350-601 Cisco Implementing Cisco Data Center Core Technologies v1.1 (350-601 DCCOR) Free Practice Exam Questions (2026 Updated)
Prepare effectively for your Cisco 350-601 Implementing Cisco Data Center Core Technologies v1.1 (350-601 DCCOR) certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2026, ensuring you have the most current resources to build confidence and succeed on your first attempt.
All logins to a Cisco Nexus 9000 Series Switch must pass through the TACACS+ server at IP address 192.168.10.10. The configuration must meet these requirements:
• The TACACS+ server must be used for SSH and Telnet.
• The TACACS+ server key must be Cisco123!.
• Management VRF must be used for connectivity.
• The deployment must fail back to local credentials if the TACACS+ server fails to respond within 30 seconds.
Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the configuration. Not all code snippets are used.
A Cisco UCS Manager must be configured with four RADIUS servers. Which action permits Cisco UCS Manager to use RADIUS authentication from all four RADIUS servers before login?
An engineer needs to implement a solution that will provide telemetry of MDS 9000 switches in a SAN fabric. The solution should use Cisco Data Center Network Manager (DCNIM) with SAN insights feature. Which three steps are required to deploy the solution? (Choose Three.)
What is a benefit of independent resource scaling in Cisco
HyperFlex hybrid architecture?
Refer to the exhibit. Which configuration ensure that the cisco Nexus 7000 series switches are the primary devices for LACP?
Refer to the exhibit. An engineer is configuring Cisco Data Center Network Manager to automate the provisioning of Cisco Nexus 9000 Series Switches. The engineer must configure user access for network engineers to permit device operations in Interface Manager. The solution must hide Admin and Config Menu items in Interface Manager Which two roles must be assigned to the network engineers to meet these requirements? (Choose two.)
Which Feature differentiates Intersight Managed Mode from UCSM Managed Mode when configuring and managing a Cisco UCS-X Series Modular System?
What is a characteristic of the NFS protocol?
Refer to the exhibit An engineer must provision a VXLAN deployment The OSPF has already been configured as the underlay protocol All BGP configurations will be performed using the template method The deployment must meet these requirements
The local update source for leaf switches must be loopback 1
The router ID must be the local loopback IP address
The external BGP connections must use a template name
Drag and drop the configuration snippets from the bottom to complete the configuration
An engineer is implementing traffic monitoring for a server vNIC that is configured with fabric failover enabled. The requirement is for the traffic to be sent to an analyzer, even during a failure of one of the fabric interconnects. The analyzer is connected to unconfigured Ethernet ports on both fabric interconnects. Which configuration accomplishes this task?
Which storage technology provides a simple, high-capacity solution and offers a direct file-access level to the shared storage?
Refer to the exhibit. The network management system that is located at 192.168.10.10 and port 2000 must receive traps from the Cisco UCS Manager called UCSM. The community name is Cisco123! and the SNMP version must be the most secure.
These two commands have already been configured on Cisco UCSM.
UCS-A# scope monitoring
UCS-A/monitoring # enable snmp
Which command set completes the SNMP configu
An engineer must configure HSRP protocol on two cisco nexus 9000 series switches running a virtual port channel in addition, the HSRP implementation must meet these requirements:
Drag and drop the commands from the the right to complete a configuration of the HSRP on the left. The commands are used more than once. Not all commands are used
Refer to the exhibit.
An engineer prepared the configuration of OSPF in a text file named OSPF.txt. The engineer decided to remove all OSPF configurations. Which Python code must be added to accomplish this goal?
Refer to the exhibit. A network engineer must implement a micro-segmentation solution to allow communication between client and server EPGs but restrict traffic between endpoints located on the same EPG In the current deployment, all EPGs are members of the preferred group Which configuration meets these requirements?
Service degradation is reported on a VM that is deployed on a Cisco UCS blade server. The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12. Which two commands are needed to complete the configuration? (Choose two.)
Which storage appliance must be deployed to provide file system access using the NFS protocol?
Refer to the exhibit. Which value must be added to the LDAP provider to complete the LDAP group map configuration in Cisco UCS Manager?
Refer to the exhibit. An engineer associates an ESX service profile to a blade server. The engineer adds a VLAN to the vNIC Template named vNIC-0 by using Cisco UCS Manager. The engineer discovers that the VLAN is missing on the vNIC of the ESX service profile. Which action adds the VLAN to the vNIC?
What is the impact of upgrading the firmware version of the Cisco MDS 9200i Series Switch?
