H19-301_V3.0 Huawei HCSA-Presales-IP Network Certification V3.0 Free Practice Exam Questions (2025 Updated)

In IP-based networks, routers use the destination IP address in the network layer header to determine the next hop for forwarding packets. The routing table contains entries that map destination IP addresses to outgoing interfaces or next-hop routers.

Source MAC and Destination MAC are Layer 2 (data link layer) addresses and are not used for routing decisions.

Source IP is irrelevant for routing, as the router focuses on delivering the packet to the destination IP address.

Thus, the correct answer is B , as routers use the destination IP address to make forwarding decisions.

Factors Affecting Wireless Rate:

The wireless rate (throughput) of a Wi-Fi AP depends on multiple factors, including hardware capabilities, environmental conditions, and configuration settings.

Explanation of Each Factor:

CPU performance:The AP's CPU processes data packets and performs tasks like encryption/decryption. Higher CPU performance enables better throughput.

SNR (Signal-to-Noise Ratio):A higher SNR indicates a stronger signal relative to noise, resulting in better data rates.

Spatial stream:Wi-Fi 6 supports multiple spatial streams (MIMO), increasing throughput by transmitting multiple data streams simultaneously.

Frequency bandwidth:Wider channels (e.g., 20 MHz, 40 MHz, 80 MHz, or 160 MHz) allow higher data rates but may increase interference in crowded environments.

Conclusion:All four options are factors that affect the wireless rate of a Wi-Fi AP.

Overview of Huawei CloudFabric 3.0:

Huawei CloudFabric 3.0 is a next-generation data center network solution that emphasizes automation, intelligence, and unified connectivity for diverse workloads.

Analysis of Each Differentiator:

Full-lifecycle automation:CloudFabric 3.0 provides end-to-end automation for provisioning, configuration, and management, reducing operational complexity.

Network-wide intelligent O&M:AI-driven tools enable proactive fault detection, analysis, and resolution, improving network reliability.

All-wireless access:This is incorrect. CloudFabric 3.0 focuses on wired Ethernet networks rather than all-wireless access.

All-Ethernet storage and HPC network:CloudFabric 3.0 supports unified Ethernet-based connectivity for storage, high-performance computing (HPC), and other workloads, simplifying infrastructure.

Conclusion:The correct differentiators are Options A, B, and D.

Huawei'shybrid cableis designed to future-proof network infrastructure by supporting ultra-long-distance power and data transmission. It eliminates the need for frequent cabling replacements, saving customers from the cost and effort of upgrading their cabling infrastructure multiple times.According to Huawei's official documentation, deploying hybrid cables can save customers10-15 yearsof cabling replacement workload in one deployment. This longevity is achieved through advanced materials and design that support higher bandwidth and extended power delivery over long distances.

Deployment Modes for AR Routers:

Huawei AR routers support multiple deployment methods to simplify configuration and provisioning in various scenarios.

Explanation of Each Mode:

USB-based deployment:Configuration files can be loaded onto the router using a USB drive, enabling zero-touch provisioning.

DHCP option-based deployment:The router obtains its configuration from a DHCP server, which provides necessary parameters such as IP addresses and configuration file URLs.

DCN deployment:Devices are automatically discovered and configured through the Data Communication Network (DCN), reducing manual intervention.

Email-based deployment:Configuration files or scripts can be sent to the router via email, allowing remote provisioning.

Conclusion:All four options are valid deployment modes for AR routers.

Huawei has been a leader in the telecommunications and networking industry for over two decades. The company invests heavily in research and development (R&D), with over11,000 R&D staffdedicated to advancing data communication technologies. This extensive R&D effort has enabled Huawei to innovate across various domains, including routing, switching, wireless, and security.The claim aligns with Huawei's official statements about its R&D capabilities and commitment to technological advancement.

The Huawei CE6863E-48S6CQ switch supports hardware-based Bidirectional Forwarding Detection (BFD), which enables rapid fault detection in the network. However, the claim that the minimum packet sending interval is 3.3 seconds is incorrect.

Hardware-based BFD typically supports much shorter intervals, often in the range of milliseconds (e.g., 3.3 ms, not 3.3 seconds). This ensures fast detection of link failures and minimizes downtime.

Thus, the statement is FALSE due to the incorrect interval value.

Huawei's L3 autonomous driving solution leverages AI and automation to enhance network performance through intelligent O&M. Below is an explanation of each capability:

Intelligent HQoS : Hierarchical Quality of Service (HQoS) ensures optimal resource allocation for critical applications. Intelligent HQoS dynamically adjusts policies based on real-time traffic conditions, improving application performance and user experience.

Intelligent network optimization : AI-driven algorithms analyze network traffic patterns and optimize routing, bandwidth allocation, and load balancing to maximize efficiency and reduce latency.

Real-time experience visualization : Visualization tools provide real-time insights into network performance and user experience. This enables administrators to quickly identify bottlenecks and take corrective actions.

Precise fault analysis : Advanced diagnostics and AI-powered analytics pinpoint the root cause of network issues with high accuracy, enabling faster troubleshooting and resolution.

All four options represent key capabilities of Huawei's intelligent O&M solution.

Overview of Huawei CloudFabric Easy Solution:

Huawei CloudFabric Easy Solution is designed to simplify data center networking through automation, ease of use, and scalability. Its key highlights are summarized under the acronym "EASY."

Explanation of Each Highlight:

EasY-Maintenance:The solution simplifies network operations and maintenance, reducing complexity and operational costs.

Expandability:While expandability is important, it is not one of the four "EASY" highlights explicitly mentioned in the official documentation.

Simplification:The solution focuses on simplifying network deployment, configuration, and management.

Easy Sales:This is not part of the "EASY" highlights. The term refers to technical benefits rather than sales processes.

Automation:The solution leverages automation to streamline tasks such as provisioning, monitoring, and troubleshooting.

Conclusion:The four highlights of Huawei CloudFabric Easy Solution are EasY-Maintenance, Simplification, and Automation.

Understanding Multi-GE Switches:

Multi-GE switches support ports with speeds higher than 1 Gbps but lower than 10 Gbps, such as 2.5 Gbps or 5 Gbps. These switches are ideal for high-density Wi-Fi 6 deployments and other bandwidth-intensive applications.

Analysis of Each Series:

S5731-H:This series includes multi-GE ports, making it suitable for high-speed access and aggregation scenarios.

S5736-S:This series does not include multi-GE ports; it primarily supports standard 1 Gbps and 10 Gbps interfaces.

S6730-H:This series supports multi-GE ports and is designed for high-performance campus networks.

S5732-H:This series includes multi-GE ports and is optimized for enterprise campus and branch networks.

Conclusion:The S5731-H, S6730-H, and S5732-H series switches are multi-GE switches.

Application-layer DDoS attacks target specific applications or services, such as HTTP floods or DNS amplification. Below is an analysis of each option:

AntiDDoS : This product is specifically designed to detect and mitigate DDoS attacks, including application-layer attacks. It provides real-time traffic analysis and automated mitigation capabilities.

FireHunter : This is a sandbox solution used for detecting advanced threats and malware. It is not designed to defend against DDoS attacks.

USG6000E : This is a next-generation firewall that provides basic DDoS protection but lacks the specialized capabilities of AntiDDoS for large-scale attacks.

HiSec Insight : This is a security analytics platform that provides visibility into threats and vulnerabilities. While it can help identify DDoS activity, it does not actively mitigate attacks.

Thus, the correct answer is A , as AntiDDoS is the best-suited product for defending against application-layer DDoS attacks.