CTFL_Syll_4.0 iSQI ISTQB Certified Tester Foundation Level (CTFL) v4.0 Free Practice Exam Questions (2025 Updated)

The document that describes the test procedures, including the order in which test cases are to be executed according to dependencies described by preconditions and postconditions, is typically produced during the test implementation phase. During this phase, detailed test procedures and scripts are developed, organized, and prioritized for execution. The main goal of test implementation is to ensure that all test cases are prepared and structured in a way that supports efficient and effective test execution.

This answer is correct because a walkthrough is a type of review where the author of the work product leads the review process and explains the work product to the reviewers. The reviewers are not required to prepare for the review in advance, and the main objective of the walkthrough is to establish a common understanding of the work product and to identify any major defects or issues. A walkthrough is usually informal and does not follow a defined process or roles. In this case, the review for a high-level architectural document written by a software architect matches the characteristics of a walkthrough. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.4.2.2

Error guessing is a testing technique where experienced testers anticipate potential defects based on their knowledge of the application and past experiences. Fault attacks, which involve focusing on areas where defects are likely to occur based on previous failures, are a practical implementation of error guessing.

Black-box testing techniques focus ontesting the functionality of the software without knowledge of its internal workings(D). They derive test cases fromspecifications, requirements, or expected behavior.Option Adescribes exploratory testing,Bcontradicts the definition by focusing on implementation, andCincorrectly includes "implied behavior," which is not a core characteristic of black-box testing.

Configuration management (B)ensures thatversions of software and test artifactsare properly tracked, stored, and retrievable. It allows teams to:

Restoreearlier versions of software and test work products

Maintaintraceability between requirements, tests, and code

Avoid discrepancies due tomismanaged versions

(A) is incorrectbecause defect managementtracks issues but does not restore versions.

(C) is incorrectbecause change managementcontrols changes but does not track past versions.

(D) is incorrectbecause risk managementassesses risks but does not manage software versions.

Effective configuration management ensures the ability to roll back changesand maintain system stability.

A static analysis tool is best suited for determining source code compliance with the guidelines provided by a coding standard. Static analysis tools analyze code without executing it, checking for adherence to coding standards, potential errors, and code quality issues. They are designed to detect deviations from predefined coding standards and ensure that the code conforms to best practices and guidelines.

Boundary Value Analysis (BVA)focuses on test cases at the edges of partitions because defects often occur at boundaries. The temperature ranges are:

≤7 (Too cold → W)

[8-21] (Standstill → X)

[22-29] (Ideal → Y)

≥30 (Too hot → Z)

Atwo-point BVAmeans testing both thelower and upper boundary valuesof each partition.

The correct selection{7,8,21,22,29,30}includes:

7 → Boundary of Too Cold (W)

8 → Lower boundary of Standstill (X)

21 → Upper boundary of Standstill (X)

22 → Lower boundary of Ideal (Y)

29 → Upper boundary of Ideal (Y)

30 → Lower boundary of Too Hot (Z)

This ensures maximum boundary coverage.

The support offered by a performance testing tool is often leveraged by testers to run load tests, which are tests that simulate a large number of concurrent users or transactions on the system under test, in order to measure its performance, reliability, and scalability. Performance testing tools can help testers to generate realistic workloads, monitor system behavior, collect and analyze performance metrics, and identify performance bottlenecks. The other statements are false, because:

A test data preparation tool is a tool that helps testers to create, manage, and manipulate test data, which are the inputs and outputs of test cases. Test data preparation tools are not directly related to running automated regression test suites, which are test suites that verify that the system still works as expected after changes or modifications. Regression test suites are usually executed by test execution tools, which are tools that can automatically run test cases and compare actual results with expected results.

A bug prediction tool is a tool that uses machine learning or statistical techniques to predict the likelihood of defects in a software system, based on various factors such as code complexity, code churn, code coverage, code smells, etc. Bug prediction tools are not used by testers to track the bugs they found, which are the actual defects that have been detected and reported duringtesting. Bugs are usually tracked by defect management tools, which are tools that help testers to record, monitor, analyze, and resolve defects.

A continuous integration tool is a tool that enables the integration of code changes from multiple developers into a shared repository, and the execution of automated builds and tests, in order to ensure the quality and consistency of the software system. Continuous integration tools are not used by testers to automatically generate test cases from a model, which are test cases that are derived from a representation of the system under test, such as a state diagram, a decision table, a use case, etc. Test cases can be automatically generated by test design tools, which are tools that support the implementation and maintenance of test cases, based on test design specifications or test models. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 3.4.1, Types of Test Tools

ISTQB® Glossary of Testing Terms v4.0, Performance Testing Tool, Test Data Preparation Tool, Bug Prediction Tool, Continuous Integration Tool, Test Execution Tool, Defect Management Tool, Test Design Tool

This answer is correct because configuration management is a process of establishing and maintaining consistency of a product’s performance, functional, and physical attributes with its requirements, design, and operational information throughout its life. Configuration management helps ensure that all relevant project documentation and software items are uniquely identified in all their versions and therefore can be unambiguously referenced in test documentation. This supports testing by providing traceability, consistency, and control over the test artifacts and the software under test. References: : ISTQB Glossary of Testing Terms v4.0, : ISTQB Foundation Level Syllabus v4.0, Section 2.2.2.2

Exploratory testingis an unscripted approach where testersactively design and execute testsbased on theirintuition, experience, and knowledgeof the system. Atest charter (A)provides a guideline on what areas to explore, defining test objectives but leaving room for dynamic adaptation.

(B), (C), and (D) contradict exploratory testing principles, which focus on freedom rather than rigid documentation.

Exploratory testing is especially useful inagile environments, usability testing, and uncovering unexpected defects.

Experience-based testing techniques are adopted for several reasons, most importantly because they can identify defects that might be missed by more systematic approaches like black-box and white-box testing. While systematic techniques follow predefined procedures and cover specific criteria, experience-based techniques leverage the tester's knowledge, intuition, and experience, which can be especially effective in uncovering subtle and complex issues.

Experience-based testing techniques include methods such as error guessing and exploratory testing. These methods rely on the tester’s background and intuition to predict where defects might be located and how the system might fail. These techniques are particularly useful in situations where the requirements and specifications are incomplete or ambiguous, and where creative and ad-hoc approaches can provide significant value.

According to the description provided, when both systems A and B come back up at the same time, the process should involve a decision about which system should become active. However, the description states that if both systems come up simultaneously, one should become active based on a specific condition or precedence. Generally, in disaster recovery systems, there are protocols to avoid both systems becoming active simultaneously to prevent conflicts. Therefore, the transition where both A and B come back up at the same time and A becomes active while B becomes inactive without any conflict or decision-making step is incorrect​​.

This answer is correct because a typical objective of testing is to ensure that a software has been tested using a combination of test techniques, such as black-box, white-box, or experience-based techniques, that are appropriate for the test objectives, test levels, and test types. Testing using a combination of test techniques can increase the effectiveness and efficiency of testing, as different techniques can target different aspects of the software quality, such as functionality, usability, performance, security, reliability, etc. Testing using a combination of test techniques can also reduce the risk of missing defects that could be detected by one technique but not by another. References: ISTQB Foundation Level Syllabus v4.0, Section 2.3.1.1, Section 2.3.2

Comprehensive and Detailed Explanation From Exact Extract:

This question applies theState Transition Testingtechnique.

Let’s evaluateOption Dstep-by-step:

NORMAL MODE → DEGRADED MODE:✅Valid on“FAILURE DETECTED”

DEGRADED MODE → NORMAL MODE:✅Valid on“ALL FAILURES CLEARED”

NORMAL MODE → DIAGNOSTIC MODE:✅Valid on“SELF DIAGNOSTIC INITIATED”

DIAGNOSTIC MODE → DEGRADED MODE:❌Invalid– there isno defined transitionfrom DIAGNOSTIC MODE directly to DEGRADED MODE.

According to the state diagram, DEGRADED MODE can only be entered:

From NORMAL MODE (on FAILURE DETECTED), or

Not from DIAGNOSTIC MODE at all.

This violates the rule:

“State transition testing uses a model where test cases are designed to execute valid and invalid transitions.”

(ISTQB CTFL Syllabus v4.0, Section 4.2.4 – State Transition Testing, Page 40)

Thus, OptionDcontains aninvalid transition, making it the correct answer.

A test task that usually occurs during test implementation is to make sure the planned test environment is ready to be delivered. The test environment is the hardware and software configuration on which the tests are executed, and it should be as close as possible to the production environment where the software system will operate. The test environment should be planned, prepared, and verified before the test execution, to ensure that the test conditions, the test data, the test tools, and the test interfaces areavailable and functional. The other options are not test tasks that usually occur during test implementation, but rather test tasks that occur during other test activities, such as:

Find, analyze, and remove the causes of the failures highlighted by the tests: This is a test task that usually occurs during test analysis and design, which is the activity of analyzing the test basis, designing the test cases, and identifying the test data. During this activity, the testers can use techniques such as root cause analysis, defect prevention, or defect analysis, to find, analyze, and remove the causes of the failures highlighted by the previous tests, and to prevent or reduce the occurrence of similar failures in the future tests.

Archive the testware for use in future test projects: This is a test task that usually occurs during test closure, which is the activity of finalizing and reporting the test results, evaluating the test process, and identifying the test improvement actions. During this activity, the testers can archive the testware, which are the test artifacts produced during the testing process, such as the test plan, the test cases, the test data, the test results, the defect reports, etc., for use in future test projects, such as regression testing, maintenance testing, or reuse testing.

Gather the metrics that are used to guide the test project: This is a test task that usually occurs during test monitoring and control, which is the activity of tracking and reviewing the test progress, status, and quality, and taking corrective actions when necessary. During this activity, the testers can gather the metrics, which are the measurements of the testing process, such as the test coverage, the defect density, the test effort, the test duration, etc., that are used to guide the test project, such as planning, estimating, scheduling, reporting, or improving the testing process. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.1, Test Planning1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.2, Test Monitoring and Control1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.3, Test Analysis and Design1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.4, Test Implementation1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.5, Test Execution1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.6, Test Closure1

ISTQB® Glossary of Testing Terms v4.0, Test Environment, Test Condition, Test Data, Test Tool, Test Interface, Failure, Root Cause Analysis, Defect Prevention, Defect Analysis, Testware, Regression Testing, Maintenance Testing, Reuse Testing, Test Coverage, Defect Density, Test Effort, Test Duration2

The whole team approach in testing means that the responsibility for testing is shared among all members of the team, not just the testers. This concept is emphasized in agile methodologies where collaboration and collective ownership of quality are key principles. Each team member, including developers, business analysts, and testers, contributes to the testing process, ensuring that quality is built into the product from the beginning.

During the review planning phase of a formal review process, decisions are made regarding which standards and procedures will be followed. This planning ensures that the review process is structured, consistent, and aligned with organizational or project-specific guidelines, thereby enhancing the effectiveness and reliability of the review outcomes.

This answer is correct because the test procedures of all test cases that have been executed are not a typical content of a test completion report for a test project. A test completion report is a document that summarizes the test activities and results at the end of a test project. It usually includes information such as the test objectives, scope, approach, resources, schedule, results, deviations, issues, risks, lessons learned, and recommendations for improvement. The test procedures of all test cases that have been executed are part of the test documentation, but they are not relevant for the test completion report, as they do not provide a high-level overview of the test project outcomes and performance. References: ISTQB Foundation Level Syllabus v4.0, Section 2.5.3.2

A test-first approach involves writing tests before writing the code. In this approach, initially, the tests fail because the corresponding functionality is not yet implemented. Afterward, the code is written or modified to make the tests pass. This cycle is repeated iteratively. This method ensures that the code is developed based on predefined tests and helps in identifying issues early in the development process​​.