USGBC LEED-Green-Associate Practice Test Questions Answers

ASHRAE stands for the American Society of Heating, Refrigerating and Air-Conditioning Engineers, a professional organization that develops standards and guidelines for the design, operation, and maintenance of buildings. ASHRAE standards are applicable to two LEED categories: Energy and Atmosphere (EA) and Indoor Environmental Quality (IEQ). The EA category addresses the energy performance, efficiency, and renewable sources of buildings. The IEQ category addresses the indoor air quality, thermal comfort, lighting quality, and acoustic performance of buildings. Some of the ASHRAE standards that are relevant for these categories are: ASHRAE Standard 90.1 for energy efficiency;ASHRAE Standard 62.1 for ventilation; ASHRAE Standard 55 for thermal comfort; ASHRAE Standard 189.1 for high-performance green buildings1 . References: LEED v4 Green Associate Candidate Handbook1, ASHRAE’s Standards & Guidelines

Setting project goals is the action that the design team should conduct first in order to incorporate green building strategies in a six-story commercial building renovation project. Setting project goals is an important step in the integrative process that defines the vision and expectations for the project’s sustainability performance and guides the decision-making throughout the design and construction phases. Setting project goals involves engaging key stakeholders, such as owners, users, designers, contractors, and operators, and identifying measurable objectives, targets, and metrics for various aspects of green building, such as energy efficiency, water conservation, material selection, indoor environmental quality, site selection, and transportation access. The LEED Green Associate Candidate Handbook states that one of the steps in the integrative process is to “establish sustainability goals early in project development” [1, p. 12]. References: LEED Green Associate Candidate Handbook, [Integrative Process | U.S. Green Building Council]

One of the causes of surface water degradation is the expansion of impervious surfaces. Impervious surfaces are those that do not allow water to infiltrate into the soil, such as roads, parking lots, rooftops, and sidewalks. Impervious surfaces increase the amount and speed of stormwater runoff, which can carry pollutants, sediments, nutrients, and pathogens into surface water bodies such as streams, rivers, lakes, and oceans. Impervious surfaces also reduce groundwater recharge, lower base flow in streams, increase flooding and erosion, alter streammorphology and habitat, and affect water temperature and dissolved oxygen levels2. Therefore, impervious surfaces can have significant negative impacts on the quality and quantity of surface water resources. References: Surface Water as a cause of land degradation from dryland salinity3; What is Water Pollution?4

ASHRAE 90.1-2010, Appendix G is the referenced standard for defining the baseline building performance for energy simulation modeling in LEED v4 for Building Design and Construction. The baseline building is a hypothetical building that represents the minimum energy performance required by ASHRAE 90.1-2010, which is a standard for energy efficiency in buildings. The baseline building is used as a benchmark to compare the proposed design of the project and to calculate the percentage of energy cost savings achieved by the project. The baseline building performance is evaluated by following the procedures and assumptions specified in Appendix G of ASHRAE 90.1-2010, such as building envelope, lighting, HVAC systems, service water heating, and renewable energy.

The other options are not relevant to the question, as they are standards for different aspects of green building, such as thermal comfort (ASHRAE 55-2010), air filtration (ASHRAE 52.2-2007), and ventilation (ASHRAE 62.1-2010).