the configuration?

A)

B)

C)

D)

A.

Option A

B.

Option B

C.

Option C

D.

Option D

An engineer must back up the configuration of a Cisco UCS system for disaster recovery The backup must include the service profile deployed lo the server and all the associated settings The backup file must also be encrypted to protect passwords and other sensitive information Which backup type must be used?

A.

full state

B.

all configuration

C.

system configuration

D.

logical configuration

The network team needs permissions to access the Cisco UCS B-Series Servers via the Cisco UCS Manager GUI to configure the network and collect information about faults. The administrator wants to assign these permissions to the newly configured user called netops. Which set of tasks must the administrator perform to accomplish these goals?

A.

Deploy username noteps on the users locales. Assign the roles of network security and facility manager.

B.

Implement username netops on the locally authenticated user. Assign the roles of network administrator and operations.

C.

Enable username netops on the authenticated users. Assign the roles of storage administrator and facility manager.

D.

Configure username netops on the Cisco UCS Manager login profile. Assign the roles of AAA administrator and operations.

Refer to the exhibit. An engineer associates an ESX service profile to a blade server. The engineer adds a VLAN to the vNIC Template named vNIC-0 by using Cisco UCS Manager. The engineer discovers that the VLAN is missing on the vNIC of the ESX service profile. Which action adds the VLAN to the vNIC?

A.

Change Template Type for ESX to Updating Template.

B.

Change Template Type for vNIC-0 to Updating Template.

C.

Remove both templates and recreate them as Updating Templates.

D.

Remove the VLAN from the template and add the VLAN again.

Refer to the exhibit.

An engineer must connect a Cisco MDS Series Switch to a Cisco UCS domain using a port channel, but the link fails to activate. Which command activates the interface?

A.

switchport speed 8000

B.

switchport trunk mode off

C.

switchport rate-mode shared

D.

switchport mode F

A network engineer must configure a power redundancy policy on a Cisco UCS C-Series Rack Server. The power redundancy must support two power sources being used to power the server. Which configuration should be applied to meet the requirement?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

An engineer must shut down the Ethernet 1/2 interface when the Ethernet 4/5 interface state is down. Drag and drop the CLI commands from the bottom onto the blanks in the exhibit to implement this EEM. Not all commands are used.

Page: 5 / 6
Total 347 questions
Copyright © 2014-2026 Solution2Pass. All Rights Reserved