Month End Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

HPE6-A72 HP Aruba Certified Switching Associate Exam Free Practice Exam Questions (2025 Updated)

Prepare effectively for your HP HPE6-A72 Aruba Certified Switching Associate Exam certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2025, ensuring you have the most current resources to build confidence and succeed on your first attempt.

HP HPE6-A72 Premium Access     Download Demo    
Page: 1 / 2
Total 105 questions

Which two statements accurately describe the features of NetEdit? (Choose two.)

A.

NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.

B.

NetEdit includes trial licensing for up to 10 nodes.

C.

NetEdit can perform configuration and compliance validation.

D.

NetEdit supports viewing and editing multiple devices using a single deployment plan.

E.

NetEdit can run on a mobile device using Android or Apple IOS.

ServiceOS login:admin

SVOS>password

Enter password:********

Confirm password:********

The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.

What is the default password that is required for the admin account while under the Service OS console?

A.

No password is set for this account.

B.

"password"

C.

"forgetme!"

D.

The same login password that has lost originally.

What are two features in a 2-Tier design that are implemented at the Access layer? (Choose two.)

A.

VPN access

B.

WAN/MPLS connectivity

C.

Endpoint Access

D.

Deep packet inspection

E.

Power over Ethernet

Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.

What is the binary conversion of the hexadecimal value 0x2001?

A.

0010 0001

B.

0002 0000 0000 0001

C.

0011 0000 0000 0001

D.

0010 0000 0000 0001

Refer to the exhibits.

The AOS-CX 6300M switch is attempting to configure VSF with a peer CX 6300F switch. What is one reason you are receiving the above error when attempting to configure VSF on the AOS-CX 6300M switch?

A.

AOS-CX VSF links can only be applied to uplink ports with 10G, 25G. and 50G speeds.

B.

VSF Is not possible between CX 6300M and CX 6300F AOS-CX switches.

C.

Link 1 cannot be used if the attached CX 6300F VSF member 2 has already assigned link 1

D.

The port1/1/21 has been shutdown

Refer to the exhibit.

The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)

A.

Local

B.

EIGRP

C.

BGP

D.

ISIS

E.

RIPng

What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)

A.

Offloading processing from the Core without routing at the Access layer.

B.

Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.

C.

Lowering the cost of a deployment due to needing less switches overall.

D.

Better scalability in a campus with a large number of buildings.

E.

Gaining the flexibility to connect the Data-Center to any Access layer switch.

Refer to the exhibit.

What does the command page result in?

A.

Starts an automatic page scrolling effect that pauses for a few seconds every 30 rows.

B.

Enables a terminal notification when a new debug event occurs for L2MAC events.

C.

Shows a new terminal window opening to allow typing while debugging occurs.

D.

Results in a page break to disable the default continuous scrolling In the console.

Refer to the exhibit.

Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?

A.

11010101

B.

10110001

C.

01001011

D.

11111000

What is Deep Packet Inspection?

A.

a machine learning method of packet inspection for the purpose of choosing which dynamic routing protocol to automatically assign

B.

a concept that applies to firewalls, when examining packets only up through Layer 4

C.

a function of Policy Based Routing that examines the entire IPv4 header to forward traffic based on factors other than destination address

D.

a firewall process of examining the packet header all the way to Layer 7 in order to determine if the packet should be permitted or denied

Which two statements are true about the state of a new HPE Aruba Networking CX 6300 Series switch on factory defaults? (Select two.)

A.

The CX 6300M has support for IP addressing applied to switched virtual interfaces (SVIs) but not on routed ports.

B.

LLDP is not enabled but is supported on all AOS-CX switches.

C.

The CX 6300M up-link ports only support routed mode. All other ports only support access mode.

D.

For the CX 6300M switch, all up-link ports and switchports are configured as access mode.

E.

LLDP is enabled on up-link ports and switchports for the CX 6300M.

Refer to the exhibit.

You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master. What is a valid configuration for Access-2 to join the VSF stack?

A.

Access-2# configure

Access-2(config)# vsf member 1

Access-2(config)# vsf renumber-to 2

Access-2(vsf-member-1)# link 2 2/1/28

Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch.

Do you want to continue (y/n)? y

B.

Access-2# configure

Access-2(config)# vsf member 1

Access-2(vsf-member-1)# link 1 1/1/28

Access-2(vsf-member-1)# exit

Access-2(config)# vsf renumber-to 2

This will save the VSF configuration and reboot the switch.

Do you want to continue (y/n)? y

C.

Access-2# configure

Access-2(config)# vsf member 2

Access-2(vsf-member-1)# link 1 1/1/28

Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch.

Do you want to continue (y/n)? y

D.

Access-2# configure

Access-2(config># vsf member 2

Access-2(vsf-member-1)# link 2 1/1/28

Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch.

Do you want to continue (y/n)? y

Which two commands will save the running-config so that changes will be loaded automatically on the next reboot? (Choose two.)

A.

write memory

B.

save

C.

copy config config1 config startup-config

D.

copy running-config startup-config

E.

copy running-config checkpoint boot-config

Refer to the exhibit.

Which command produces the above output?

A.

show interface port 1/1/10 trunk

B.

show vlan port 1/1/10

C.

show trunk port 1/1/10 extended

D.

show interface port 1/1/10 switchport

What are the commands to disable SSH and HTTPS services from the default VRF?

A.

Core-1(config)# no ssh server Core-1(config)# no https-server

B.

Core-1# no ssh server vrf default Core-1# no https-server vrf default

C.

Core-1(config)# no ssh server enable Core-1(config)# no https-server enable

D.

Core-1(config)# no ssh server vrf default Core-1(config)# no https-server vrf default

What is the Link Layer Discovery Protocol?

A.

a discovery protocol used between Layer 3 devices to determine routes within a single autonomous system

B.

a standardized IPv6 neighbor discovery protocol used to replace the ARP and broadcast mechanism used in IPv4

C.

a standardized protocol for communicating directly-connected device information and capabilities.

D.

an Aruba proprietary discovery protocol supported in all Aruba switches along with Cisco Discovery Protocol or CDP

Refer to the exhibit.

All four switches in the diagram have been configured with the region name "Aruba1".

What two other MSTP configurations must match for switches within the same MST region? (Choose two.)

A.

MST region type

B.

MST Bridge ID

C.

MST version number

D.

MST revision number

E.

MST VLAN to instance mapping

What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?

A.

Demodulation

B.

Modulation

C.

Propagation

D.

Encapsulation

HP HPE6-A72 Premium Access     Download Demo    
Page: 1 / 2
Total 105 questions
Copyright © 2014-2025 Solution2Pass. All Rights Reserved