Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

E20-375 EMC RecoverPoint Specialist Exam for Implementation Engineers Free Practice Exam Questions (2025 Updated)

Prepare effectively for your EMC E20-375 RecoverPoint Specialist Exam for Implementation Engineers certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

EMC E20-375 Premium Access     Download Demo    
Page: 1 / 3
Total 200 questions

A customer has a four-node RecoverPoint cluster using a VNX array. All LUNs are replicating and failover has been tested. The customer would like to integrate RecoverPoint and Unisphere. However, they are unable to manage the cluster through Unisphere.

What should the customer do to correct the issue?

A.

Convert to RecoverPoint/SE using Deployment Manager

B.

Reinstall the RecoverPoint splitter enabler on the VNX

C.

Rescan the VNX splitters in the management application

D.

Reinstall the RecoverPoint/SE license file

Which statement is true about Logged Access mode?

A.

RecoverPoint will roll back (or forward) the snapshots until the selected image is reached.

B.

RecoverPoint creates a virtual disk by pulling the needed data either from the snapshots or from the storage.

C.

RecoverPoint will retrieve the snapshot from the Image Access log.

D.

When Logged Access is disabled, all writes made to the image will be saved to the journal.

What collection period is automatically set when ‘Collect System Information’ is run from the ‘System Events’ pane?

A.

From 10 min. before to 10 min. after the selected event

B.

From 30 min. before to 30 min. after the selected event

C.

From 60 min. before to 60 min. after the selected event

D.

The previous 24 hours

For optimal performance when presenting gatekeepers for a VMAX splitter, how many FA ports should be used in each port group?

A.

4

B.

8

C.

12

D.

16

Refer to the exhibit.

In Unisphere for RecoverPoint, the status tab diagram of a particular Consistency Group shows two copies linked by a dashed green line on top of a solid green line. What type of link is this?

A.

Synchronous

B.

Asynchronous

C.

Fibre Channel

D.

iSCSI

A storage administrator is installing the VSI RecoverPoint Management plug-in, but the installation fails.

What could be causing this?

A.

vSphere client not installed

B.

vSphere client not running during the installation

C.

RPAs used were all virtual

D.

At least one virtual RPA present

A customer has a four-node RecoverPoint cluster replicating over a 10 Mbps WAN link. They have a requirement to upgrade the WAN link to 1 Gbps. This will require a change of the default gateway on the RPAs. They need to accomplish this with as little impact as possible.

What can be done?

A.

Use Deployment Manager to edit the cluster settings

B.

Pause replication and update one RPA at a time

C.

Pause replication and update all RPAs simultaneously

D.

Leave the Consistency Groups alone and update one RPA at a time

Which authentication method is available for use between the vRPA and the VNX when configuring RecoverPoint/SE with Deployment Manager?

A.

CHAP

B.

iSNS

C.

LDAP

D.

RSA

A company has a DR site connected using a 4 Gbps FC link and two RPAs on the primary site, and two RPAs at the DR site. They are experiencing high load events although the FC link is not fully utilized.

What would be the best solution to get the FC link utilization up as high as possible?

A.

Add two RPAs to the primary site and add two RPAs to the DR site

B.

Add two RPAs to the primary site only

C.

Use distributed consistency groups with one primary RPA and two secondary RPAs on the primary site

D.

Add two RPAs to the DR site only

Which Ethernet interface on an RPA is used for replication to the remote clusters?

A.

eth0

B.

eth1

C.

eth2

D.

eth3

You are protecting a volume using the wizard in Unisphere for RecoverPoint. Which state will the new Consistency Group be in immediately after completing the wizard?

A.

Initializing

B.

Active

C.

Paused

D.

Disabled

What is the maximum number of VMAX splitters that can be added to a RecoverPoint cluster?

A.

2

B.

4

C.

5

D.

6

A company has just installed a RecoverPoint solution and configured it with two clusters.

Which command will monitor system performance for both sites?

A.

export_statistics

B.

netstat -a

C.

balance_load

D.

config_io_throttling

You are adding a VMAX array to a RecoverPoint/CL environment.

What needs to be done?

A.

Verify there is a zone that includes the RPA ports and the same VMAX front end ports that are zoned to the production host initiator.

B.

Verify that the 16 new gatekeepers are in the same storage group as the repository and journals. Add the RPA initiator and port groups to the masking view.

C.

After setting up the masking view use boxmgmt to log in to one of the site leader RPAs and be sure to tag all volumes that RecoverPoint is masked to – including the production and copy volumes.

D.

Verify that the VMAX is at Enginuity microcode 5876 or higher. After doing the LUN masking, enable Write-Protect ByPass (WPBP). Ensure that the proper license for the VMAX is installed on the RPAs.

System events can be copied to the clipboard from which Unisphere for RecoverPoint view?

A.

RecoverPoint Dashboard

B.

Recovery

C.

RPA Clusters

D.

Admin

What are key use cases for RecoverPoint?

A.

Disaster Recovery, Operational Recovery, and Data Migration

B.

Disaster Recovery and Operational Recovery only

C.

Disaster Recovery and Data Migration only

D.

High Availability Solution Implementation

Which host command, run as the boxmgmt user, is available from the 'Run Internal Command' menu?

A.

ssh

B.

ls

C.

rm

D.

tracert

Which virtualization solution components are supported by RecoverPoint?

A.

Hyper-V, VMware vCenter monitoring, VMware SRM

B.

Hyper-V only

C.

VMware vCenter monitoring only

D.

VMware SRM only

A company recently acquired a new DR site and requires their production data to be replicated to this DR site.

What is an important consideration about the RecoverPoint out-of-band architecture?

A.

Performance on the production site is not impacted.

B.

Site-to-site connectivity needs to be based on Fibre Channel.

C.

Maximum asynchronous replication speed is 400 MBps.

D.

Maximum synchronous replication speed is 400 Mbps.

When selecting the semi-automatic zoning method while installing RecoverPoint/SE, which zones are displayed per RPA?

A.

One RPA HBA zoned to SP-A

One RPA HBA zoned to SP-B

All RPA HBAs zoned to each other

B.

All RPA HBAs zoned to SP-A

All RPA HBAs zoned to SP-B

All RPA HBAs zoned to each other

C.

All RPA HBAs zoned to SP-A

All RPA HBAs zoned to SP-B

One RPA HBA zoned to multiple HBA ports on each of the other RPAs in the cluster

D.

One RPA HBA zoned to SP-A

One RPA HBA zoned to SP-B

One RPA HBA zoned to a single HBA on each of the other RPAs in the cluster

EMC E20-375 Premium Access     Download Demo    
Page: 1 / 3
Total 200 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved