Summer Sale Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: s2p65

Easiest Solution 2 Pass Your Certification Exams

350-801 Cisco Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) Free Practice Exam Questions (2025 Updated)

Prepare effectively for your Cisco 350-801 Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Page: 1 / 6
Total 361 questions

Which Cisco UCM configuration is required for SIP MWI integrations?

A.

Enable "Accept presence subscription" on the SIP Trunk Security Profile.

B.

Select "Redirecting Diversion Header Delivery - Outbound" on the SIP trunk.

C.

Enable "Accept unsolicited notification" on the SIP Trunk Security Profile.

D.

Select "Redirecting Diversion Header Delivery - Inbound" on the SIP trunk.

An engineer is asked to implement on-net/off-net call classification in Cisco UCM. Which two components are required to implement this configuration? (Choose two.)

A.

CTI route point

B.

SIP route patterns

C.

route group

D.

route pattern

E.

SIP trunk

An engineer deploys a Cisco Expressway-E server for a customer who wants to utilize all features on the server. Which feature does the engineer configure on the Expressway-E?

A.

H.323 endpoint registrations

B.

Mobile and Remote Access

C.

SIP gateway for PSTN providers

D.

VTC bridge

End users report bad video quality and voice choppiness on Cisco Collaboration endpoints. The engineer changed the device pool the users were in but did not correct the problem. Which action should be taken to troubleshoot this issue?

A.

Use direct IP address calls between two endpoints to troubleshoot call quality issues.

B.

Restart the Cisco Location Bandwidth Manager service on the Cisco UCM publisher.

C.

Check for duplex/speed mismatches between the network port settings of the system and network switch.

D.

Set the service parameter Use Video Bandwidth Pool for Immersive Video Calls to "false".

Refer to the exhibit An engineer is troubleshooting codec negotiation between two Cisco phones in different branch offices that connect over a WAN Which codec is used for the call?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

What is required for Cisco UCM to accept SIP calls with a URI in the format of 'sip:2001@cucmpub.cisco.com'?

A.

Define Cluster Fully Qualified Domain Name under Servers in Cisco UCM.

B.

Change the Destination Address to a Fully Qualified Domain Name on the SIP trunk.

C.

Define Cluster Fully Qualified Domain Name in Enterprise Parameters.

D.

Set the SIPS URI Handling to True in CallManager Service Parameters.

An administrator uses the Cisco Unified Real-Time Monitoring Tool to investigate recent calls on a Cisco UCM cluster. The SIP trace for an on-net. direct-media call shows two 180 Ringing and two 11 BYE messages. Why are there multiples of each message type in the trace?

A.

The source phone sends a 180 Ringing signal to the Cisco UCM. which sends a 180 Ringing signal to the destination phone. The same process applies to 11 BYE messages.

B.

The source phone must signal to the destination phone that it is ringing, and the destination phone signals back with a 180 Ringing message. The same process applies to 11 BYE messages.

C.

The calls have an MTP in the call path due to different codec support. The calls are subsequently split into two call legs.

D.

The destination phone signals back to the Cisco UCM that it is ringing, and the Cisco UCM signals back to the source phone.

What are two Cisco UCM location bandwidths that are deducted when G 729 and G.711 codecs are used? (Choose two.)

A.

If a call uses G.729. Cisco UCM subtracts 16k.

B.

If a call uses G.711, Cisco UCM subtracts 64k

C.

If a call uses G.711, Cisco UCM subtracts 80k

D.

If a call uses G.729. Cisco UCM subtracts 24k.

E.

If a call uses G.729. Cisco UCM subtracts 40k

What is the traffic classification for voice and video conferencing?

A.

Voice is classified as CoS 4, and video conferencing is CoS 5.

B.

Voice and video conferencing are both classified is CoS 3.

C.

Voice is classified as CoS 5, and video conferencing is CoS 4.

D.

Video conferencing is classified as CoS 1, and voice is CoS 2.

What is the purpose of Mobile and Remote Access with Cisco Jabber in the cisco UCM?

A.

to allow Cisco Jabber to register with Cisco UCM without trie use of a VPN from outside the corporate network

B.

to allow Cisco Jabber to register with Cisco UCM via a remote access VPN from a branch office

C.

to allow Cisco Jabber to register with Cisco UCM via a remote access VPN from outside the corporate network

D.

to allow Cisco Jabber to register with Cisco UCM via a site-to-srte VPN from a branch office

Refer to the exhibit. An administrator is asked to allow new phones to use self-provisioning Interactive Voice Response. Which change to the Universal Device Template implements this feature?

A.

Configure Idle URL with default.

B.

Configure Authentication Server URL to the authentication server.

C.

Configure the Directory URL to a valid directory.

D.

Configure Secure Information URL to info URL.

Which Webex Calling dial plan settings restrict a user from placing a particular outbound call type?

A.

Block

B.

Transfer to Number

C.

Reject

D.

Restrict

Which QoS marking is used when an administrator configures voice call signaling?

A.

AF41

B.

CS3

C.

CS4

D.

EF

A Cisco voice gateway is configured to use a sip-kpml DTMF relay in global settings. A new SIP dial peer is configured for a third-party application that only supports an in-band DTMF relay. Which commands must an engineer run on the dial peer?

A.

dtmf-relay sip-info

B.

dtmf-relay sip-notify

C.

dtmf-relay rtp-net

D.

no dtmf-relay sip-kpml

What is a description of the DiffServ model used for implementing QoS?

A.

AF41 has higher drop precedence than AF42. which has higher drop precedence than AF43.

B.

Voice and video calls are marked with different DSCP values and placed in different queues.

C.

AF43 has higher drop precedence than AF42 but lower drop precedence than AF41.

D.

RTP traffic from voice and video calls is marked EF and placed in the same queue.

Refer to the exhibit. Which route pattern can the Cisco UCM administrator apply to the configuration to allow calls to "1306.1316.1326,13*6.13#6” only?

A.

13XX

B.

13[25-8]6

C.

13!#

D.

13[A3-9)6

Which Cisco Unity Connection call management element can be used to answer calls, provide callers with a list of menu options, and transfer calls?

A.

directory handler

B.

call routing table

C.

interview handler

D.

call handler

Users dial a 9 before a 10-digit phone number to make an off-net call All 11 digits are sent to the Cisco Unified Border Element before going out to the PSTN The PSTN provider accepts only 10 digits. Which configuration is needed on the Cisco Unified Border Element for calls to be successful?

A.

voice translation-rule 1 rule 1 /^9/ //

B.

voice translation-rule 1 rule 1 /^9(..........)/ //

C.

voice translation-rule 1 rule 1 /^9.+/ //

D.

voice translation-rule 1 rule 1 /^9........./ //

A company deploys centralized cisco ucm architecture for a hub location and two remote sites.

*The company has only one ITSP connection at the hub connection, and ITSP supports only G.711 calls

*Remote site A has a 1-Gbps fiber connection to the hub connection and calls to and from remote side A use G.711 codec

*Remote site B has a 1 T1 connection to the hub location and calls to and from remote site B use G.729 codec

Based on the provided guidance, a Cisco voice engineer must design media resource management for the customer What is the method that needs to be followed?

A.

configure the hardware transcoder on the site B router

B.

configure the hardware transcoder on the site A router

C.

configure the hardware transcoder on the hub location router

D.

configure the software transcoder on Cisco UCM to support voice calls to and from both remote sites

An administrator installs a new Cisco TelePresence video endpoint and receives this error:"AOR is not permitted by Allow/Deny list. Which action should be taken to resolve this problem?

A.

Reboot the VCS server and attempt reregistration.

B.

Change the SIP trunk configuration.

C.

Correct the restriction policy settings.

D.

Upload a new policy in VCS.

Page: 1 / 6
Total 361 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved