ISTQB-CTFL ISTQB Certified Tester Foundation Level (CTFL v4.0) Free Practice Exam Questions (2025 Updated)

Rule 5 in the decision table indicates that when the object is within 5 metres of the vehicle and the sensitivity mode is switched "on", no LED is lit. This matches the conditions and actions described in the decision table provided, ensuring that only the red LED is lit when the sensitivity mode is on and the object is within 1 metre, otherwise no LED is lit .

Regression testing is a type of testing that verifies that previously tested software still performs correctly after changes. Regression testing can help prevent re-opening of defects fixed earlier by ensuring that they do not cause any new failures or side effects. The first recommendation to the company is to verify existing regression test suite are adequate, and augment it, if required, in order to ensure that defects fixed earlier get re-tested in each subsequent build. This can help improve the coverage and effectiveness of regression testing and detect any regression defects as soon as possible. Automating existing test suites may also help reduce the time and effort required for regression testing, but this is not the first recommendation, as automation may not be feasible or cost-effective for all test cases. Analyzing the product modules containing maximum defects and getting them thoroughly tested and defects fixed as a one-time activity may also help reduce the defect density and improve the quality of those modules, but this is not the first recommendation, as it does not address the root cause of re-opening defects fixed earlier. Training or replacing the teams responsible for development and testing of the modules containing maximum number of defects may also help improve their skills or performance, but this is not the first recommendation, as it may not be necessary or appropriate for all teams. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 2, page 19; Chapter 4, page 45.

Configuration management is a process that establishes and maintains consistency among work products throughout their life cycle. Configuration management affects testing in various ways, such as:

Proper configuration management ensures that testers can uniquely identify the tested item, which can help traceability, reproducibility and accountability.

Proper configuration management ensures that testers have access to consistent versions of software components and testware, which can help reliability, compatibility and efficiency.

Proper configuration management ensures that testers can track changes and defects in software components and testware, which can help verification, validation and reporting.

Proper configuration management ensures that testers can control the configuration of the test environment, which can help stability, security and performance. Configuration management is not a prerequisite for test planning, as test planning can proceed without configuration management, although it may be less effective or accurate. Configuration management is not important for developers only, but for testers as well, as it affects the quality and consistency of the testing process and products. Configuration management has a significant influence on the test project, as it affects various aspects of testing, such as traceability, reproducibility, reliability, compatibility, efficiency, verification, validation, reporting, stability, security and performance. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, Chapter 6, page 60-61.

A decision table is a technique that shows combinations of inputs and/or stimuli (causes) with their associated outputs and/or actions (effects). A decision table consists of four quadrants: conditions (inputs), actions (outputs), condition entries (values) and action entries (results). The following statements about decision tables are true:

II. Test cases derived from decision tables can be used for component tests. Decision tables can be used to test components that have multiple inputs and outputs that depend on logical combinations of conditions. Decision tables can help cover all possible combinations or scenarios in a systematic way.

III. Several test cases can be selected for each column of the decision table. A column of a decision table represents a unique combination of condition entries and action entries. Several test cases can be selected for each column by varying other input values or expected results that are not part of the decision table. The following statements about decision tables are false:

I. Generally, decision tables are generated for low risk test items. Decision tables are not related to risk level, but rather to complexity level. Decision tables are generated for test items that have complex logic or multiple conditions and actions that need to be tested.

IV. The conditions in the decision table represent negative tests generally. The conditions in the decision table represent both positive and negative tests, depending on whether they are valid or invalid inputs for the test item. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, Chapter 4, page 42-43.

Comprehensive and Detailed In-Depth Explanation:Exhaustive testing (testing all input combinations) is practically impossible except in trivial cases (C). Instead, testers focus on risk-based, prioritized, and efficient test techniques. The seven principles of testing in the ISTQB syllabus highlight that exhaustive testing is infeasible, and therefore, techniques such as equivalence partitioning, boundary value analysis, and risk-based testing are used to optimize test coverage.

Option D correctly explains what is represented by the lines A, B and the axes X, Y in a testing metrics chart. According to option D:

X-axis represents Time

Y-axis represents Count

Line A represents Number of open bugs

Line B represents Total number of executed tests

This information is essential in understanding and analyzing the testing metrics of a completed project.

References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Section 2.5.1, Page 35.

Risk level is determined by the combination of two factors: the likelihood of an event occurring and the impact or harm that could result from that event. This approach allows risks to be prioritized based on their potential effect on the project or system. The likelihood represents the probability of the risk event occurring, while the impact represents the severity of the consequences if the event does happen. This concept is fundamental in risk-based testing and helps guide decision-making during the testing process.References:

ISTQB Certified Tester Foundation Level Syllabus v4.0, Section 1.4.1.

Comprehensive and Detailed In-Depth Explanation:Boundary Value Analysis (BVA)focuses on test cases at the edges of partitions because defects often occur at boundaries. The temperature ranges are:

≤7 (Too cold → W)

[8-21] (Standstill → X)

[22-29] (Ideal → Y)

≥30 (Too hot → Z)

Atwo-point BVAmeans testing both thelower and upper boundary valuesof each partition.The correct selection{7,8,21,22,29,30}includes:

7 → Boundary of Too Cold (W)

8 → Lower boundary of Standstill (X)

21 → Upper boundary of Standstill (X)

22 → Lower boundary of Ideal (Y)

29 → Upper boundary of Ideal (Y)

30 → Lower boundary of Too Hot (Z)

This ensures maximum boundary coverage.

Static testing involves reviewing and inspecting the code, requirements, or design documents without executing the code. It can prevent defects, is effective early in the software development life cycle, and can help eliminate defects in user stories.

Option 1: "It can prevent defects by manual examination of the functional specification" - This is a value of static testing.

Option 2: "It is effective since it can be performed very early in the software development life cycle" - This is a value of static testing.

Option 3: "It can detect the failures in the running application" - This is a v​(ISTQB not-for-profit association)​namic testing, not static testing.

Option 4: "It can help eliminate defects in user stories" - This is a value of static testing.

Option 5: "It can verify externally visible behaviors" - This is a value of dynamic testing, not static testing.

Therefore, the correct set of statements representing values only for static testing is1, 2, 4, which corresponds to answerC【6†source】.

References:

Certified Tester Foundation Level v4.0

ISTQB Foundation Level Syllabus 4.0(2023)

Experience-based test techniques are test design techniques that rely on the experience, knowledge, intuition, and creativity of the testers to identify and execute test cases that are likely to find defects in the software system. Experience-based test techniques are often useful to detect hidden defects that have not been targeted by black-box test techniques, which are test design techniques that use the external behavior and specifications of the software system as the test basis, without considering its internal structure or implementation. Experience-based test techniques can complement black-box test techniques by covering aspects that are not explicitly specified, such as usability, security, reliability, performance, etc. The other statements are false, because:

Experience-based test techniques do not rely on the experience of testers to identify the root causes of defects found by black-box test techniques, but rather to identify the potential sources of defects based on their own insights, heuristics, or exploratory testing. The root causes of defects are usually identified by debugging or root cause analysis, which are activities that involve examining the code or the development process to find and fix the errors that led to the defects.

Some of the most common test basis used by white-box test techniques include the source code, the design documents, the architecture diagrams, and the control flow graphs of the software system. White-box test techniques are test design techniques that use the internal structure and implementation of the software system as the test basis, and aim to achieve a certain level of test coverage based on the code elements, such as statements, branches, paths, etc. User stories, use cases, and business processes are examples of test basis used by black-box test techniques, as they describe the functional and non-functional requirements of the software system from the perspective of the users or the stakeholders.

The primary goal of experience-based test techniques is not to design test cases that can be easily automated using a GUI-based test automation tool, but rather to design test cases that can reveal defects that are not easily detected by other test techniques, such as boundary value analysis, equivalence partitioning, state transition testing, etc. Test automation is the use of software tools to execute test cases and compare actual results with expected results, without humanintervention. Test automation can be applied to different types of test techniques, depending on the test objectives, the test levels, the test tools, and the test resources. However, test automation is not always feasible or beneficial, especially for test cases that require human judgment, creativity, or exploration, such as those designed by experience-based test techniques. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.2.1, Black-box Test Design Techniques

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.2.2, White-box Test Design Techniques

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.2.3, Experience-based Test Design Techniques

ISTQB® Glossary of Testing Terms v4.0, Experience-based Test Technique, Black-box Test Technique, White-box Test Technique, Test Basis, Test Coverage, Test Automation

Good traceability between the test basis and test work products provides several advantages: i.Analyzing the impact of changes:Traceability allows for easy identification of which parts of the test work products will be affected by changes in the requirements or design, facilitating impact analysis. iv.Making testing auditable:Traceability ensures that there is a clear connection between the requirements and the test cases, which makes the testing process auditable and provides evidence that all requirements have been tested​​.

Comprehensive and Detailed In-Depth Explanation:Test automationimproves efficiency and accuracy, butit does NOT eliminate manual testing (D).

(A) is correctbecause automationspeeds up execution.

(B) is correctas automated tests produceconsistent and unbiased results.

(C) is correctbecause automationreduces human errors in repetitive tests.

However,manual testing remains essential for exploratory testing, usability testing, and complex test scenarios.

Pair reviews are informal and typically involve two people reviewing the work product together, often in an informal setting. Walkthroughs are more formal and aim to educate stakeholders and evaluate the product, serving the dual purpose of improving the product and training participants. Technical reviews have a strong focus on improving the product's quality, often involving technical stakeholders. Inspections are the most formal review type and are aimed primarily at detecting defects.References:ISTQB Certified Tester Foundation Level Syllabus v4.0, Section 3.2.3 "Review Types".

Comprehensive and Detailed In-Depth Explanation:Testing and debugging are separate but related activities. Testing executes the software to identify failures that result from defects (A). Debugging is the developer's responsibility and involves finding the cause of a failure (defect), analyzing it, and fixing the defect. The ISTQB syllabus explicitly differentiates these activities. Testing does not modify the software, whereas debugging does.

In software testing terminology, a failure is an observable deviation of the software from its expected behavior. A defect (or bug) is the cause of the failure in the software's code. In this case, the observed slowdown is the failure, while the underlying memory leak in the application code is the defect causing this failure. This distinction is clearly outlined in the ISTQB CTFL Syllabus v4.0, which differentiates between failures (observable issues) and defects (underlying issues in the code)​​.

Comprehensive and Detailed In-Depth Explanation:A defect report should contain relevant details to help developersreproduce and fix the defect efficiently. The essential elements include:

Test object & environment (A)– To ensure reproducibility.

Title & summary (B)– For quick identification.

Expected vs. actual results (D)– To describe the discrepancy.

Thestructure of the test team (C)is irrelevant for defect tracking and resolution.