Month End Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

HPE0-V15 HP Delta - Building HPE Hybrid IT Solutions Free Practice Exam Questions (2025 Updated)

Prepare effectively for your HP HPE0-V15 Delta - Building HPE Hybrid IT Solutions certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Page: 1 / 2
Total 80 questions

A customer plans to use HPE ProLiant servers for line-of-business applications. They want to configure the servers to increase reliability.

Which workload profile should the customer use?

A.

Virtualization – Max Performance

B.

Transactional Application Processing

C.

I/O Throughput

D.

Mission Critical – trade performance and reliability

Refer to the exhibit.

You observed some high temperature alerts on a switch shown in the middle rack of the exhibit. The cooling in the data center is following best practices for the layout in the exhibit. The switch is an HPE 5945 series switch, and all the fans are operating normally. The switch is racked so that its ports face the rear of the rack. The administrator noticed the fan modules have red handles.

What should the administrator do to resolve the issue?

A.

Replace the fan modules with port-to-power fan modules.

B.

Add additional fan modules to the switch.

C.

Replace the fan modules with power-to-port fan modules.

D.

Change the fan direction with the fan preferred direction command.

A customer is implementing a redundant AD servers to support then lab environment .They have the following requirements

• four rack servers, each with 2 CPUs from AMD. at least 256GB of RAM. FC Dual Port hba

• HPE Nimble AF20 with 17TB useable capacity

• integration into their existing HEP FlexFabric 57io and HPE SN3000B Fibre Channel SAN switches.

it the customer needs more capacity in the future, they will use scale-out growth Which server model should you recommend to this client?

A.

ProLiant DL SGOGen10

B.

ProLiant DL 360 Gen 10

C.

Proliant DL 385 Gen10

D.

ProLiant DL 325 Gen10

You are installing a DL385 GEN10 LFF server at a customer site. The customer has a P8i6i-a RAID controller in the host After installing the provided 8 LFF disks in the front drive Days, you realize that the order also included two more SFF drives for the OS to boot from, but there are no SFF drive slots in the server, because it shipped from the factory.

Which action must be performed to finish the installation?

A.

Order the optional Premium 6 SAS/SATA+2 NVMe cage to house the two SFF drives.

B.

install the two SFF drives in the two included SFF slots in the universal Media Bay.

C.

Give the two SFF drives to the customer to keep on-site in case of future drive failure.

D.

Order the optional 2-SFF rear drive box to house the two SFF drives

What is the process or writing data to two locations within a single array in real time?

A.

replication

B.

business continuity

C.

data mirroring

D.

clustering

A customer needs a server memory subsystem that meets the following requirements:

    approaches the speed of traditional DRAM

    ensures high capacity, high performance, and ongoing data safety in case of a power failure

Which HPE memory feature meets the customer needs?

A.

Load Reduced DIMMs

B.

Memory Mirroring

C.

Fast Fault Tolerance Memory

D.

Persistent Memory

A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.

Which HPE management offering meets the customer’s needs?

A.

OneView

B.

Insight Remote Support

C.

InfoSight

D.

Insight Online

Match the feature to the lowest iLO5 license in which it is available

Refer to the exhibit.

Drag the correct protocols from the left to the appropriate area on the topology on the right.

A solution integrator is installing new data center components including an HPE G2 Advanced Rack with two Standard Series G2 PDUs A customer observing the installation process questions whether there will be sufficient power for additional equipment that may be added in the future.

How should the solution integrator respond?

A.

HPE G2 Advanced racks allow additional PDUs to be added if additional equipment requires more outlets or more available power

B.

HPE Standard Series G2 PDUs allow additional inlet power cords to support additional equipment in the future.

C.

HPE PDUs support elevated temperatures up to 75°C (1673F), in case the additional equipment power draw results in increased heat generation.

D.

Two HPE Standard G2 PDUs will support 42U of racked equipment, so any equipment added in the future will be accommodated by the current PDU configuration

A customer needs to update a server’s firmware using the latest Support Pack for ProLiant (SPP). They use a bootable USB flash drive to do so, and they select Interactive Mode on boot. Once the device boots, they are unsure how to proceed and ask for your assistance.

What can you tell them to do to easily update the firmware?

A.

Download a new version of Smart Update Manager.

B.

From Interactive mode, select the “Force Firmware” option.

C.

Reboot the server with the flash drive and leave in default mode.

D.

Run interactive mode from the Operating System instead.

Read the question, and then refer to the exhibit.

display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0

An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.

The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.

What must you do to resolve this issue?

A.

Configure the interface as an access port.

B.

Configure the PVID of the interface to be VLAN 20.

C.

Permit VLAN 20 on the interface.

D.

Configure the interface as an IRF port.

A customer needs to share files cost-effectively among their Microsoft Windows server over a local network.

Which storage solution meets this requirement?

A.

Storage Area Network (SAN)

B.

Network File System (NFS)

C.

Direct Attached Storage (DAS)

D.

Network Attached Storage (NAS)

A small, expanding law firm wants to replace its single Windows server

The server will be kept in their library without a rack. They want a server that allows for internal storage growth and is capable of adding PCI adapters.

Which HPE server model type should you recommend?

A.

HPE BL

B.

HPE XL

C.

HPE DL

D.

HPE ML

Why is SNMPv2c considered to be insecure?

A.

SNMPv2c agents only accept GET requests which match their read-only community string

B.

SNMPv2c community strings are transmitted in clear text

C.

SNMPv2c only allows the signing of the message payload

D.

SNMPv2c agents only encrypt WRITE messages.

A customer is facing high and unpredictable latency on an HPE ProLiant DL380 Gen10 server equipped with P408i-a controller

Which tool can display an Array Diagnostic Report?

A.

Smart Storage Administrator

B.

HPE OneView

C.

UEFl Embedded Diagnostics

D.

HPE InfoSight

A customer needs to consolidate software, hardware, and backup in a single integrated solution to reduce the cost and complexity of their IT environment

Which solution meets the customer needs?

A.

HPE StoreEasy

B.

HPE StoreOnce

C.

HPE Apollo Server

D.

HPE SimpliVity

A customer requires five HPE ProLiant servers that will be mounted in a rack and shipped from site to site All servers must be online within an hour of site arrival

Which feature will ensure that the servers will be available to the business if travel motion has damaged a DIMM?

A.

HPE Fast Fault Tolerance Memory protection

B.

Triple+ Parity RAID protection

C.

Flash Back Write Cache battery protection

D.

HPE Active Health System integration

A customer requests a quote for an HPE storage solution that meets these requirements

• fully redundant dual-controller storage array with no single points of failure

• 1 Gb or 10 Gb ISCSI connectivity

• at least four host-facing ISCSI ports

• capable of expanding usable capacity in small increments of one-to-two disks

Which HPE storage solution should be proposed?

A.

D3000

B.

MSA 1050

C.

Nimble AF20Q

D.

Nimble HF20

A customer needs to add storage capacity to a host In a remote branch office. They have limited IT resources, so the solution requires ease of integration at a low price point

Which HPE Storage family best meets these needs?

A.

HPE D3000 Enclosure

B.

HPE 3PAR StoreServ

C.

HPE MSA Storage Array

D.

HPE NimbIe Storage

Page: 1 / 2
Total 80 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved