XK0-005 CompTIA Linux+ Exam Free Practice Exam Questions (2025 Updated)

rpm -qa lists all installed packages and filtering with perl will show if Perl is installed or not. This command is useful for verifying prerequisites like the presence of certain software on the system.

SSO (Single Sign-On) allows users to authenticate once and gain access to multiple systems or services without re-authenticating. This improves user experience and reduces the number of credentials users must manage.

Source: CompTIA Linux+ XK0-005 Exam Objectives, Domain 4: Security

The command docker run -d --restart always -p 5432:5432 -v /home/db:/var/lib/postgresql postgresql:12 ensures that the PostgreSQL container is started in detached mode (-d), it restarts automatically on system startup (--restart always), mounts the host directory /home/db to /var/lib/postgresql, and exposes port 5432. This is a typical setup for running a database in a Docker container.

The best command to use to list all current containers, regardless of their running state, is A. docker ps -a. This command will show all containers, both running and stopped, with details such as container ID, image name, status, and ports. The other commands are either invalid or not relevant for this task. For example:

B. docker list is not a valid command. There is no subcommand named list in docker.

C. docker image ls will list all the images available on the local system, not the containers.

D. docker inspect image will show detailed information about a specific image, not all the containers.

mtr (My Traceroute) is a network diagnostic tool that combines the functionality of traceroute and ping. It shows real-time packet loss and latency on a hop-by-hop basis. The -T option uses TCP instead of ICMP, and the -P 443 option specifies the remote port. This provides the best method for checking packet loss on port 443.

netstat is a command-line tool that displays network connections, routing tables, and a number of network interface statistics. It can be used to check if the SSHD service is listening on its default port (usually port 22) or any other configured port.

Ubuntu uses APT as its package manager.

Repository addresses are defined in /etc/apt/sources.list.

Incorrect Options:

B: Controls display of changelogs during upgrades.

C and D: Belong to Red Hat-based systems (YUM/DNF).

In Docker, a Dockerfile is a script that contains instructions to build a container image. The first line in a Dockerfile is typically the FROM directive, which specifies the base image from which the container will be built.

The correct syntax for specifying a base image is:rubyFROM :If no tag is provided, Docker will pull the latest version of the specified image by default.

The correct syntax for specifying a base image is:rubyFROM :If no tag is provided, Docker will pull the latest version of the specified image by default.

The correct syntax for specifying a base image is:rubyFROM :If no tag is provided, Docker will pull the latest version of the specified image by default.

The correct syntax for specifying a base image is:rubyFROM :If no tag is provided, Docker will pull the latest version of the specified image by default.

The correct syntax for specifying a base image is:rubyFROM :If no tag is provided, Docker will pull the latest version of the specified image by default.

httpd is the official Apache HTTP Server image available in Docker Hub.

The incorrect options:

BASE httpd → Incorrect, as there is no such directive in Dockerfile syntax.

USE httpd → Incorrect, this is not a valid Docker command.

INHERIT httpd → Incorrect, as Docker does not use INHERIT to specify base images.

Thus, the correct answer is A. FROM httpd.

JSON (JavaScript Object Notation) is a lightweight, human-readable, and widely used data-interchange format used in APIs, config files, and infrastructure tools (like Ansible, Terraform, etc.).

It is not a programming language (A), not a virtualization/container platform (B or D).

Step-by-Step Comprehensive Detailed Explanation:

Command Explanation:

Ctrl+C sends a SIGINT (interrupt signal) to the foreground process, stopping its execution.

Why Other Options are Incorrect:

A: Ctrl+D signals the end-of-file (EOF) in a shell but does not stop processes.

B: Ctrl+F moves the cursor forward but does not affect processes.

C: Ctrl+Z suspends the process (sends it to the background) but does not stop it permanently.

docker ps shows only running containers.

docker ps -a includes both running and stopped containers.

Incorrect Options:

B: Lists container images, not containers.

C: Shows resource usage of running containers.

D: Invalid syntax.

The correct answer is A. semanage port -a -t ssh_port_t -p tcp 2222

This command will allow the SSH server to bind to port 2222 by adding it to the SELinux policy. The semanage command is a utility for managing SELinux policies. The port subcommand is used to manage network port definitions. The -a option is used to add a new record, the -t option is used to specify the SELinux type, the -p option is used to specify the protocol, and the tcp 2222 argument is used to specify the port number. The ssh_port_t type is the default type for SSH ports in SELinux.

The other options are incorrect because:

B. chcon system_u:object_r:ssh_home_t /etc/ssh/*

This command will change the SELinux context of all files under /etc/ssh/ to system_u:object_r:ssh_home_t, which is not correct. The ssh_home_t type is used for user home directories that are accessed by SSH, not for SSH configuration files. The correct type for SSH configuration files is sshd_config_t.

C. iptables -A INPUT -p tcp --dport 2222 -j ACCEPT

This command will add a rule to the iptables firewall to accept incoming TCP connections on port 2222. However, this is not enough to fix the issue, as SELinux will still block the SSH server from binding to that port. Moreover, iptables may not be the default firewall service on some Linux distributions, such as Fedora or CentOS, which use firewalld instead.

D. firewall-cmd --zone=public --add-port=2222/tcp

This command will add a rule to the firewalld firewall to allow incoming TCP connections on port 2222 in the public zone. However, this is not enough to fix the issue, as SELinux will still block the SSH server from binding to that port. Moreover, firewalld may not be installed or enabled on some Linux distributions, such as Ubuntu or Debian, which use iptables instead.

The correct command to block the IP address 192.168.10.50 from accessing a Linux server is iptables -A INPUT -s 192.168.10.50 -j DROP. This command appends a rule to the INPUT chain that matches the source address 192.168.10.50 and jumps to the DROP target, which discards the packet. The other commands are incorrect because they either have invalid syntax, wrong parameters, or wrong order of arguments. References: CompTIA Linux+ Study Guide, Fourth Edition, page 457-458.

The slowness is caused by the CPU being overloaded. The iostat command shows that the CPU utilization is 100%, which means that there are more processes competing for CPU time than the CPU can handle. The other options are incorrect because:

The system is not running out of swap space, as shown by the iostat command, which shows that there is no swap activity (si and so columns are zero).

The memory is not exhausted, as shown by the free -m command, which shows that there is still available memory (avail column) and free buffer/cache memory (buff/cache column).

The processes are not paging, as shown by the vmstat command, which shows that there are no major page faults (majflt column) and no swap activity (si and so columns). References: CompTIA Linux+ Study Guide, Fourth Edition, page 417-419, 424-425.

The push action is used to publish the changes made in a local branch to a remote branch of a Git repository. This action will update the remote branch with the commits made in the local branch and synchronize the two branches. The rebase action is used to reapply commits from one branch onto another branch, creating a linear history of commits. This action does not publish any changes to a remote repository. The tag action is used to create an annotated reference to a specific commit in a Git repository. This action does not publish any changes to a remote repository. The commit action is used to record changes made in the local repository and create a new snapshot of the project state. This action does not publish any changes to a remote repository. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 20: Writing and Executing Bash Shell Scripts, page 579.

To terminate an unresponsive process immediately without waiting for a graceful shutdown, the administrator can use the command kill -SIGKILL 5545 (A). This will send a signal to the process with the PID 5545 that cannot be ignored or handled by the process, and force it to stop. The other commands will send different signals that may allow the process to perform some cleanup or termination actions, or may be ignored by the process. References:

[CompTIA Linux+ Study Guide], Chapter 6: Managing Processes, Section: Killing Processes

[How to Kill Processes in Linux]

To allow the same Kubernetes container configurations to be deployed in different environments without statically configuring custom locations, the engineer can use an ambassador container (D). An ambassador container is a proxy container that handles communication between containers and external services. It can dynamically configure locations based on environment variables or other methods. The other options are not related to this requirement. References:

[CompTIA Linux+ Study Guide], Chapter 11: Working with Containers, Section: Using Ambassador Containers

[How to Use Ambassador Containers]

The dnf update command will accomplish the task of installing the most recent versions of packages on a RPM-based OS. This command will check for available updates from the enabled repositories and apply them to the system. The apt-get upgrade command is used to install updates on a Debian-based OS, not a RPM-based OS. The rpm -a command is invalid, as -a is not a valid option for rpm. The yum updateinfo command will display information about available updates, but it will not install them. The yum check-update command will check for available updates, but it will not install them. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 19: Managing Packages and Software, page 559.

The firewall-cmd --list-services command will return the results for which the administrator is looking. This command will list all services that are allowed through the firewall in the default zone or a specified zone. A service is a predefined set of ports and protocols that can be enabled or disabled by firewalld. The firewall-cmd --get-services command will list all available services that are supported by firewalld, not only those that are allowed through the firewall. The firewall-cmd --check-config command will check if firewalld configuration files are valid, not list services. The systemct1 status firewalld command will display information about the firewalld service unit, such as its state, PID, memory usage, and logs, not list services. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 18: Securing Linux Systems, page 543.