Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

830-01 Riverbed RCPE Certified Professional WAN Optimization Free Practice Exam Questions (2025 Updated)

Prepare effectively for your Riverbed 830-01 RCPE Certified Professional WAN Optimization certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Riverbed 830-01 Premium Access     Download Demo    
Page: 2 / 6
Total 402 questions

RiOS v7.0 and later the Steelhead Appliance can use HTTP stream splitting to optimize two different live video technologies: (Select 2)

A.

Microsoft Silverlight.

B.

Adobe HTTP Dynamic Streaming.

C.

Youtube.com video.

D.

Adobe Flash.

SH10 and SH11 are connection forwarding neighbors. After a configuration change on SH11, SH10 is in "degraded" status. What is the possible cause? (Select 2)

A.

The optimization services on SH11 are not running.

B.

The connection forwarding keepalive cable was disconnected.

C.

The optimization services on SH10 are not running.

D.

Connection forwarding is disabled on SH11.

In a Steelhead appliance deployment, the customer decides to use Full Transparency and block all incoming/outgoing TCP connections on port 7800 on their firewall. However, they are finding all TCP connections are passing through the Steelhead appliances (even ones that should be optimized via the in-path rule set).

If Full Transparency uses the original IP addresses and TCP ports for inner connections, what is the most likely cause of all TCP connections passing through the Steelhead appliances?

A.

The OOB (out-of-band) splice connection cannot be made

B.

The user connections (if using the same ephemeral TCP port) are blocking each other, since the Steelhead appliance had to make all of these sequentially

C.

Full Transparency is only supported on Steelhead 3U appliances

D.

All connections are being blocked by the firewall

In configuring failover settings, which of the following ports is set as the default for communicating with the backup Steelhead appliance?

A.

7600

B.

7744

C.

7766

D.

7820

E.

7850

Which of the following interfaces should be used for datastore synchronization? (Select 2)

A.

inpath0_0

B.

inpath0_1

C.

Primary

D.

AUX

What is the process for dropping the connection of an individual user that is currently being optimized? As an example, consider an HTTP connection being optimized with a local address of 192.168.5.10 and remote address of 192.168.5.90. (Select 2)

A.

From the GUI, under Connections, select the connection and click on the Reset button

B.

From the GUI, under Connections, select the connection and click on the Drop button

C.

From the CLI: tcp connection send reset local-only local-addr 192.168.5.10:9999 remote-addr 192.168.5.90:80

D.

From the CLI: tcp connection send reset remote-only local-addr 192.168.5.10 local-port 7800 remote-addr 192.168.5.90 remote-port 80

E.

From CLI: tcp reset user 192.168.5.10

When deploying Interceptor appliances in a parallel cluster what feature must be disabled to ensure packet redirection upon failure?

A.

Fail-to-wire.

B.

Connection forwarding.

C.

Fail-to-block.

D.

Link State Propagation.

E.

WCCP.

Which of the following are valid QoS priority queues for Steelhead appliances? (Select 3)

A.

Normal

B.

Medium

C.

Real-time

D.

Low

E.

Critical

VSP on the Steelhead EX supports which features of VMware virtual machines? (Select 3)

A.

vSphere Fault Tolerance

B.

Reporting.

C.

Stopping, starting, and restarting virtual machines through vSphere.

D.

vSphere High Availability

E.

vSphere vMotion.

F.

Virtual machine configuration through vSphere.

Refer to the exhibit.

Assume that a packet being optimized by SH10 incorrectly ends up on SH11 (due to load balancing error, or similar). How can you ensure that this packet is correctly returned to SH10?

A.

Set the WCCP weight of SH10 to be higher than that of SH11

B.

Use fixed-target rules explicitly at SH12 to peer to SH10

C.

Enable destination IP hash and destination port hash

D.

Enable destination IP hash and source port hash

E.

Enable destination IP hash and source IP hash

F.

Enable Connection Forwarding

A parallel SteelHead deployment between datacenters is being discussed by a customer and an Integrator. The customer would like to configure connection forwarding between the SteelHeads in two datacenters with 20 ms RTT between them. What would be the possible outcome, if the nearest branch SteelHead is 40 ms away?

A.

The latency between the Neighbor SteelHeads will mean that Connection Forwarding will not come up.

B.

All asymmetrically routed traffic will suffer from increased latency from the nearer branches.

C.

The Nagle algorithm timer can be adjusted so as to mitigate the symptoms from the closer branches.

D.

There will be little or no impact as it only affects the initial connection.

E.

Suboptimal performance only from HTTP traffic due to increased connection times.

A SteelHead blocks all traffic when the appliance is powered off. What reasons could cause this behavior? (Choose two.)

A.

This behavior is by design.

B.

Router, switch and SteelHead interfaces have auto MDI/MDIX but incorrect cables have been used.

C.

Fail-to-block is enabled.

D.

The bypass NIC battery has failed.

E.

Router, switch and SteelHead interfaces are hard coded and incorrect cables have been used.

Consider a SteelHead deployment with SMB optimization and SMB signing enabled on all SteelHeads. The client is configured to have signing enabled and the server has signing disabled. What will happen to SMB connections between these two hosts?

A.

The connection will be unsigned but allowed. The SteelHead does not need to have SMB signing enabled to accommodate this connection.

B.

The connection will not be allowed, as signing is enabled on the client and disabled on the server.

C.

The connection will be allowed and will be signed as the client determines whether SMB signing is used or not.

D.

The connection will be allowed, and will be signed between the client and client-side SteelHead.

You wish to utilize a SteelHead to fill a high bandwidth, high latency WAN link without data reduction. The link is 622mbps and 500ms latency. What steps should you take to fill the pipe?

A.

Enable HSTCP, configure the WAN buffers and enable SDR/LZ.

B.

Enable HSTCP, configure the WAN buffers and disable SDR/LZ.

C.

Max-TCP and HS-TCP are only for optimized flows, so data reduction cannot be disabled but will fill the pipe anyway.

D.

Enable MXTCP, configure the WAN buffers and disable SDR/LZ.

E.

Enable MXTCP, configure the WAN buffers and enable SDR/LZ.

When optimizing applications that open many short-lived HTTP connections, which operating mode will give the best performance?

A.

Full Transparency

B.

Full Transparency with reset

C.

Correct Addressing

D.

Port Transparency

E.

Any of the above, because performance is not affected by these

When configuring encrypted Lotus Notes optimization and the standard port is configured to require encryption, which of the following is true?

A.

An alternate unencrypted port must be open on the server, and a copy of the server ID file must be imported to the server side SteelHead.

B.

An alternate unencrypted port must be open on the server, and a proxy server ID file must be created on the server-side SteelHead.

C.

An encrypted port must be open on the server, and a proxy server ID file must be created on the server-side SteelHead.

D.

An encrypted port must be open on the server, and a copy of the server ID file must be imported to the server-side SteelHead.

You are using TCPdumps on the server-side SteelHead to troubleshoot an application connectivity issue. The following filter is used on the TCPdump:

(host and host ) or (host and host ) or (proto gre and ((ip[40:4] =

and

ip[44:4] = ) or (ip[40:4] = and ip[44:4] = )) or (port 7850)

What part of the filter captures the traffic which the Interceptor has applied NAT to?

A.

(ip[40:4] = and ip[44:4] = )

B.

(host and host )

C.

(proto gre and ((ip[40:4] = and ip[44:4] = )

D.

(host and host )

Which option below best describes the WCCP redirection supported by a SteelHead?

A.

Ports Mode

B.

GRE only

C.

PBR

D.

GRE or L2

E.

L2 only

What type of problem does the error message below indicate:

Aug 30 18:19:27 SH pm[18716]: [pm.ERR]: Output from sport:

/opt/rbt/bin/sport (pid 11304) received signal 6 (SIGABRT) dumping core

A.

It is not a problem, but part of the regular operation

B.

The management process crashed

C.

The optimization process crashed

D.

The management process received permission to connect to a Granite Core device

E.

The sport process received permission to connect to a Granite Core device

Citrix remote applications, running on the server and to access printers and disk drives, are not performing well. What can you configure to improve the performance?

A.

Enable Citrix CDM optimization.

B.

Enable SecureICA encryption.

C.

Session Reliability (CGP) Port.

D.

Enable Citrix Traffic Fallback Behavior.

Riverbed 830-01 Premium Access     Download Demo    
Page: 2 / 6
Total 402 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved