D-OME-OE-A-24 EMC Dell OpenManage Operate Achievement Free Practice Exam Questions (2025 Updated)

When deploying a template that includes booting from an ISO in OpenManage Enterprise, specifying the share type is crucial for the server to access and boot from the ISO image. The correct share type to use in the Deploy Template wizard for this purpose is HTTP.

Here’s why HTTP is the appropriate choice:

HTTP (Hypertext Transfer Protocol) is widely used for transmitting files over the internet or a network. When a server boots from an ISO, it requires a protocol that can be used to access the file over a network. HTTP is suitable for this because it allows the server to download the ISO image as if it were accessing a web page or file on the internet1.

The other options, such as SCP (Secure Copy Protocol), FTP (File Transfer Protocol), and CIFS (Common Internet File System), are also used for file transfers but may not be supported for this specific scenario within the Deploy Template wizard of OpenManage Enterprise.

For detailed instructions on deploying server templates and configuring boot from ISO, administrators should refer to the official Dell OpenManage Enterprise documentation and support resources1.

=========================

Questions no: 36 Verified AnswerD. From the SupportAssist Enterprise web console, go to Extensions > Adapters Select the OpenManage Enterprise Adapter and click Sync now

Step by Step Comprehensive Detailed Explanation with ReferencesTo immediately add the newly discovered R640 servers into SupportAssist Enterprise, the administrator should use the SupportAssist Enterprise web console to manually initiate a synchronization. Here are the steps:

Log into SupportAssist Enterprise: Access the SupportAssist Enterprise web console using the appropriate credentials.

Navigate to Extensions: Go to the ‘Extensions’ section of the console.

Select Adapters: Click on ‘Adapters’ to view the list of available adapters.

Choose OpenManage Enterprise Adapter: Find and select the OpenManage Enterprise Adapter from the list.

Initiate Sync: Click on the ‘Sync now’ button to start the synchronization process immediately.

This action will force the SupportAssist Enterprise to synchronize with OpenManage Enterprise outside of the regular schedule, allowing the new systems to be added without waiting for the next automatic sync12.

For more detailed instructions on managing and synchronizing devices between OpenManage Enterprise and SupportAssist Enterprise, administrators can refer to the official Dell SupportAssist Enterprise User’s Guide2.

To replace an untrusted certificate with a trusted one in OpenManage Enterprise, the administrator must first generate a Certificate Signing Request (CSR). This is the initial step required to obtain a certificate from a Certificate Authority (CA). Here are the steps to generate a CSR:

Navigate to Application Settings: Access the OpenManage Enterprise web interface and go to the Application Settings.

Go to Security: Within the Application Settings, find and select the Security section.

Access Certificates: Look for the Certificates option under the Security settings.

Generate CSR: Click on the ‘Generate Certificate Signing Request’ button to create a new CSR.

Fill out CSR Details: Provide the necessary information for the CSR, including the name of the appliance and other relevant details.

Submit CSR to CA: Once the CSR is generated, it needs to be submitted to a CA for signing. The CA will then provide a trusted certificate based on the CSR.

The process of generating a CSR and managing custom certificates in OpenManage Enterprise is detailed in the Dell Support Knowledge Base1. After obtaining the signed certificate from the CA, the administrator can then upload it to OpenManage Enterprise to replace the current untrusted certificate.

Questions no: 27 Verified AnswerC. Catalog is linked to a firmware baseline

Step by Step Comprehensive Detailed Explanation with ReferencesIn OpenManage Enterprise, a catalog file cannot be deleted if it is linked to a firmware baseline. The firmware baseline relies on the catalog file to determine the applicable updates for devices managed by OpenManage Enterprise. If a catalog is in use by a baseline, it is protected from deletion to maintain the integrity of the firmware update process.

Here’s a detailed explanation:

Administrator Privileges: While administrator privileges are required for many actions within OpenManage Enterprise, they do not prevent the deletion of a catalog file unless it is linked to a baseline.

At Least One Catalog Must Be Present: OpenManage Enterprise does not require a catalog to be present at all times; catalogs can be added or removed as needed.

Catalog is Linked to a Firmware Baseline: This is the correct reason. The system prevents the deletion of a catalog file that is currently associated with a firmware baseline to avoid disrupting any ongoing or planned update processes.

Online Catalogs Cannot Be Deleted: Online catalogs can be deleted unless they are associated with a firmware baseline.

The process and restrictions related to managing catalog files are documented in the OpenManage Enterprise User’s Guide and support resources provided by Dell123.

=========================

To ensure that all future servers installed in a particular data center are automatically included in the appropriate device groups, the OpenManage Enterprise Administrator should create dynamic groups based on a data center-specific attribute. Dynamic groups are designed to automatically update their membership based on the criteria defined, such as location, model, or other attributes.

Here’s how this can be accomplished:

Define the Criteria: Determine the specific attribute that identifies the data center location, which could be a naming convention, IP range, or any other relevant identifier.

Create Dynamic Group: In OpenManage Enterprise, navigate to the device group management section and create a new dynamic group.

Set the Attribute: Configure the dynamic group with the chosen data center-specific attribute as the criteria for group membership.

Save the Group: Save the configuration, and the dynamic group will automatically include any new server that matches the criteria.

Dynamic groups are advantageous because they reduce the need for manual updates to group membership as new servers are added to the environment. This ensures that device groups remain up-to-date and reflective of the current infrastructure without additional administrative effort1.

For more detailed instructions on creating and managing dynamic groups in OpenManage Enterprise, refer to the official Dell EMC OpenManage Enterprise User’s Guide2.

=========================

The SMB version setting is one that can only be configured in the Text User Interface (TUI) of the OpenManage Enterprise appliance. The TUI provides a command-line interface for the configuration and management of various settings that are not available in the graphical user interface (GUI).

Here’s why the SMB version is typically configured in the TUI:

DNS name and NTP configuration are basic network settings that are usually configurable via the GUI for ease of access and management.

Proxy settings may also be available in the GUI, as they are often required for the appliance to communicate with external services through a proxy server.

SMB version, on the other hand, pertains to the Server Message Block protocol, which is used for network file sharing. Since SMB settings can involve complex configurations and security considerations, they are often managed in the TUI to provide a more controlled environment for changes.

The use of the TUI for such configurations is documented in the Dell EMC OpenManage Enterprise User’s Guide, which details the procedures for accessing and using the TUI for various system settings1.

=========================

The correct order of steps to manually onboard a device in Dell OpenManage Operate is:

Go to the IP Addresses page.

Select Discovery.

Enter the admin credentials.

Select the target device.

Select Onboarding.

To manually onboard a device using Dell OpenManage Operate, follow these steps:

Go to the IP Addresses page: This is typically where you begin by accessing your inventory of devices and their respective IP addresses within Dell OpenManage Operate.

Select Discovery: The discovery process involves scanning for devices that can be managed within your network environment.

Enter the admin credentials: For security purposes and to ensure that only authorized personnel can add devices, administrative credentials are required.

Select the target device: After discovering devices, you need to select which specific device you want to onboard into Dell OpenManage Operate for management.

Select Onboarding: Finally, after selecting your target device, you proceed with onboarding it into your management console for monitoring and management tasks.

For verified answers according to Dell OpenManage Operate documents, please refer directly to those official documents or contact Dell support for confirmation as this information cannot be verified without access to those specific resources.

The issue described is likely due to the OpenManage Enterprise (OME) appliance’s limitation in resolving DNS names through its secondary network interface. Typically, an OME appliance is configured to use its primary network interface for DNS name resolution. If a firmware catalog on a file share is only accessible by IP address and not by name when using the secondary adapter, it suggests that DNS queries are not being routed or resolved through the secondary interface.

This behavior can be attributed to the network configuration and DNS settings within the OME appliance. In many systems, the primary NIC is set up with the necessary DNS configuration to resolve domain names, while additional NICs may not have the same settings or may be intended for different purposes, such as management or backup networks.

For more detailed information on configuring network settings and DNS resolution in OpenManage Enterprise appliances, including how to manage multiple NICs, you can refer to the official Dell documentation and support forums12.

=========================

When a device on the network is identified by the OpenManage Enterprise Discovery process, the details of the device are saved in the OpenManage Enterprise (OME) database. The OME database is the central repository where all the information and configurations related to the discovered devices are stored. This includes hardware details, monitoring data, and any other relevant information that the OpenManage Enterprise system uses to manage and monitor the devices1.

The database is designed to handle a large amount of data efficiently, ensuring that all device details are readily accessible for management tasks, reporting, and analytics within the OpenManage Enterprise platform1.

For more information on the discovery process and data storage in OpenManage Enterprise, administrators can refer to the official Dell OpenManage documentation and support resources1.

=========================

In Dell OpenManage Enterprise, a single query group can contain a maximum of 32 conditions or queries. This allows for the creation of detailed and specific criteria for managing and monitoring systems within the application.

The process for creating a query group in OpenManage Enterprise typically involves:

Navigating to the query section within the OpenManage Enterprise console.

Initiating the creation of a new query group.

Adding conditions or queries to the group, with the option to specify up to 32 different criteria.

Saving the query group for later use in reports, alerts, or system monitoring tasks.

This information is consistent with the latest documentation and user guides provided by Dell for OpenManage Enterprise, ensuring that the answer is verified and up-to-date1. It’s important to refer to the most recent OpenManage Enterprise documentation or contact Dell support for the latest features and limitations.

When performing out-of-band updates using OpenManage Enterprise and the task fails due to a firewall setting, despite the iDRAC logs indicating that the job was scheduled successfully, it is typically because iDRAC access is blocked to the Internet. This blockage prevents the firmware download task from completing successfully.

The update process involves several steps, and here’s how the firewall setting can impact it:

Download the Updates to the Appliance: The updates are downloaded from Dell’s servers or a local share. If this step fails, it could be due to a network or firewall issue1.

Mount SMBv2 Share to the iDRAC: This step uses ports 137, 138, 139, and 445. If iDRAC cannot access these ports on the Internet due to a firewall block, the update cannot proceed1.

Copy the firmware update to the iDRAC/CMC: If this step fails, it could be due to network issues, including firewall settings that block iDRAC’s Internet access1.

The error that typically indicates a failure in this process is RED016: Unable to Mount Remote Share, which would occur if the iDRAC cannot access the necessary network resources due to a firewall blockage1. Therefore, ensuring that iDRAC has proper Internet access is crucial for the out-of-band update process to succeed.

The World Wide Port Name (WWPN) is a unique identifier used in storage networking environments. For a server with Virtual Identities applied using a template and an assigned FCoE FIP MAC address, the WWPN is typically derived from the MAC address.

In this case, the FCoE FIP MAC address is 02:AC:ED:AD:FA:CE:10. The WWPN usually includes a standardized prefix, which for FCoE is often “20:00”. Therefore, the WWPN for the newly provisioned PowerEdge R650 server would be 20:00 followed by the MAC address, making the correct answer:

A. 20:00:02:AC:ED:AD:FA:CE:10

This format is consistent with the standard practice for assigning WWPNs based on MAC addresses, where the prefix indicates the type of protocol or interface being used1.

For more detailed information on WWPN assignment and its relation to MAC addresses in Dell servers, administrators can refer to the Dell PowerEdge MX Networking Deployment Guide and other official Dell documentation1.

To create a report in OpenManage Enterprise, a user with administrative privileges should navigate to the Monitor page. Here are the steps:

Log in to OpenManage Enterprise: Use your administrative credentials to access the OpenManage Enterprise console.

Navigate to Monitor: From the main menu, go to the Monitor section.

Access Reports: Within the Monitor section, look for the Reports option.

Create Report: Use the integrated reports or create custom reports. Reports can collate and view data about alerts, devices, groups, jobs, and servers1.

The Monitor page provides the necessary tools and options to build, run, and manage reports, which can then be saved in various formats or sent by email1. This functionality is essential for administrators to keep track of system performance, inventory, and other critical metrics.

For more detailed instructions on creating reports in OpenManage Enterprise, administrators can refer to the official Dell OpenManage documentation1.

A screenshot of a computer error Description automatically generated

To reconfigure the static IP address of a new OpenManage Enterprise appliance to ensure communication on the 192.168.1.x network, follow these ordered steps:

Select Set Network Parameters: First, access the Text User Interface (TUI) of the appliance and select ‘Set Network Parameters’. This is where you can make administrative changes to the network settings.

Enter the Admin Password: You will be prompted to enter the Admin password to authorize the changes.

Use the Tab Key to Navigate: Use the Tab key to go to the network settings section.

Enter Your Static IP Details: Enter the new static IP details that correspond to the 192.168.1.x network.

Ensure Enable IPv4 is Checked: Make sure that the ‘Enable IPv4’ option is checked and that ‘Enable DHCP’ is unchecked to use a static IP.

Use the Arrow Key to Select Apply: After entering the new IP details, use the Arrow key to select ‘Apply’.

Press Enter to Restart Services: Press enter to confirm the changes, enter the admin password again if prompted, and restart the necessary services for the changes to take effect.

The process of changing the IP address involves accessing the TUI, which is a command-line interface used for configuring network settings on the appliance. By following the steps above, you can change the IP address to match the subnet of the network you are on, ensuring that the appliance can communicate with other devices on the network.

For more detailed guidance on changing network settings, refer to the official Dell OpenManage Enterprise documentation, which provides instructions for accessing and using the TUI for network configuration1.

=========================

In OpenManage Enterprise, when creating a discovery job, the scheduling options available are typically Daily and Weekly. This allows administrators to set up discovery jobs to run either every day or on specific days of the week, depending on their network management needs and preferences.

Here’s a detailed explanation:

Daily: This option schedules the discovery job to run once every day. It’s useful for environments where frequent updates to the device inventory are necessary.

Weekly: This option allows the administrator to schedule the discovery job to run on specific days of the week. This is suitable for environments where weekly updates are sufficient.

These scheduling options provide flexibility in how often the discovery process is executed, ensuring that the device inventory is kept up-to-date according to the specific requirements of the organization1.

For more information on scheduling discovery jobs in OpenManage Enterprise, administrators can refer to the official Dell OpenManage Enterprise User’s Guide2.