Black Friday Speed Sale: Save 75% on Every Exam Bundle! Use coupon code below now! - Ends in 0d 00h 00m 00s - Coupon code: stp75

Easiest Solution 2 Pass Your Certification Exams

350-801 Cisco Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) v2.0 Free Practice Exam Questions (2026 Updated)

Prepare effectively for your Cisco 350-801 Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) v2.0 certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2026, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Page: 2 / 8
Total 489 questions

What is the maximum one-way packet loss and jitter for voice before quality issues arise?

A.

< 10 percent packet loss and < 10 ms jitter

B.

< 1 percent packet loss and < 30 ms jitter

C.

< 9 percent packet loss and < 30 ms jitter

D.

< 3 percent packet loss and < 60 ms jitter

A customer wants a video conference with five Cisco Telepresence 1X5000 Series systems. Which media resource is necessary in the design to fully utilize the immersive functions?

A.

Cisco Webex Meetings Server

B.

software conference bridge on Cisco UCM

C.

Cisco Meeting Server

D.

Cisco PVDM4-128

Users dial a 9 before a 10-digit phone number to make an off-net call All 11 digits are sent to the Cisco Unified Border Element before going out to the PSTN The PSTN provider accepts only 10 digits. Which configuration is needed on the Cisco Unified Border Element for calls to be successful?

A.

voice translation-rule 1 rule 1 /^9/ //

B.

voice translation-rule 1 rule 1 /^9(..........)/ //

C.

voice translation-rule 1 rule 1 /^9.+/ //

D.

voice translation-rule 1 rule 1 /^9........./ //

Which DSCP value must be selected to mark video traffic between two Cisco 8845 phones?

A.

24

B.

32

C.

34

D.

46

An engineer needs to integrate Cisco IJCM with an LDAP server to pull user data from LDAP into Cisco IJCM, The following configurations were already performed in Cisco UCM:

    create an LDAP filter

    Configure LDAP directory sync

    Configure LDAP authentication

However, the integration fails. Which two actions must be performed in Cisco l-JCM to resolve the issue? (Choose two.)

A.

Activate the Tomcat service.

B.

Enable LDAP directory synchronization

C.

Configure the LDAP authorization

D.

Activate the Cisco DirSync service

E.

Configure the LDAP agreement service parameters

An engineer troubleshoots a Cisco Jabber login problem on a Windows PC. The login fails with the error message " Cannot find your services automatically. Click advanced settings to set up manually " Which action should the engineer take first?

A.

Verify whether the cup-xmpp certificates are valid.

B.

Verify the username and password and try again.

C.

Perform a manual DNS lookup of SRV record _cisco-uds._tcp.domain.com.

D.

Perform a manual DNS lookup of SRV record _collab-edge._tls.domain.com.

An engineer is working on a SIP integration between Cisco UCM and Cisco Unity Connection and must add an additional TFTP server Drag and drop the configuration steps from the left into the correct order on the right.

Which configuration concept allows for high-availability on IM and Presence services in a UC environment?

A.

IM and Presence subclusters (configured on Cisco UCM)

B.

Presence Redundancy Groups (configured on Cisco Unified IM and Presence)

C.

IM and Presence subclusters (configured on Cisco Unified IM and Presence)

D.

Presence Redundancy Groups (configured on Cisco UCM)

A collaboration engineer configures Global Dial Plan Replication for multiple Cisco UCM clusters. The local cluster acts as the hub cluster, and the remaining clusters act as spoke clusters Which service must the engineer configure on the local cluster’

A.

Intercluster Lookup Service

B.

Location Conveyance on intercluster SIP trunks

C.

Intra-Cluster Communication Signaling

D.

Mobility Cross Cluster

Refer to the exhibit An engineer is troubleshooting issues with outbound calls after adding a new route pattern on Cisco UCM Which tool will the engineer use to troubleshoot the issue?

A.

Cisco CDR

B.

Cisco CAR

C.

Cisco RTMT

D.

Cisco DNA

Refer to the exhibit. An engineer configures ISDN on a voice gateway. The provider confirms that the PRI is configured with 10 channels the engineer ordered and is working from the provider side, but the engineer cannot get a B-channel to carry voice. The rest of the configuration for the serial interface and voice network is functioning correctly. Which actions must be taken to carry voice?

A.

The engineer must activate the controller card on the voice gateway before configuring the device.

B.

The engineer used a T1 interface but must use an E1 interface.

C.

The pri-group timeslots command must be 0-9 for the 10 channels because all values on a router start with 0.

D.

The engineer must manually revert the order of using the channels.

Which method does Cisco suggest to classify voice media when using voice applications like Webex App?

A.

Configure access control lists and mark traffic with DSCP values

B.

Classify and mark traffic at the core switch

C.

Classify and mark traffic at the access switch

D.

Configure group policy on the VLAN interface

What is a benefit of using DNS in a Cisco collaboration infrastructure?

A.

provides high availability for the collaboration infrastructure

B.

provides certificate-based security

C.

reduces latency for audio and video communications

D.

enables the directory address book in Cisco UCM

Which DSCP value must be used when configuring QoS for call signaling?

A.

DSCP24

B.

DSCP 28

C.

DSCP 32

D.

DSCP 46

Which Webex Suite service facilitates a user that wants to make and receive business calls directly from the Webex application integrating with their organization ' s phone system?

A.

Webex Cdllng

B.

Webex Contact Center

C.

Webex Messaging

D.

Webex Meetings

Refer to the exhibit Users report that they receive a fast, busy signal when they can certain older phone models from their Cisco IP Phone 7821 An engineer checks the call traces and discovers the SDP offer and the error message at the same time as the call failure. What is the cause of the issue?

A.

The called parties are already on an active call.

B.

The called party has configured Cal Forward Al to a blocked number

C.

A codec mismatch causes the voice stream.

D.

The firewall is blocking the voice stream

Refer for lhe exhibit A user reports that all calls are experiencing audio issues based on the show call active voice brief command output Which two statements are correct? (Choose two.)

A.

The source RTP port advertised by 192.0.2.200 is invalid

B.

No RTP stream is being received from endpoint with an IP address of 192.0.2.200

C.

From the perspective of CUBE, the call is experiencing one way audio

D.

The source RTP port advertised by 192 0 2 100 is invalid

E.

No RTP stream is being received from endpoint with an IP address of 192.0.2.100

An engineer with ID0123456789 is designing a new dial plan for a customer that has offices in several countries on four continents around the world. This client also wants to integrate with a Microsoft Lync backend. Which dial plan type does the engineer recommend?

A.

H.323

B.

SIP URI

C.

E.164

D.

TEHO

Refer to the Exhibit.

Which command is required to allow this media resource to handle Video Media streams?

A.

maximum sessions hardware 50

B.

video codec h264

C.

codec pass-through

D.

associate application Cisco unified border element

An engineer must configure a SIP integration between cisco UCM and cisco Unity Connection. These components are configured already:

Drag and drop the components from the left into the order they must be configured on the right.

Page: 2 / 8
Total 489 questions
Copyright © 2014-2026 Solution2Pass. All Rights Reserved