H12-811_V2.0 Huawei HCIA-Datacom V2.0 Free Practice Exam Questions (2026 Updated)
Prepare effectively for your Huawei H12-811_V2.0 HCIA-Datacom V2.0 certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2026, ensuring you have the most current resources to build confidence and succeed on your first attempt.
The network administrator performs the configuration shown in the figure on SW1 and SW2. Which of the following statements are false about this scenario?
Rl has the following configurations:
[R1] aaa
[R1-aaa] authentication-scheme auth1
[R1-aaa-authen-authl] authentication-mode radius local
[R1-aaa-authen-authl] quit
According to the preceding information. Assume that R1 is properly connected to the RADIUS server. When a user accesses R1, R1 first performs RADIUS
authentication on the user. If the RADIUS server sends an authentication failure message to R1, R1 then performs local authentication on the user.
The MAC address table of SW1 is shown in the figure. If SW1 receives a data frame with the destination MAC address 0050-5600-0003 from PC1, through which of the following interfaces does SW1 send the data frame?
When deploying a WLAN with the WAC + Fit AP architecture on a customer ' s live network, you find that APs fail to go online. Which of the following are possible causes? (Select all that apply)
The following ACL rule is configured on R1:
[R1] time-range working-time 8:00 to 18:00 working-day
[R1] acl name work-acl basic
[R1-acl4-basic-work-acl] rule deny source 192.168.1.0 0.0.0.255 time-range working-time
[R1-acl4-basic-work-acl] quit
According to the rule, hosts with source IP addresses on network segment 192.168.1.0/24 match the rule from 8:00 to 18:00 on workdays.
With the development of data centers, a large number of services are deployed on virtual machines (VMs). The original VLAN isolation solution cannot achieve isolation between so many VMs. VXLAN uses VXLAN Network Identifiers (VNIs) to provide a larger range than VLAN IDs, so that a larger number of VMs can be isolated.
Assume that the IP address of GE0/0/0 on R1 is 10.0.12.1/24. Multiple commands can be used to enable OSPF on this interface. Match the commands with their configuration views.
The traditional Fat AP networking usually applies to WLANs of small and micro stores. For a large-scale WLAN, the WAC + Fit AP networking is typically used. Which of the following statements are true about the WAC + Fit AP networking architecture? (Select all that apply)
In Layer 3 in-path WLAN networking, the WAC and Fit APs are connected at Layer 3. APs can obtain the WAC’s address through broadcast or DHCP.
On the switched network shown in the figure, STP is enabled on all devices. The priorities, bridge MAC addresses, and port costs of the devices are shown in the figure. Other parameters retain the default values.
After the network is stable, which of the following statements are false about this scenario? (Select all that apply)
With the continuous update and development of data center services, the architecture of general-purpose computing data center networks is also evolving. A cloud-based data center uses a cloud platform to centrally integrate resources and deliver compute, storage, and network services. Which of the following network architectures is used by such a data center?
Assume that PC1 and PC2 can communicate with each other. When R1 forwards a data packet sent from PC1 to PC2, which of the following statements are true?
Defining OSPF areas in a large network helps reduce the size of the LSDB maintained by each router. If both R1 and R2 are assigned to area 1, they have the same LSDB within that area.
On the network shown in the figure, the three PCs belong to VLAN 2. When configuring interface-based VLAN assignment, the administrator only forgets to configure the PVID of GE1/0/1. However, PC1 can still communicate with PC2 at Layer 2.
On a switched network, the administrator has completed the VLAN-related configuration shown in the figure on SW1. If the administrator runs the ping 192.168.1.2 command on PC1, the ping will fail.
OSPF supports the division of a network into areas, each identified by an area ID that ranges from 0 to 255. Area 0 is designated as the backbone area.
Huawei network devices such as switches and routers can establish NETCONF channels with iMaster NCE-Campus through DHCP. The DHCP server notifies DHCP clients of the URL/IP address and port number of iMaster NCE-Campus through Option_____. (Enter only digits.)
Assume that the IPv6 address of GE0/0/0 on R1 is 2001:db8:12::1/64. Which of the following is the solicited-node multicast address of this IPv6 address?
During VLAN planning for a campus network, VLAN IDs for different service types must be allocated consecutively, without redundancy, to prevent omissions in future allocations.
On the switched network shown in the figure, STP is enabled on all devices. SW1 is the root bridge. The port costs are shown in the figure. Other parameters retain the default values. After the network is stable, which of the following paths is used by SW2 to send traffic to SW5?
