156-315.81 Checkpoint Check Point Certified Security Expert R81.20 Free Practice Exam Questions (2025 Updated)

In R81, you can manage your Mobile Access Policy through the Unified Policy. The Unified Policy is a single policy that combines access control, threat prevention, data protection, and identity awareness. You can create rules for mobile access in the Unified Policy rulebase and apply them to mobile devices, users, and applications. You can also use the Mobile Access blade to configure additional settings for mobile access, such as authentication methods, VPN settings, and application portal.

Threat Simulator is not a component of Check Point SandBlast. Check Point SandBlast is a solution that provides advanced protection against zero-day threats using four components: Threat Emulation, Threat Extraction, Threat Cloud, and Threat Prevention. References: Check Point SandBlast Network

The fw tab -s command lists all tables in Gaia. The fw tab command displays information about the firewall tables, such as connections, NAT translations, SAM rules, etc. The -s option shows a summary of all tables. References: fw tab - Check Point Support Center

The CLI command to reset the IPS (Intrusion Prevention System) pattern matcher statistics is option D: ips pmstats reset. This command will reset the statistics related to the IPS pattern matcher.

Options A, B, and C are not the correct syntax for resetting the IPS pattern matcher statistics.

References: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.

The SmartEvent component that creates events is the Correlation Unit, which is responsible for correlating and analyzing security events to identify patterns and potential threats.

Option A, "Consolidation Policy," does not create events but is used to configure policies for event consolidation.

Option C, "SmartEvent Policy," is not responsible for creating events but is used to configure policies related to SmartEvent.

Option D, "SmartEvent GUI," is the graphical user interface for managing SmartEvent but does not create events itself.

References: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.

The fw ctl affinity -l -a -r -v command is the most accurate CLI command to get info about assignment (FW, SND) of all CPUs in your SGW. This command displays the affinity settings of all interfaces and processes in a verbose mode, including the Firewall (FW) and Secure Network Distributor (SND) instances. References: CoreXL Administration Guide

 The process that pulls application monitoring status is cpd. cpd is a daemon that runs on Check Point products and performs various tasks related to management communication, policy installation, license verification, logging, etc. cpd also monitors the status of other processes and applications on the system and reports it to the management server. cpd uses SNMP to collect information from various sources, such as blades, gateways, servers, etc. You can view the application monitoring status in SmartConsole by using the Gateways & Servers tab in the Logs & Monitor view. References: Check Point Processes and Daemons

It is recommended to enable Detect-Only for Troubleshooting on the profile during the initial installation of IPS. This option overrides any protections that are set to Prevent so that they will not block any traffic.

During this time you can analyze the alerts that IPS generates to see how IPS will handle network traffic, while avoiding any impact on the flow of traffic.

References:

CPInfo is an auto-updatable utility that collects diagnostics data on a customer's machine at the time of execution and uploads it to Check Point servers (it replaces the standalone cp_uploader utility for uploading files to Check Point servers).

The CPInfo output file allows analyzing customer setups from a remote location. Check Point support engineers can open the CPInfo file in a demo mode, while viewing actual customer Security Policies and Objects. This allows the in-depth analysis of customer's configuration and environment settings.

References:

 You can select the file types that are sent for emulation for all the Threat Prevention profiles. Each profile defines an Inspect or Bypass action for the file types. The Inspect action means that the file will be sent to the Threat Emulation engine for analysis, and the Bypass action means that the file will not be sent and will be allowed or blocked based on other Threat Prevention blades1. The other options are not valid actions for file types in Threat Prevention profiles. References: Check Point R81 Threat Prevention Administration Guide

The three components for Check Point Capsule are Capsule Workspace, Capsule Docs, and Capsule Cloud. Capsule Workspace is a secure container app that allows users to access corporate data and applications from their mobile devices. Capsule Docs is a solution that protects documents with encryption and granular access control. Capsule Cloud is a cloud-based security service that enforces security policies on devices that are outside the corporate network. References: Check Point Capsule

 Dynamic Dispatcher is a feature that optimizes the performance of Security Gateways with multiple CPU cores by dynamically allocating traffic to different cores based on their load and priority. Firewall Priority Queues is a feature that prioritizes traffic based on its type and importance by assigning it to different queues with different weights and limits. To fully enable Dynamic Dispatcher with Firewall Priority Queues on a Security Gateway, you need to run the following command in Expert mode then reboot:

This command sets the multi-core mode to 9, which means that Dynamic Dispatcher is enabled with Firewall Priority Queues. The other commands are not valid or do not enable both features. References: R81 Performance Tuning Administration Guide

The fwd process within the Security Management Server is responsible for the receiving of log records from Security Gateway. The fwd process handles the communication with the Security Gateways and log servers via TCP port 2571. The other processes have different roles, such as logd for writing logs to the database, fwm for handling GUI clients, and cpd for infrastructure tasks2. References: Check Point Ports Used for Communication by Various Check Point Modules, Check Point Processes Cheat Sheet – LazyAdmins

The command migrate import can be used to restore a backup of Check Point configurations without the OS information. This command imports the configuration from a file that was created using the migrate export command, which backs up only the Check Point configuration and not the OS settings. The other commands are either not valid or not suitable for restoring a backup without the OS information. References: Check Point R81 Installation and Upgrade Guide

To help SmartEvent determine whether events originated internally or externally, you must define the traffic direction using the Initial Settings under General Settings in the Policy Tab. There are four options available to calculate the traffic direction: Incoming, Outgoing, Internal, and Other. Incoming means the source is external and the destination is internal. Outgoing means the source is internal and the destination is external. Internal means both the source and the destination are internal. Other means both the source and the destination are external. References: SmartEvent R81 Administration Guide

 In R81, IPS is managed by the Threat Prevention Policy. The Threat Prevention Policy is a unified policy that allows you to configure and enforce IPS, Anti-Bot, Anti-Virus, Threat Emulation, and Threat Extraction settings in one place. References: Threat Prevention Administration Guide

Wire Mode is a VPN-1 NGX feature that enables VPN connections to successfully fail over, bypassing Security Gateway enforcement. This improves performance and reduces downtime. Based on a trusted source and destination, Wire Mode uses internal interfaces and VPN Communities to maintain a private and secure VPN session, without employing Stateful Inspection. Since Stateful Inspection no longer takes place, dynamic-routing protocols that do not survive state verification in non-Wire Mode configurations can now be deployed. The VPN connection is no different from any other connections along a dedicated wire, thus the meaning of "Wire Mode".

References: VPN Administration Guide

NAT rules are prioritized in the following order:

Automatic Static NAT: This is the highest priority NAT rule and it translates the source or destination IP address to a different IP address without changing the port number. It is configured in the network object properties.

Automatic Hide NAT: This is the second highest priority NAT rule and it translates the source IP address and port number to a different IP address and port number. It is configured in the network object properties.

Manual/Pre-Automatic NAT: This is the third highest priority NAT rule and it allows you to create custom NAT rules that are not possible with automatic NAT. It is configured in the NAT policy rulebase before the automatic NAT rules.

Post-Automatic/Manual NAT rules: This is the lowest priority NAT rule and it allows you to create custom NAT rules that are not possible with automatic NAT. It is configured in the NAT policy rulebase after the automatic NAT rules.

The least amount of CPU cores required to enable CoreXL is 2. CoreXL is a technology that improves the performance of Security Gateways by using multiple CPU cores to process traffic in parallel. CoreXL requires at least two CPU cores, one for SND (Secure Network Distributor) and one for a Firewall instance. The other options are either too few or too many CPU cores for enabling CoreXL. References: [Check Point R81 SecureXL Administration Guide], [Check Point R81 Performance Tuning Administration Guide]

 Session Rate Acceleration is a SecureXL feature that accelerates the establishment of new connections by bypassing the inspection of the first packet of each session. Session Rate Acceleration ignores the source port information of the packet, as well as the destination port ranges, protocol type, and VPN information. The other packet info is used by Packet Acceleration, which is another SecureXL feature that accelerates the forwarding of subsequent packets of an established connection. References: SecureXL Mechanism

The fwd process on the Security Gateway sends logs to the fwd process on the Management Server via the cpm process. The cpm process is the main management process that handles database operations, policy installation, and communication with GUI clients via TCP port 190093. The other options are either incorrect or irrelevant to the log flow. References: Certified Security Expert (CCSE) R81.20 Course Overview, Check Point Ports Used for Communication by Various Check Point Modules

SecureXL Templating is a feature that accelerates the processing of packets that belong to the same connection or session by creating a template for the first packet and applying it to the subsequent packets. SecureXL Templating is precluded by factors that prevent the creation of a template, such as source port ranges, encrypted connections, NAT, QoS, etc. References: SecureXL Mechanism

 The API command add host name ip-address  can be used in a script to create 100 new host objects with different IP addresses. This command adds a new host object with the specified name and IP address to the database. The other commands are either not valid or not suitable for creating new host objects. References: Check Point - Management API reference

The fwaccel stat command displays the status of SecureXL, and its enabled templates and features. The other commands are either incorrect or incomplete. References: [SecureXL Commands]

References:

SmartView is a web-based application that allows you to view and analyze logs, reports, and events from multiple Check Point products. You can access SmartView by using the following URL:

You need to use HTTPS protocol and the default port 443. You also need to enter the IP address of the Security Management Server that hosts the SmartView application. You cannot use the host name of the Security Management Server or a different port number. References: SmartView R81 Administration Guide

The least ideal Synchronization Status for Security Management Server High Availability deployment is Collision. This status indicates that both members have modified the same object independently, resulting in a conflict that needs to be resolved manually. The other statuses are either normal or indicate a temporary delay in synchronization. References: High Availability Administration Guide

An event is a notification that something significant has occurred on a Check Point product or network. Events are generated by various sources, such as blades, gateways, servers, SmartEvent, etc. You can view and manage events in SmartConsole by using the Events tab in the Logs & Monitor view. Selecting an event displays its configurable properties in the Detail pane and a description of the event in the Description pane. The configurable properties include:

Severity: The level of importance or urgency of the event. You can change the severity of an event by selecting a different value from the drop-down list.

Automatic reactions: The actions that are triggered when an event occurs. You can add, edit, or delete automatic reactions for an event by clicking on the + icon or the pencil icon.

Threshold: The minimum number or frequency of occurrences of an event that triggers an automatic reaction. You can change the threshold of an event by entering a different value in the text box.

The policy is not an option to adjust or configure for an event. The policy is a set of rules that define how to handle events based on their source, type, severity, etc. You can create and manage policies in SmartEvent by using the Policies tab in the Logs & Monitor view. References: R81 Logging and Monitoring Administration Guide