Month End Sale Special - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmaspas7

Easiest Solution 2 Pass Your Certification Exams

300-425 Cisco Designing Cisco Enterprise Wireless Networks (ENWLSD) Free Practice Exam Questions (2026 Updated)

Prepare effectively for your Cisco 300-425 Designing Cisco Enterprise Wireless Networks (ENWLSD) certification with our extensive collection of free, high-quality practice questions. Each question is designed to mirror the actual exam format and objectives, complete with comprehensive answers and detailed explanations. Our materials are regularly updated for 2026, ensuring you have the most current resources to build confidence and succeed on your first attempt.

Cisco 300-425 Premium Access     Download Demo    
Page: 5 / 5
Total 286 questions

How does AP failover priority for access points function when configured with priority 1 or 4?

A.

When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.

B.

When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.

C.

When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.

D.

When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.

Which feature ensures seamless roaming between APs with no noticeable delay for voice clients?

A.

Client load balancing

B.

802.11k

C.

802.11r Fast Transition

D.

802.11d

During a post-deployment site Survey, issues are found with non wi-Fi interference. What should the engineer use to identify the source of the Interference?

A.

Network analysis module

B.

Wireless intrusion prevention

C.

Wireshark

D.

Cisco spectrum expert

A wireless engineer is preparing for a meeting with a customer to discuss a new wireless network design. The customer is a company that develops code and occupies a three-story building. Which two information points does a presite survey questionnaire contain? (Choose two.)

A.

total number of access points in use

B.

client devices that will connect to the wireless network

C.

access point density required

D.

model of the wireless controller

E.

applications that will run over the wireless network

An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?

A.

The edge of the cell should be -67 dBm.

B.

The edge of the cell should be below 35 RSSI.

C.

The measurement should be done on the 2.4-GHz band.

D.

One AP should be deployed per 3000 square feet.

Cisco 300-425 Premium Access     Download Demo    
Page: 5 / 5
Total 286 questions
Copyright © 2014-2026 Solution2Pass. All Rights Reserved