Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

830-01 Riverbed RCPE Certified Professional WAN Optimization Free Practice Exam Questions (2025 Updated)

Prepare effectively for your Riverbed 830-01 RCPE Certified Professional WAN Optimization certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Page: 5 / 6
Total 402 questions

What are the possible ways to downgrade a Virtual Steelhead appliance after it has been upgraded?

A.

Remove the upgrade license and restart the virtual Steelhead appliance

B.

Reinstall the original model license

C.

Reduce the amount of CPU and RAM allocated to the Virtual Steelhead appliance and it will automatically downgrade at the next startup

D.

It is not possible to downgrade after an upgrade

When using SSL, what is the purpose of peer authentication?

A.

Register peers

B.

Confirm the identity of the peer

C.

Establish sessions

D.

Verify the user permissions

E.

Authenticate the client to the server

Refer to the exhibit.

If Steelhead Mobile Client B offers up a share on the network, what is needed on Steelhead Mobile Client R to open an optimized connection to this share if enhanced auto-discovery is enabled on all Steelhead appliances?

A.

Default auto-discovery will work fine without modification

B.

The connection to Client B cannot be optimized because the Steelhead Mobile Controller cannot optimize incoming connections

C.

A fixed-target rule to Client B's IP address is needed in order for optimization to occur on Mobile Client B

D.

The addition of a peering rule

Peer affinity is most closely related to:

A.

Parallel Interceptor redirection based on Sport ID and client IP

B.

Serial Interceptor redirection based on Sport ID to server

C.

Segstore ID Steelhead mapping based on Sport ID of Steelhead appliances

D.

The shipyard from which Riverbed is most likely to ship Interceptors

Can you optimize FTP using Steelhead Mobile?

A.

Yes, this is possible on all FTP modes

B.

When using active FTP

C.

When using passive FTP

D.

It is not possible to optimize FTP traffic

E.

Only when there is no firewall enabled

The Group ID (GID) links which two policies? (Select 2)

A.

Optimization

B.

Acceleration

C.

Installation

D.

Endpoint

E.

Assignment

What type of configuration must be used on a Steelhead appliance in order to communicate with an Interceptor appliance?

A.

In-path

B.

Out-of-path

C.

Logical in-path

D.

Physical in-path Hybrid Mode

What ports are required for proper operation of the Steelhead Mobile client?

A.

7800 outbound, 7801 inbound, 7870 outbound

B.

7800 inbound, 7870 inbound, 7870 outbound

C.

7800 inbound, 7801 outbound, 7870 outbound

D.

None of the above

A data center location has three Steelhead appliances and one Interceptor appliance clustered together. If Steelheads A and B are unable to handle the new web traffic on port 80, the administrator does not want the connection to be serviced by Steelhead C. Given the current rules, we want to prevent traffic from redirecting to Steelhead C.

Current Rules:

Rule 1: Redirect rule for ports 445, 139, 80, target SH A

Rule 2: Redirect rule for ports 8080, 80, target SH B

Auto (default rule)

Which rule should be added on the Interceptor to achieve desired functionality?

A.

A new rule 1 for ports 80 for Steelhead A and B

B.

New rule 3: Pass-through rule for port 80

C.

Rule 3: Redirect for port 80 to Steelhead C

D.

No new rule needed for the administrator's policy

E.

New rule 1: Pass-through rule for port 80

Three Steelhead appliances SH1, SH2, and SH3 are deployed as shown in the exhibit. They are all using the default auto-discovery rule for optimization. However, CLIENT99 experiences a failure when attempting to access either the HTTP or FTP service on SERVER88. CLIENT99 was able to access these services prior to the deployment of the three Steelhead appliances.

Which of the following choices would most likely correct the problem?

A.

Remove SH2. Use only SH1 and SH3.

B.

Remove SH1. Use only SH2 and SH3.

C.

Turn on Connection Forwarding between SH1 and SH2

D.

Turn on Connection Forwarding between SH1 and SH3

E.

Turn on Connection Forwarding between SH2 and SH3

Which of the following are configurable in the CMC appliance Jump-Start Wizard? (Select 4)

A.

IP address

B.

Netmask

C.

Steelhead appliance model number

D.

Default gateway

E.

Administrator password

When utilizing MAPI prepopulation, the default timer is set to:

A.

96 hours

B.

1 hour

C.

30 minutes

D.

There is no default timer

The default setting for “allow failure” in the Interceptor appliance version 2.0 is: (Select 2)

A.

Is configurable

B.

Is not configurable

C.

Enabled by default

D.

Disabled by default

Refer to the exhibit.

A user from one of your branch offices reports connections to servers are failing after a new deployment. The exhibit shows how the Steelhead appliances have been deployed. Which of the following will most likely fix the issue? (Select 2)

A.

Fixed-target rule is needed on the client-side Steelhead appliance

B.

Change the WCCP to use Redirect Out instead of Redirect In

C.

Remove Redirect-IN from the LAN at the Branch Office

D.

Add Redirect-IN on the WAN at the HQ

E.

Remove fixed-target rule from the server-side Steelhead appliance

The port used by the Steelhead appliance for datastore synchronizations is:

A.

7801

B.

7810

C.

7744

D.

7850

The Optimization service has been disabled on a Steelhead appliance. Which of the following events occur as a result?

A.

LAN and WAN interfaces stop intercepting

B.

Primary interface becomes disabled

C.

AUX interface becomes disabled

D.

The Steelhead appliance reboots

While looking at the Current Connections page on a client-side Steelhead, you noticed that there is more CIFS traffic on the WAN than on the LAN for some connections. What may be the problem?

1) The source data is compressed or encrypted

2) File server not located on the same subnet as the server-side Steelhead

3) The Steelhead is counting both CIFS optimized and unoptimized traffic

4) CIFS read-ahead

5) CIFS write-behind

A.

1, 4

B.

4, 5

C.

1, 2, 3

D.

1, 2, 5

E.

3, 5

What are the four types of policies on a CMC appliance?

A.

Networking, Optimization, Software, System

B.

Networking, Optimization, Rules, System

C.

Networking, Optimization, Security, System

D.

Networking, Acceleration, Security, System

Which of the following commands would allow you to generate a system dump from the CLI?

A.

sysdump

B.

dump generate

C.

debug generate dump

D.

sysdump generate dump

E.

dump generate –w filename

When upgrading a Steelhead appliance from the CMC appliance what methodologies can be used? (Select 2)

A.

Upgrade from uploaded image

B.

Upgrade from the CMC appliance flash

C.

Automatic download from support.riverbed.com

D.

Upgrade from URL

E.

Upgrade from TFTP server

Page: 5 / 6
Total 402 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved