XK0-005 CompTIA Linux+ Exam Free Practice Exam Questions (2025 Updated)

The command that will allow the technician to execute the services and continue deploying other microservices within the same terminal session is bg %1 job name. This command will send the job with ID 1 and name job name to the background, where it will run without occupying the terminal. The other options are incorrect because:

gedit & disown will launch a graphical text editor in the background and detach it from the terminal, but it will not execute any service.

kill 9 %1 will terminate the job with ID 1 using a SIGKILL signal, which cannot be ignored or handled by the process.

fg %1 will bring the job with ID 1 to the foreground, where it will occupy the terminal until it finishes or is stopped. References: CompTIA Linux+ Study Guide, Fourth Edition, page 181-182.

SSH, or Secure Shell, is a protocol that allows you to access a remote terminal or virtual machine securely over an encrypted connection. You can use SSH to run commands, transfer files, or tunnel network traffic on a remote system. To use SSH, you need an SSH client program on your local system and an SSH server program on the remote system. You also need to authenticate yourself using a username and password or a public/private key pair. SSH is widely used by system administrators, developers, and engineers to remotely manage Linux servers and other devices.

The other options are not correct answers. TFTP, or Trivial File Transfer Protocol, is a simple protocol that allows you to transfer files between systems, but it does not provide any security or encryption features. SCP, or Secure Copy Protocol, is a protocol that uses SSH to securely copy files between systems, but it does not provide a remote terminal access. FTP, or File Transfer Protocol, is another protocol that allows you to transfer files between systems, but it also does not provide any security or encryption features.

The ~/.ssh/config file can be used to set various options for SSH connections, including the port number, for specific hosts or groups of hosts. This file is located in the user’s home directory and affects only the current user. The /etc/ssh/sshd_config file is used to configure the SSH server daemon, not the client. The /etc/ssh/moduli file contains parameters for Diffie-Hellman key exchange, not port settings. The ~/.ssh/authorized_keys file contains public keys for authentication, not port settings. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Secure Shell (SSH), page 414.

The rpm command is used to manage RPM packages on Linux systems. The -qf option queries the package name that provides a given file. Therefore, the command rpm -qf /bin/someapp will show the RPM package name that provides the binary file /bin/someapp. The statements B, C, and D are incorrect because they do not query the package name, but rather verify, remove, or install a package. References: [How to Use RPM Command in Linux with Examples]

The IP ping works, but DNS resolution fails, indicating that a DNS server is not configured properly in /etc/resolv.conf. That file is responsible for DNS resolution.

Source: CompTIA Linux+ XK0-005 Study Guide – Chapter 9: Networking

The /sbin directory contains essential system binaries that are typically only used by the root user. These binaries include commands like ifconfig, fdisk, and reboot, which require root privileges to execute. /bin contains user-level binaries, while /root is the home directory of the root user, and /lib holds shared libraries.

This will prevent the file app.conf from being tracked by Git and uploaded to the repository. The .gitignore file is a special file that contains patterns of files and directories that Git should ignore. Any file that matches a pattern in the .gitignore file will not be staged, committed, or pushed to the remote repository. The .gitignore file should be placed in the root directory of the repository and committed along with the other files.

The other options are incorrect because:

A. Run git exclude app.conf

This is not a valid Git command. There is no such thing as git exclude. The closest thing is git update-index --assume-unchanged, which tells Git to temporarily ignore changes to a file, but it does not prevent the file from being uploaded to the repository.

B. Run git stash app.conf

This will temporarily save the changes to the file app.conf in a stash, which is a hidden storage area for uncommitted changes. However, this does not prevent the file from being tracked by Git or uploaded to the repository. The file will still be part of the working tree and the index, and it will be restored when the stash is popped or applied.

C. Add app.conf to .exclude

This will have no effect, because Git does not recognize a file named .exclude. The only files that Git uses to ignore files are .gitignore, $GIT_DIR/info/exclude, and core.excludesFile.

The error "cannot resolve host" indicates a DNS resolution failure. The file /etc/resolv.conf defines the DNS server(s) to be used for name resolution.

/etc/interfaces configures network interfaces.

/etc/hosts.allow is for TCP wrappers access control, not DNS.

/etc/hostname defines the local system's hostname, not DNS configuration.

This is because the application server can ping the database server’s IP address, but not its hostname, which suggests that the DNS resolution is not working properly. DNS servers are responsible for translating hostnames into IP addresses, and vice versa. If the application server has incorrect or unreachable DNS servers configured, it will not be able to resolve the hostname of the database server and communicate with it.

To troubleshoot this issue, the systems engineer should check the DNS configuration on the application server, which is usually stored in the /etc/resolv.conf file. This file should contain valid nameserver entries that point to the DNS servers that can resolve the database server’s hostname. For example, a typical /etc/resolv.conf file may look like this:

nameserver 8.8.8.8 nameserver 8.8.4.4

These are the IP addresses of Google’s public DNS servers, which can be used as a fallback option if the default DNS servers are not working.

Alternatively, the systems engineer can use the nslookup or dig commands to test the DNS resolution of the database server’s hostname from the application server. These commands will query a specified DNS server and return the IP address of the hostname, or an error message if the resolution fails. For example, to query Google’s public DNS server for the IP address of comptia.org, the command would be:

nslookup comptia.org 8.8.8.8

or

dig comptia.org @8.8.8.8

To create an appropriate device label, format and create an ext4 file system on the new partition, you can use the following commands:

To create a GPT (GUID Partition Table) label on the new drive /dev/sdc, you can use the parted command with the -s option (for script mode), the device name (/dev/sdc), the mklabel command, and the label type (gpt). The command is:

parted -s /dev/sdc mklabel gpt

To create a primary partition of 10 GB on the new drive /dev/sdc, you can use the parted command with the -s option, the device name (/dev/sdc), the mkpart command, the partition type (primary), the file system type (ext4), and the start and end points of the partition (1 and 10G). The command is:

parted -s /dev/sdc mkpart primary ext4 1 10G

To format and create an ext4 file system on the new partition /dev/sdc1, you can use the mkfs command with the file system type (ext4) and the device name (/dev/sdc1). The command is:

mkfs.ext4 /dev/sdc1

You can verify that the new partition and file system have been created by using the lsblk command, which will list all block devices and their properties.

The high %iowait value (50.38%) in the iostat output suggests that the CPU is waiting for I/O operations to complete, often caused by storage bottlenecks rather than a lack of CPU or memory resources. CompTIA Linux+ recommends checking I/O wait times to assess storage-related slowdowns, indicating potential disk access issues. Reference: CompTIA Linux+ Study Guide.

The best command to use to rename the image to match the correct version 2.1.2 is A. docker tag comptia/app:2.1.1 comptia/app:2.1.2. This command will create a new tag for the existing image with the new version number, without changing the image content or ID. The other commands are either incorrect or not suitable for this task. For example:

B. docker push comptia/app:2.1.1 comptia/app:2.1.2 will try to push two images to a remote repository, but it does not rename the image locally.

C. docker rmi comptia/app:2.1.1 comptia/app:2.1.2 will try to remove two images from the local system, but it does not rename the image.

D. docker update comptia/app:2.1.1 comptia/app:2.1.2 will try to update the configuration of a running container, but it does not rename the image.

The command iptables -A POSTROUTING -s 172.17.0.0/16 -o eth0 -j MASQUERADE configures Network Address Translation (NAT) using iptables. This ensures that traffic from the internal network (172.17.0.0/16) going out through the eth0 interface will appear to be originating from the eth0 IP address. This is commonly used for internet-sharing or NAT setups in Linux.

Comprehensive and Detailed Explanation From Exact Extract:

The ntpdate command synchronizes the system clock with a remote NTP server immediately, correcting any significant time drift. This is ideal for one-time corrections.

For example:

bash

CopyEdit

ntpdate pool.ntp.org

Other options:

A. hwclock reads or sets the hardware clock, but does not sync with network time.

C. timedatectl can set the time manually or manage time settings, but does not immediately sync with a remote NTP server.

D. ntpd -q can also sync the clock once, but ntpdate is designed specifically for immediate synchronization and is more straightforward for one-time corrections.

timedatectl set-timezone is the correct systemd-based tool to change the system's time zone.

The logs clearly indicate the Out of Memory (OOM) killer terminated the process (Killed process... oom_score...).

D is correct: The application attempted to allocate more memory than was available (RAM + swap), triggering the OOM killer.

Incorrect Options:

A: No CPU-related error or throttling is shown.

B: No network error or socket limitation messages are shown.

C: No error related to open file handles or disk usage.

umask subtracts permissions from default (666 for files, 777 for dirs).

To achieve 640 for files → umask = 137

To achieve 750 for dirs → umask = 027

The closest match to both for stricter permissions is umask 0037.

Comprehensive and Detailed Step-by-Step Explanation:

0 9 * * 6,0 ensures execution at 9:00 AM on Saturdays (6) and Sundays (0).

1-5 would run the script Monday-Friday.

*/3 is incorrect because it runs every three days.

1 * * runs only on the 1st day of each month.

The best command sequence to rebuild a kernel module from source code is A. ./configure make make install. This is the standard way to compile and install a Linux kernel module, as explained in the web search result 5. The other commands are either not relevant, not valid, or not sufficient for this task. For example:

B. wget gcc cp will try to download, compile, and copy a file, but it does not specify the source code, the module name, or the destination directory.

C. tar xvzf build cp will try to extract, build, and copy a compressed file, but it does not specify the file name, the module name, or the destination directory.

D. build install configure will try to run three commands that are not defined or recognized by the Linux shell.