NSE6_FWF-6.4 Fortinet NSE 6 - Secure Wireless LAN 6.4 Free Practice Exam Questions (2025 Updated)

The correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs is to create a new FortiAP profile and change the country code settings on the profile. This is because the country code settings determine the legal RF channels and transmission power limits for each country, and they are applied at the FortiAP profile level. By creating a new FortiAP profile for the remote APs, you can specify the correct country code for Germany and assign it to the APs. This will ensure that the APs comply with the local regulations and avoid interference with other devices. Configuring the APs individually by overriding the settings in Managed FortiAPs is not recommended, as it is tedious and error-prone. Configuring the controller for the correct country code for Germany is not possible, as the controller can only have one country code setting, which should match its physical location. Cloning a suitable FortiAP profile and changing the county code settings on the profile is not advisable, as it may cause conflicts with other settings that are specific to the original profile. References: Secure Wireless LAN course description, [FortiOS 6.4.0 Handbook - Wireless Controller]

According to the web search results, the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration is static. This means that the FortiAP sends discovery requests to a preconfigured IP address that the controller owns. This is useful if the FortiAP and the controller are not in the same subnet and other discovery methods will not work. The other discovery methods are used in sequence if the static method fails or is not configured. References: Advanced WiFi controller discovery | FortiAP / FortiWiFi 7.4.0

FortiPlanner is a wireless network planning and deployment tool that helps to design and optimize wireless networks based on various parameters, such as floor plans, AP models, coverage areas, and client density. FortiPlanner uses a predictive model in wireless design projects, which means that it estimates the wireless coverage and performance based on mathematical calculations and simulations, without requiring any physical measurements or site surveys. References: FortiOS 6.4.0 Handbook - Wireless Controller, page 5; [FortiPlanner User Guide], page 9.

The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.

The RADIUS user attributes used for the VLAN ID assignment are:

IETF 64 (Tunnel Type)—Set this to VLAN.

IETF 65 (Tunnel Medium Type)—Set this to 802

IETF 81 (Tunnel Private Group ID)—Set this to VLAN ID.

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic, such as antivirus, web filtering, application control, and IPS. This feature is called local bridging and it allows the FortiAP to forward traffic to the FortiGate for security inspection before sending it to the destination network. This reduces the bandwidth consumption and latency of tunnel mode SSIDs. References: Secure Wireless LAN Course Description, page 9; [FortiOS 6.4.0 Handbook - Wireless Controller], page 46.