Juniper JN0-452 Practice Test Questions Answers

Referring to the exhibit and considering that it is in the USA, the WLAN with SSID Eero1234 is not configured to industry best practices while the WLAN with SSID NETGEAR24 is configured to industry best practices.

In Juniper Networks Mist AI Wireless, the behavior described in this scenario is explained by dynamic rate shifting. Dynamic rate shifting is the mechanism by which a wireless client and access point automatically adjust the modulation and coding scheme (MCS) based on current RF conditions to maintain a reliable connection.

When a client is close to an access point, RF conditions are optimal—high RSSI, high signal-to-noise ratio (SNR), and low error rates—allowing the client to use higher-order modulation schemes such as 1024-QAM (in 802.11ax). These modulation schemes deliver higher throughput but require very clean RF conditions. As the client moves farther away from the AP, signal strength decreases and noise becomes more impactful, increasing frame errors and retransmissions.

Dynamic rate shifting continuously evaluates transmission success, retry rates, and acknowledgments. When errors increase, the client steps down to lower modulation rates (for example, from 1024-QAM to 256-QAM or 64-QAM) that are more resilient to reduced signal quality. This trade-off sacrifices peak throughput in favor of connection stability and reliability.

The other options describe contributing factors, but not the mechanism itself:

RSSI indicates signal strength but does not control rate selection.

SNR influences modulation decisions but is not the adaptive process.

Free space path loss explains why signal weakens over distance but does not describe how rates are adjusted.

Mist AI Wireless monitors modulation rates, retries, and throughput via advanced telemetry and uses this data in Wireless Assurance SLEs to highlight RF and performance issues. However, the actual process of stepping up or down transmission rates in response to changing RF conditions is governed by dynamic rate shifting.

Therefore, the correct answer is C. Dynamic rate shifting.

Once a client discovers an access point, the correct order of steps for successful 802.1X authentication is Open System Authentication -> Association -> 802.1X Authentication. So the correct answer is D.Open System Authentication -> Association -> 802.1X Authentication.

In the Juniper Mist AI product portfolio, the BT11 is a specialized, enterprise-grade access point designed exclusively for Bluetooth Low Energy (BLE).4 Unlike the other access points in the Juniper Mist family (such as the AP12, AP24, and AP34), the BT11 does not contain Wi-Fi radios.5 Its sole purpose is to provide high-accuracy, enterprise-grade location-based services (LBS) by leveraging Juniper's patented 16-element virtual BLE (vBLE) antenna array.6

The primary use case for the BT11 is to augment BLE coverage in environments where Wi-Fi connectivity is already established by other APs, but the density of those APs is insufficient for precise location services. For applications like turn-by-turn wayfinding or asset tracking, the RF requirements for BLE are often more stringent than those for Wi-Fi. A facility might have enough Wi-Fi APs to provide data coverage, but may have "location holes" where the BLE signals are too sparse for 1–3 meter accuracy. By deploying BT11 units in these gaps, administrators can extend the reach of the location engine without the expense of adding full-featured Wi-Fi radios where additional capacity is not needed.7

The BT11 communicates directly with the Mist Cloud to manage virtual beacons, which eliminate the need for physical, battery-powered beacons and manual calibration.8 Because it runs on Power over Ethernet (PoE) and integrates seamlessly with the Mist AI engine, it provides a scalable and cost-effective way to ensure continuous, high-fidelity BLE coverage across a campus, hospital, or retail floor.