FCP_FCT_AD-7.2 Fortinet FCP-FortiClient EMS 7.2 Administrator Free Practice Exam Questions (2025 Updated)

Based on the CLI output from FortiGate:

The configuration shows the use of "type fortiems," indicating that FortiGate is set up to interact with FortiClient EMS.

The "server" field points to an IP address (10.0.1.200), which is typically the address of the FortiClient EMS server.

The configuration includes an SSL-enabled connection, which is a common setup for secure communication between FortiGate and FortiClient EMS.

Thus, the configuration indicates that FortiGate is set up to pull user groups from FortiClient EMS.

References

FortiGate Security 7.2 Study Guide, FSSO Configuration Section

Fortinet Documentation on FortiGate and FortiClient EMS Integration

Understanding Compliance Rules:

The compliance rule for the sales department needs to be enforced dynamically.

Enforcing Compliance:

FortiGate is responsible for enforcing compliance by integrating with FortiClient EMS to apply dynamic access control based on compliance status.

Conclusion:

The Fortinet device that will enforce compliance with dynamic access control is the FortiGate.

References:

Compliance and enforcement documentation from FortiGate and FortiClient EMS study guides.

For managing the FortiClient web filter extension installed on the Google Chromebook endpoint, the EMS administrator can use the following component:

FortiClient EMS (Enterprise Management Server)is designed to manage and control multiple FortiClient installations across various endpoints.

EMS provides centralized management for endpoint policies, including web filtering configurations.

The EMS administrator can configure and enforce web filter policies on Chromebooks through the EMS console.

Therefore, FortiClient EMS is the correct component for managing the web filter extension on Google Chromebook endpoints.

References

FortiClient EMS 7.2 Study Guide, Chromebook Management Section

Fortinet Documentation on FortiClient EMS and Web Filtering for Chromebooks

Understanding the Automation Process:

In the Security Fabric, automation processes can include actions such as quarantining an endpoint after an IOC (Indicator of Compromise) detection.

Evaluating Responsibilities:

FortiClient EMS plays a crucial role in endpoint management and can send notifications to quarantine endpoints.

Conclusion:

The correct security fabric component that sends a notification to quarantine an endpoint after IOC detection is FortiClient EMS.

References:

FortiClient EMS and automation process documentation from the study guides.

Administrators can use several third-party tools to deploy FortiClient:

Microsoft SCCM (System Center Configuration Manager): SCCM is a robust tool used for deploying software across large numbers of Windows-based systems. It supports deployment of FortiClient through its software distribution capabilities.

Microsoft Active Directory GPO (Group Policy Object): GPOs are used to manage user and computer settings in an Active Directory environment. Administrators can deploy FortiClient to multiple machines using GPO software installation settings.

These tools provide centralized and scalable methods for deploying FortiClient across numerous endpoints in an enterprise environment.

References

FortiClient EMS 7.2 Study Guide, FortiClient Deployment Section

Fortinet Documentation on FortiClient Deployment using SCCM and GPO

FortiClient EMS is designed to provide centralized management and control of multiple endpoints running FortiClient software. It serves as a central management server that allows administrators to efficiently manage and configure a large number of FortiClient installations across the network.

FortiClient supports initiating the following VPN types from the Windows command prompt:

IPSec VPN:FortiClient can establish IPSec VPN connections using command line instructions.

SSL VPN:FortiClient also supports initiating SSL VPN connections from the Windows command prompt.

These two VPN types can be configured and initiated using specific command line parameters provided by FortiClient.

References

FortiClient EMS 7.2 Study Guide, VPN Configuration Section

Fortinet Documentation on Command Line Options for FortiClient VPN

Understanding the Need for Root CA Certificate:

The root CA certificate of FortiClient EMS is necessary for FortiGate to trust certificates issued by FortiClient EMS.

Evaluating Use Cases:

FortiGate needs the root CA certificate to establish trust and validate certificates issued by FortiClient EMS.

Conclusion:

The primary reason FortiGate needs the root CA certificate of FortiClient EMS is to trust certificates issued by FortiClient EMS.

References:

FortiClient EMS and FortiGate certificate management documentation from the study guides.

Requirement:

The administrator needs to add an authentication server on FortiClient EMS in a different security zone that cannot allow a direct connection.

Solution Analysis:

The goal is to securely connect FortiClient EMS and the Active Directory server despite being in different security zones.

Evaluating Options:

Installing FortiClient EMS on the same VM as Active Directory (option B) is not practical due to security zone separation.

Configuring a slave FortiClient EMS on a virtual machine (option C) does not address the need for secure communication.

Configuring an Active Directory connector (option D) may not be sufficient without secure routing.

Conclusion:

Deploying a FortiGate device between FortiClient EMS and the Active Directory server ensures secure and controlled access between the two zones.

References:

FortiClient EMS and FortiGate configuration and deployment documentation from the study guides.

Understanding FortiClient EMS Components:

FortiClient EMS manages and configures endpoint security settings, while FortiClient installed on the endpoint enforces protection and checks security posture.

Evaluating Responsibilities:

FortiClient performs the actual enforcement of security policies and checks the security posture of the endpoint.

Conclusion:

The component responsible for enforcing protection and checking security posture is FortiClient (C).

References:

FortiClient EMS and endpoint security documentation from the study guides.

Understanding ZTNA Rule Configuration:

The ZTNA rule configuration shown in the exhibit defines how traffic is managed and controlled based on specific tags and conditions.

Evaluating Rule Components:

The rule includes security profiles to protect traffic by applying various security checks (A).

The rule also enforces access control by determining which endpoints can access the specified resources based on the ZTNA tag (D).

Eliminating Incorrect Options:

SNAT (Source Network Address Translation) is not mentioned as part of this ZTNA rule.

The rule does not define the access proxy but uses it to enforce access control.

Conclusion:

The correct statements about the ZTNA rule are that it applies security profiles to protect traffic (A) and enforces access control (D).

References:

ZTNA rule configuration documentation from the study guides.

Based on the Zero Trust Tagging Rule Set configuration shown in the exhibit:

The rule set includes two conditions:

AV Software is installed and running

OS Version is Windows Server 2012 R2 or Windows 10

The Rule Logic is specified as "(1 and 3) or 2," meaning:

The endpoint must have antivirus software installed and running and must be running Windows 10.

Alternatively, the endpoint must be running Windows Server 2012 R2.

Therefore, the endpoint must satisfy either:

Antivirus is installed and running and Windows 10 is running.

Windows Server 2012 R2 is running.

References

FortiClient EMS 7.2 Study Guide, Zero Trust Tagging Rule Set Configuration Section

Fortinet Documentation on Configuring Zero Trust Tagging Rules and Logic

Requirement Analysis:

The administrator needs to maintain a software vulnerability scan on endpoints without showing the feature on FortiClient.

Evaluating Options:

Disabling the feature in the deployment package or endpoint profile would remove the functionality entirely, which is not desired.

Using the default endpoint profile may not meet the specific requirement of hiding the feature.

Clicking the hide icon on the vulnerability scan profile assigned to the endpoint will keep the feature active but hidden from the user's view.

Conclusion:

The correct action is to click the hide icon on the vulnerability scan profile assigned to the endpoint (C).

References:

FortiClient EMS feature configuration and management documentation from the study guides.