Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

201 F5 TMOS Administration Free Practice Exam Questions (2025 Updated)

Prepare effectively for your F5 201 TMOS Administration certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

F5 201 Premium Access     Download Demo    
Page: 2 / 4
Total 254 questions

All pool members are online. All other virtual server settings are at default What might after the load balancing behavior?

A.

enabing SNAT automap

B.

enabing a falback host in the http profile

C.

adding a oneconnect profile

D.

adding a persistence profile

The interface 1.1 of the BIG-IP device has been connected to a link dedicated to traffic on VLAN 120. What should the BIG-IP Administrator do to receive traffic from the VLAN?

A.

Create a new VLAN object and set Customer Tag to 120

B.

Create a new VLAN object and assign the interface 1.1 untagged

C.

Create a new trunk object with interface 1.1 assigned

D.

Create a new trunk object and assign it to the VLAN

When configuring a pool member's monitor, which three association options are available? (Choose three.)

A.

inherit the pool's monitor

B.

inherit the node's monitor

C.

configure a default monitor

D.

assign a monitor to the specific member

E.

do not assign any monitor to the specific member

A BIG-IP Administrator creates an HTTP Virtual Server using an iApp template. After the Virtual Server is

created, the user requests to change the destination IP addresses. The BIG-IP Administrator tries to

change the destination IP address from 10.1.1.1 to 10.2.1.1 in Virtual Server settings, but receives the

following error:

The application service must be updated using an application management interface

What is causing this error?

A.

The Application Service was NOT deleted before making the IP address change.

B.

The IP addresses are already in use.

C.

The Application Services have Strict Updates enabled.

D.

The IP addresses used are NOT from the same subnet as the Self IP.

A user needs to determine known security vulnerabilities on an existing BIG-IP appliance and how to

remediate these vulnerabilities.

Which action should the BIG-IP Administrator recommend?

A.

Verify the TMOS version and review the release notes

B.

Create a UCS archive and upload to Health

C.

Create a UCS archive and open an F5 Support request

D.

Generate a view and upload to Heath

Active connections to pool members are unevenly distributed. The load balancing method is Least Connections (member) Priority Group Activation is disabled. What is a potential cause of the event distribution?

A.

Priority Group Activation is disabled

B.

SSL Profile Server is applied

C.

Persistence profile is applied

D.

incorrect load balancing method

Refer to the exhibit.

A BIG-IP Administrator creates a new Virtual Server. The end user is unable to access the page. During

troubleshooting, the administrator learns that the connection between the BIG-IP system and server is

NOT set up correctly.

What should the administrator do to solve this issue?

A.

Disable Address Translation

B.

Set Address Translation to Auto Map, configure a SNAT pool, and have pool members in the same subnet of the servers

C.

Set Address Translation to SNAT and configure a specific translation address

D.

Set Address Translation to SNAT and have self-IP configured in the same subnet of servers

Refer to the exhibit.

An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to

/resources/201.1.2h.l_l.com they are unable to receive content.

What is the likely cause of the issue?

A.

The pool associated with the virtual server does not have priority group activation enabled.

B.

The virtual address does not have ARP enabled.

C.

The virtual address does not have route advertising enabled.

D.

The pool associated with the virtual server is falling its health check.

When initially configuring the BIG-IP system using the config utility, which two parameters can be set? (Choose two.)

A.

the netmask of the SCCP

B.

the IP address of the SCCP

C.

the port lockdown settings for the SCCP

D.

the netmask of the host via the management port

E.

the IP address of the host via the management port

F.

the port lockdown settings for the host via the management port

A BIG-IP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIG-IP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at

their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address when the associated packet is sent to the pool member?

A.

200.200.1.1

B.

150.150.10.11

C.

Floating self IP address on VLAN where the packet leaves the system

D.

Floating self IP address on VLAN where the packet arrives on the system

Refer to the exhibit.

A pool member fails the monitor checks for about 30 minutes and then starts passing the monitor

checks. New traffic is Not being sent to the pool member.

What is the likely reason for this problem?

A.

The pool member is disabled

B.

Monitor Type is TCP Half Open

C.

Manual resume is enabled

D.

Time Until Up is zero

A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator

tries to restore a UCS taken from the previous device, but the restore fails. The following error appears

inthe/var/log/itm.

mcpd [****J: •*****»;0; License is not operational (expired or digital signature does not match

contents.)

What should the BIG-IP Administrator do to avoid this error?

A.

Use the appropriate tmsh command with the no-license option

B.

Revoke the license prior to restoring

C.

Reactivate the license on the new device using the manual activation method

D.

Remove the license information from the UCS archive

Which two methods can be used to determine which BIG-IP is currently active? (Choose two.)

A.

The bigtop command displays the status.

B.

Only the active system's configuration screens are active.

C.

The status (Active/Standby) is embedded in the command prompt.

D.

The ifconfig a command displays the floating addresses on the active system.

A BIG-IP Administrator needs to install a HotFix on a standalone BIG-IP device, which has HD1.1 as the Active Boot Location. The BIG-IP Administrator has already re-activated the license and created an UCS archive of the configuration. In which sequence should the BIG-IP Administrator perform the remaining steps?

A.

Install HotFix in HD 1.1, Reboot the BIG-IP device. Install UCS Archive

B.

Install HotFix in HO 1.2, Install base Image in HD 1.2, Activate HD1.2

C.

Install base Image in HD1.2, Install HotFix in HD1.2, Activate HD 1.2

D.

Activate HD 1.2, Install base image in HD 1.2. Install HotFix in HD 1.2

A BIG-IP Administrator needs to have a BIG-IP linked to two upstream switches for resilience of the external network. The network engineer who is going to configure the switch instructs the BIG-IP Administrator to configure interface binding with LACP. Which configuration should the administrator use?

A.

A virtual server with an LACP profile and the switches' management IPs as pool members.

B.

A virtual server with an LACP profile and the interfaces connected to the switches as pool members.

C.

A Trunk listing the allowed VLAN IDs and MAC addresses configured on the switches.

D.

A Trunk containing an interface connected to each switch.

When using the setup utility to configure a redundant pair, you are asked to provide a "Failover Peer IP". Which address is this?

A.

an address of the other system in its management network

B.

an address of the other system in a redundant pair configuration

C.

an address on the current system used to listen for failover messages from the partner BIG-IP

D.

an address on the current system used to initiate mirroring and network failover heartbeat messages

A BIG-IP Administrator applied the latest hotfix to an inactive boot location by mistake, and needs to downgrade back to the previous hotfix.

What should the BIG-IP Administrator do to change the boot location to the previous hotfix?

A.

Uninstall the newest hotfix and reinstall the previous hotfix

B.

Reinstall the base version and install the previous hotfix

C.

Reinstall the previous hotfix and re-activate the license

D.

Uninstall the base version and restore the UCS

Refer to the exhibit.

The BIG-IP Administrator is investigating disk utilization on the BIG-IP device.

What should the BIG-IP Administrator check next?

A.

Large files on the / file system

B.

Results from the EUD test

C.

Results from the platform diagnostics test

D.

Large files on /usr file system

The current status of a given pool is offline (red). Which condition could explain that state? Assume the descriptions below include all monitors assigned for each scenario.

A.

No monitors are currently assigned to any pool, member or node.

B.

The pool has a monitor assigned to it, and none of the pool members passed the test.

C.

The pool has a monitor assigned to it, and only some of the pool's members passed the test.

D.

A monitor is assigned to all nodes and all nodes have passed the test. The pool's members have no specific monitor assigned to them.

Which file should the BIG-IP Administrator check to determine when a Virtual Server changed its status

A.

/var/log/audit

B.

/var/log/lastlog

C.

/var/log/tm

D.

/var/log/monitors

F5 201 Premium Access     Download Demo    
Page: 2 / 4
Total 254 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved