COH-285 Cohesity Certified Protection Professional – NetBackup Appliances Free Practice Exam Questions (2026 Updated)

The correct answer is C because the failure is an authorization problem on the NetBackup client, not a basic network-connectivity failure. The job output explicitly states that nbumaster8 “is not an authorized server for host nbclient1,” followed by status 59: access to the client was not allowed. Cohesity NetBackup documentation maps status code 59 to “Access to the client was not allowed.” The controlling configuration is the client’s SERVER list. Cohesity states that the SERVER entry defines the list of NetBackup primary and media servers that can access the NetBackup client, and that media servers or other primary servers must be added for that client. Cohesity also explains that on UNIX servers and clients, the SERVER entries in bp.conf define the NetBackup servers that are allowed access, with additional entries identifying servers that can initiate scheduled backups. Therefore, the client rejected the backup request because the requesting server name was missing from the client’s server list or did not match the expected resolved name. References/topics: Status code 59, SERVER option for NetBackup clients, bp.conf, Host Properties > Clients > Servers, and NetBackup host-name authorization.

The replication job starts when the force interval for small replication jobs is reached. NetBackup SLP settings control how Storage Lifecycle Policy jobs are maintained and executed for the selected primary server. Cohesity documentation identifies these as SLP settings used to customize how SLP jobs run. For AIR replication batching, the controlling parameter here is SLP.MIN_SIZE_PER_REPLICATION_JOB. Official NetBackup documentation defines it as the smallest batch size that can run as a single replication job and states that the job does not run until enough images accumulate to reach that size, or until the force interval for small replication jobs is reached. (veritas.com)

In this scenario, three backups of 5GB each create only 15GB of eligible replication data. That is below the configured 20GB threshold, so NetBackup does not start the replication job based on size. Because the backup window has closed and no additional backup images will arrive, the batch cannot reach 20GB. NetBackup therefore submits the small replication batch when the oldest image reaches the configured 60-minute force interval. The force interval is specifically designed to prevent NetBackup from waiting too long before submitting a small replication job. (veritas.com)

The correct answer is C. During an image verification operation, NetBackup validates the backup image stored on backup storage by reading the backup volume and comparing what is present on that storage with the metadata recorded in the NetBackup catalog. Cohesity NetBackup documentation states that NetBackup verifies backup contents “by reading the volume and comparing its contents to what is recorded in the NetBackup catalog.” It also clarifies that this operation does not compare the backup image with the original client disk contents. Therefore, the validation scope is the readability and catalog consistency of the stored backup image, not a live comparison against the client file system and not a primary-server data check. This distinction is important operationally: image verification confirms that NetBackup can locate and read the blocks belonging to the backup image and that the stored image aligns with catalog records. It is not a restore test and does not prove that current client data is unchanged. References/topics: Catalog utility, Verify backup images, bpverify, NetBackup catalog image validation, and backup storage readability verification.

The default summary interval is 24 hours. In NetBackup Appliance AutoSupport/Call Home behavior, when Call Home is enabled and a monitored hardware or software failure occurs, the appliance uploads diagnostic and monitoring information to the AutoSupport server and also generates email notifications to the configured recipient list. The official Appliance AutoSupport Reference Guide describes three email notification types: an initial error notification when the failure is detected, a resolved notification when the failure clears, and “a 24-hour summary by email” for unresolved errors. The NetBackup Appliance Security Guide states the same operational sequence: the appliance sends an error email, a resolved email, and a 24-hour summary of currently unresolved errors. Therefore, 15 minutes, 1 hour, and 12 hours are not the documented default intervals for unresolved-error summary notification. Those values may resemble polling or alerting intervals in other monitoring systems, but NetBackup Appliance Call Home uses the daily summary model to reduce repeated notifications while keeping administrators informed of unresolved conditions. Reference topics: Appliance AutoSupport Reference Guide – About Call Home, Settings > Notification > Alert Configuration, and NetBackup Appliance Security Guide – Call Home alert behavior.