Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

NSE7_SDW-7.2 Fortinet NSE 7 - SD-WAN 7.2 Free Practice Exam Questions (2025 Updated)

Prepare effectively for your Fortinet NSE7_SDW-7.2 Fortinet NSE 7 - SD-WAN 7.2 certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Fortinet NSE7_SDW-7.2 Premium Access     Download Demo    
Page: 2 / 2
Total 99 questions

Refer to the exhibits.

Exhibit A

Exhibit B -

Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the routing table, and the member status.

The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule.

Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?

A.

The traffic will be load balanced across all three overlays.

B.

The traffic will be routed over T_INET_0_0.

C.

The traffic will be routed over T_MPLS_0.

D.

The traffic will be routed over T_INET_1_0.

Refer to the exhibit.

Two hub-and-spoke groups are connected through a site-to-site IPsec VPN between Hub 1 and Hub 2.

Which two configuration settings are required for Toronto and London spokes to establish an ADVPN shortcut? (Choose two.)

A.

On the hubs,auto-discovery-sendermust be enabled on the IPsec VPNs to spokes.

B.

On the spokes,auto-discovery-receivermust be enabled on the IPsec VPN to the hub.

C.

auto-discovery-forwardermust be enabled on all IPsec VPNs.

D.

On the hubs,net-devicemust be enabled on all IPsec VPNs.

The administrator uses the FortiManager SD-WAN overlay template to prepare an SD-WAN deployment. With information provided through the SD-WAN overlay template wizard, FortiManager creates templates ready to install on spoke and hub devices.

Select three templates created by the SD-WAN overlay template for a spoke device. (Choose three.)

A.

System template

B.

BGP template

C.

IPsec tunnel template

D.

CLI template

E.

Overlay template

Refer to the exhibit.

The exhibit shows output of the command diagnose 3vg sdwan service collected on a FortiGate device.

The administrator wants to know through which interface FortiGate will steer the traffic from local users on subnet 10.0.1.0/255.255.255.192 and with a destination of the business application Salesforce located on HO servers 10.0.0.1.

Based on the exhibits, which two statements are correct? (Choose two.)

A.

When FortiGate cannot recognize the application of the flow it steers the traffic destined to server 10.0.0.1 according to service rule 3.

B.

FortiGate steers traffic to HO servers according to service rule 1 and it uses port1 or port2 because both interfaces are selected.

C.

There is no service defined for the Salesforce application, so FortiGate will use the service rule 3 and steer the traffic through interface T_HQ1.

D.

FortiGate steers traffic for business application according to service rule 2 and steers traffic through port2.

Refer to the exhibits.

Exhibit A -

Exhibit B -

Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN member status, the routing table, and the performance SLA status.

If port2 is detected dead by FortiGate, what is the expected behavior?

A.

Port2 becomes alive after three successful probes are detected.

B.

FortiGate removes all static routes for port2.

C.

The administrator manually restores the static routes for port2, if port2 becomes alive.

D.

Host 8.8.8.8 is reachable through port1 and port2.

Which statement about using BGP routes in SD-WAN is true?

A.

Learned routes can be used as dynamic destinations in SD-WAN rules.

B.

You must use BGP to route traffic for both overlay and underlay links.

C.

You must configure AS path prepending.

D.

You must use external BGP.

Which statement about SD-WAN zones is true?

A.

An SD-WAN zone can contain only one type of interface.

B.

An SD-WAN zone can contain between 0 and 512 members.

C.

You cannot use an SD-WAN zone in static route definitions.

D.

You can configure up to 32 SD-WAN zones per VDOM.

Refer to the exhibit.

An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over T_INET_0_0. However, the traffic is routed over T_INET_1_0.

Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)

A.

The traffic matches a regular policy route configured with T_INET_1_0 as the outgoing device.

B.

T_INET_1_0 has a lower route priority value (higher priority) than T_INET_0_0.

C.

T_INET_0_0 does not have a valid route to the destination.

D.

T_INET_1_0 has a higher member configuration priority than T_INET_0_0.

Refer to the exhibits.

Exhibit A shows the SD-WAN rule status and the learned BGP routes with community 65000:10.

Exhibit B shows the SD-WAN rule configuration, the BGP neighbor configuration, and the route map configuration.

The administrator wants to steer corporate traffic using routes tags in the SD-WAN rule ID 1.

However, the administrator observes that the corporate traffic does not match the SD-WAN rule ID 1.

Based on the exhibits, which configuration change is required to fix issue?

A.

In the dc1-lan-rm route map configuration, set set-route-tag to 10.

B.

In SD-WAN rule ID 1, change the destination to use ISDB entries.

C.

In the dc1-lan-rm route map configuration, unset match-community.

D.

In the BGP neighbor configuration, apply the route map dc1-lan-rm in the outbound direction.

Fortinet NSE7_SDW-7.2 Premium Access     Download Demo    
Page: 2 / 2
Total 99 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved